pve

Hello starter here and i am thinking to install PVE on 2 dedicated SATADOMs (as mirroring boot drives), in order to save 2 sata slots from my mobo. Supermicro's solutions are these below: 64GB with READ/WRITE = 520/95 MB/S 32GB with READ/WRITE = 280/50 MB/S For both drives, supermicro gives...

It seems that PVE started to use Ubuntu based kernels since Xenial. It is not hidden, but it is not explained as a choice either (at least where I searched). 1. What are the reasons (in order of importance) for this? Hardware support? Feature-set? Security? Something else? 2. What will I break...

Hallo, ich habe noch bis vor kurzem ESXI und Veeam Backup genutzt, da ich immer mehr Open Source einsetze möchte PVE / PBS interessante Features bieten migriere ich gerade darauf. Bisher hatte ich die Backups vom Host mit Veeam ins Rechenzentrum gemacht über eine herkömmlich DSL Leitung (100...

Hi We have the following setup: 1 PVE Cluster with 4 nodes (each with 2 EPYC CPUs) and 256 GB RAM, and 8 x 2TB Enterprise NVMe u.2 disks) - storage CEPH on a separate 10GB network 1 PBS server integrated into PVE with 2 x 1TB (z1) SAS Enterprise disks and an HP LTO Tapedrive 15TB 1 TrueNAS...

Good morning all! I have a Proxmox cluster running with two hosts, with the following versions: Both running PVE 8.1.3 Host 2 (newest) - Kernel 6.5.11-5-pve (community edition w/o subscription Just added subscription w/enterprise repo). Last updated last night ~10pm US EST Host 1 (the 'OG') -...

I just bought a brand new WD 2TB Elements portable drive, connected using both USB3 and USB2 but the drive does not show under Disks, the drive works fine on my windows machine? I get communications error, could it be the type of USB3 connector with the newer WD drives? I can see my old...

I'm not really looking for support here because I have everything working now with 8.0 and that's enough. I'm more writing as a 'bug report' of sorts. I have purchased a new box intended for use as a router/firewall/etc with Proxmox VE at the top level. i7-1265u, 64Gb DDR4-3200 RAM, 1Tb main...

Buenas a todos. Tengo un problema que no sé solucionar. Retiré un disco duro que formaba parte de pve en /etc/lvm/backup, y ahora me da un error constante que no lo encuentra. No sé como hacer para que deje de mostrarme el error cada vez que quiero hacer una instantánea de alguna de mis...

Hi, are these relevant? https://github.com/openzfs/zfs/issues/15526 https://github.com/openzfs/zfs/issues/15533 https://github.com/openzfs/zfs/issues/14533 https://www.reddit.com/r/zfs/comments/1826lgs/psa_its_not_block_cloning_its_a_data_corruption/ As the first issue is regarding openzfs...

Hi, I have Dashy setup trying to monitor pve & pbs. However I'm not able to work out if there is a port that is available that will return 200 ok if requested. Below is an extract from Dashy, Custom status check endpoint for this item. Useful if the default URL doesn't return 200, or if your...

Hi, my local-lvm is almost full and I don't know what to do to fix this. I still don't fully understand what local-lvm is or how it works, compared to "local" (which is cleared with no issues). I tried fstrim on all my VMs and Containers. That only freed about 10 GB out of what's being used -...

Hi I run a cluster of 8.0.4 nodes one of the HA containers seems to be special. When I start the backup, it would hang making the whole node unresponsive (grey question mark). although the other containers on that node seems to keep working. It does not matter if I run it in snapshot or suspend...

UPON LOST QUORUM (not indicated in the GUI), the attempt to access the node's OWN console ends up in generic: failed waiting for client: timed out TASK ERROR: command '/usr/bin/termproxy 5900 --path /nodes/pve7 --perm Sys.Console -- /bin/login -f root' failed: exit code 1 This is clearly...

Hello In the middle of the night I had an impulsive thought to update my proxmox 7.2 to proxmox 8. First I updated tot 7.4 then I changed the repo file and I tried to apt dist-upgrade. It gave some error codes so I tried to reboot. After the reboot the system constantly gave a error with...

Hello together, I#m searching for a solution to move my local PVE Backups to PBS. Is that possible in any way? I did not found a solution in the PVE or PBS Docs. Any Ideas are welcome. Best regards 0zw00d

I would like to have Proxmox resolve its local name itself, without querying an external DNS. A (common) Debian system should actually be able to do this. However, my PVE (a Debian "onTop" installation) doesn't do that. My PVE has (as an example) the following names in the "/etc/hosts" are...

I have a small patch for PVE (adds a 10 minute timeout to booting VMs during backup), which I have been manually applying and re-applying after each PVE update. The re-applying is getting a bit tedious, so I was wondering if anyone might have suggestions on how to save this patch for...

I'm running some backups routines at the same time, but sometimes they don't run and show the message "INFO: trying to get global lock - waiting...", is there a problem running mutiple backups at the same time ? Can more than one vzdump process run at the same time ? Note: I'm using the latest...

I found a problem with copying the container to proxmox backup server. pve 6.4-8, Backup Server 1.1-12. As I understand it, due to old containers, upgrading to the latest versions can make containers non-working. Initially it was (log) 202: 2023-11-09 18:16:00 INFO: Starting Backup of VM 202...

I'm running PBS in a debian LXC on top of PVE. The PBS container is set to DHCP, with the IP reserved at the DHCP server. After upgrading PVE7 to PVE8, and subsequently PBS2 to PBS3, the PBS container gives the error "hostname 'pbs' does not resolves to any non-loopback address" after boot...