We have an overlay network (configured as described below) which worked fine on PVE6.4 but after migrating the containers to a PVE 7.2 node have noticed some odd behavior, with packets above a certain size being discarded by the vxlan interface, but only when sent from a container, VMs continue...
After apt update / upgrade my kernel went from 5.11.22-7-pve to 5.15.64-1-pve but now gets stuck at 'Loading initial ramdisk...'
Adding the nomodeset makes no difference, still no messages are shown.
Starting PVE with the 5.11.22-7-pve kernel works without issues.
I run PVE on:
ich habe das System von pve 6.4.x auf 7.2.11 nach der offiziellen Anleitung per In-Place Upgrade aktualisert.
Das hat soweit auch bestens geklappt, alle Container und VM's ließen sich danach normal starten und laufen bis auf den VPN auch wie gewohnt.
Als VPN hatte ich...
I have a fresh install on two sata SSDs on ZFS - Raid1 which performs very slow on restore from NAS (via NFS)
NAS is connected to 100mbps link, even on such link backup durations is about 3 mins but restore is about 30 mins (vm is new about 1.7GB)
My observation was that on restore NAS was...
So I am running PVE7.0-13 and was able to get a Windows 11 VM working and it looks great I must add. The issue began after I decided to deploy cloubase-init for Windows and that also is working as a charm following some developments on a different thread on this forum. However after marking the...
Originally posted as a reply here: https://forum.proxmox.com/threads/migration-fails-pve-6-2-12-query-migrate-failed.78954/post-429694
"We're seeing this as well, though without the overflow during RAM transmission. More info further into this reply."
This problem was discovered following a...
I have here 2 HP Servers which have the same problems (3 more servers of dL380 with older PV which are working):
* SATA and SSD HD are well working
* SAS RAID is extremly slow. Backup recover with wmrestore from 30 GB HDD needs 5 hours.
Gen8: Smart Array P420i on Gen9: Smart Array P840 ...
I recently upgraded my pve 6 server (dedicated server RISE-1 at OVH), following this guide: https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0#Check_Linux_Network_Bridge_MAC
The upgrade went fine, but after a reboot, the server did not answer to ping, SSH, HTTP, etc.
Hello for Everyone, We updated to pve-manager/7.0-11/63d82f4e (running kernel: 5.11.22-4-pve) two week ago and after that I found this bug that disable the proxmox web and ssh access and stop somehow that I have not been able to understand. I need to force reboot and the services starts ok, I...
!!! This is NOT ment for production use and is NOT official supported !!!
Huge Thanks to Tim Wilkinson who made this possible!
more details and sources can be found @ https://github.com/pimox
I will devide this Tutorial in 2 Parts. The first part will only cover a very basic...
Upgrade auf Proxmox 7 (Kernel >= 5.10) bringt alle VMs zum Hängen
Ich habe einen großen VPS bei einem deutschen Host (mit N beginnend). Das Host-System verwendet einen AMD EPYC 7702P und eine unbekannte KVM-Version. Mir wurde das SVM-Flag des Prozessors...
As I tried to update a node this morning to latest FRR version, i get into a problem related to the latest FRR version (7.5.1-99+pve~really7.4) which has an issue regarding set src route-map instruction. The issue encoutered is exactly this one ...
In our company today I tried to upgrade Proxmox from version 6.x to version 7.
The upgrade completed correctly (via apt), but after GRUB, the monitor displays an Out of range message. I tried about 4 different monitors. All monitors showed a similar message (See Picture 2).
The last screen I...
I love the new ACME certificate feature available in PVE 6/7. I created an internal ACME server, and tested it using one of our PVE7 servers. After some infrastructure changes occurred, the ACME server was moved to a new hostname, for example, `acme.example-a.com` ->...
I have a 3 node cluster and one node updated from 6.4 to 7.0. For the Linbit controller and DRBD I use this repository: "deb http://packages.linbit.com/proxmox/ proxmox-7 drbd-9.0 ". I followed all the steps in https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0 and had no visible errors during...
I have been scratching my head with why I can not do a normal upgrade of my system. It started a couple of days ago until the point where I decided to begin with a clean install of PVE 7.0. But after having everything setup, the same problem comes up even before I do any changes on the...
I want to setup a Proxmox instance, so that it is accessable via a public domain, by going to https://pve.domain.com, logging in and using it, as you would do it under it's local IP e.g. https://10.0.1.2:8006.
One special thing to mention, is that between my Router (port forwarding) and...
Using ifupdown, the following config used to be valid and correctly displayed in the Proxmox VE 7 webinterface:
iface vlan1120 inet static
Using ifupdown2 there is no need to add inet static any longer. See...
Ich habe mich heute am Upgrade zu PVE7 versucht und natürlich alles gesichert, leider ist irgendwas schief gegangen und ich musste einen meiner Nodes neu Aufsetzen.
Das Backup von /etc habe ich ja, aber ich finde einfach nicht heraus wie ich das nun zurückspielen kann.
Nachdem ich auf pve7 geupdatet habe starten meine lxc mit installiertem docker, docker nicht mehr.
Ich vermute, dass es an cgroup Version 2 liegt.
Folgende zusätzlich Optionen sind zur Zeit aktiviert:
- lxc.cgroup.devices.allow = a
- lxc.apparmor.profile: unconfined