qlogic

Hi, someone know if ProxMox VE is compatible with the FC card "HP StoreFabric SN1100Q 16Gb 2-Port FC HBA" ? What I know is that card hosts a Marvell QLogic controller here the links of that card...

Hi, I have problem run CNA card Qlogic qle8142 on proxmox server. I want use this card as NIC. I can see interfaces from this card in proxmox network management, also I can see interfaces after ip a list. But after insert SFP module (I tried twinax too) and connect to switch nothing happend and...

Hello everyone! For some backstory, I upgraded my server, and I keep backups of all my containers and VMs on a NFS share. I have never had any issues restoring said backups, until today. After a fresh install of Proxmox 7.0-1, I went to restore my backups and it took longer than 15 minutes (the...

Hello! This is the second (2462 and 2532) FC I have used from qlogic and I am running into problems when scanning for the SAN to be recognized by the system: scsi 3:0:0:0: lun4194304 has a LUN larger than allowed by the host adapter scsi 3:0:0:0: lun4194560 has a LUN larger than allowed by the...

Hi all, i'm working now for 5 days on installing a Fujitsu Externus dx100 S5 - Storage on Proxmox. I use a Q-Logic QLE2692 Card for a direct FibreChannel connection. If i use a Windows VM and pass this card to this VM directly, i can see and interact with the Storage without any Problems. So...

Hallo zusammen, ich verzweifel seit 4 Tagen an der Aufgabe einen Fujitsu Externus dx100 s5 - Storage über FibreChannel an meinen Proxmox (aktuellste stable Version) anzubinden. Dazu habe ich auf meinem Server eine Q-Logic QLE2692 PCi Karte eingebunden. Diese ist mittels FC-Glasfaser direkt mit...

Hi Proxmoxers. After restarting PVE nodes previously upgraded from 5.3.13-1 to 5.4.65-1 kernel, we lost connectivity with LUNs provided by Fujitsu Eternus DX100 S4 - FC interface connected to QLogic 2692 Host Bus Adapters in servers. It's not multipath issue, as we cannot see the storage devices...

Hi, I do not see my QLogic FastLinQ QL45212-DE 25Gb NIC in network settings. System loaded qede kernel module but I think the driver is missing and it does not show up in ip a. lspci output is in the attachment. Onboard Intel NICs work without issues. Is there a trick I am missing?

I was looking at QLE8142 product overview at figure 1-2 "Combined SAN and LAN Function on One Converged Network Adapter" on page 1-3 "QLogic Converged Network Adapter", where this image can be found: Do you think those bandwidths are fixed, 4Gb FC and 1GbE per port, or they are distributed...

English: Hi all! I'm working on this since 2 months and could narrow it down a bit today . The setup is HP ML350 G10 and an IBM 1746 Storage connected via 8GBit FC. The HP contains 2x Qlogic QLE2562 HBAs. To the Problem: When running on Proxmox 6 on the software level of the downloaded ISO or...

I'm new to Proxmox and I am having a problem with Proxmox recognizing the NIC. I have a QLogic 2x25GE QL41262HMCU CNA NIC. I have the Linux drivers from QLogic, but I'm having trouble installing the drivers. Any suggestions? Thank you!

It seems that while 4.2 came with a blast of fresh air, it has broken my box. I have Qlogic dual port fiber cards. I'm using IOMMU to give these cards to my guest system. After upgrade from 4.1 it has only on card available to guest. lspci: 01:00.0 Fibre Channel: QLogic Corp. ISP2432-based...

Hi everyone I'm sorry that I'm asking this question in this forum, but I don't know where else I could get a answer to my question. I'm a newbie to FC HBA but we just got many servers from our clients that won't be used anymore. I wanted to build a SAN with 3 proxmox nodes. My questions are...

Hi: I have searched the forum, but couldn't find any post related to my problem on Proxmox VE 4.1. After installing Proxmox VE 4.1, I ran apt-get update and apt-get dist-upgrade. During the upgrade process I received the following message: "Possible missing firmware...