pve

  1. D

    [SOLVED] All Backups Started Failing

    Link To Solution Hey, I've recently started to experience failure in all of my backups. Shortly after I've realized that this has nothing to do with my backup servers because other people can still backup to them, so it's clearly something at my end. I've narrowed this down to an issue with...
  2. N

    PVE & PBS Hardware erwartet....

    Guten Tag zusammen, ist eine Tastatur, Maus und Bildschirm erforderlich, damit die oben genannten Server ordnungsgemäß booten und funktionieren? Beim PBS war nur Netzwerkkabel angeschlossen.... der Backup Server wollte nicht booten war immer nur am beheben....?! mfg
  3. M

    Split VM backup to multiple datastores for different disks

    Hello, I'm cureently in need of a very particular backup configuration. I need to backup different disks of the same VM to different backup targets. Is there a way to either: - modify the target datastore for a specific disk - exclude a disk from a specific backup job only - modify the target...
  4. D

    lm-sensors not detecting anything

    Hello guys so i had proxmox 7.X before was working fine but i reinstalled it on the same machine because i added an m.2 and i installed 8.1.4 but i cannot seem to get sensors to work, my kernel version is 6.2.16-3-pve and i have an AMD k10temp sensors-detect is detecting k10temp and adding it to...
  5. X

    Loading initial ramdisk hängt

    Hallo, auf einem Debian 12 wurde laut der Anleitung (https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_12_Bookworm) der PVE-Kernel mit 'apt install proxmox-default-kernel' installiert. Nach dem Booten bleibt der Server bei 'Loading initial ramdisk' hängen. Der Server lässt sich mit dem...
  6. E

    VMs FS error after backup destination storage is full

    Can it be so - NFS backup storage became full and VMs that was in this backup become with RO root partitions ?
  7. I

    Proxmox VE 8.1.4 - watchdog: BUG: soft lockup - CPU#X stuck for Xs

    Hello there. Since I connected my nodes to cluster I noticed on some Linux VMs I'm getting this error: I couldn't find any working solution for this. I suppose this has something to do with ZFS as one of my nodes where ZFS is not operating these VMs work without any issues. Do you have any...
  8. P

    [SOLVED] Cannot access Proxmox machine from macbook

    Hello there, I have successfully installed Proxmox VE, version 8.1.0. on Odroid H3. I set static IP to 10.0.0.98 and gateway to 10.0.0.1 during the installation. All worked fine until out of nowhere I can no longer connect to server from other local hosts on the same network. I can't see web...
  9. C

    A container always fails to backup to PBS

    PBS 2.4.6 and PVE 7.4.17 are all uptodate. Out of all the containers, only 1 always fails to backup to PBS. Once a day backup, and it would fail continuously for 9 days, and then it might be successful for 1-2 days, and fails again. Here is the output from email: 104 confluence FAILED...
  10. F

    pveproxy keep restarting cause my server to freeze on proxmox

    The problem i have with this server is the hardware and the OS is running but after 2 days on 10/02/2023 it just crash already gain more times i could remember and it just freeze and doesn't run. i would have to manually power off the power the server itself for it to work again. (please note...
  11. S

    [SOLVED] VM (Win11) frozen (post boot) on some... PVE Hosts

    Hi All, I have 4 new cluster nodes (Blade chassis) that I recently added to my proxmox cluster... They are not yet in production though in the testing phase I have run into a very strange issue. A new VM I just created (Win 11 Pro for WS) will boot and run just fine on my older nodes (2x Epyc...
  12. J

    To cluster PVEs that have VM.

    Hello,I have 2 Proxmox VE servers, and on each of them, I have 2 virtual machines. The first one is called PVE1 and the second one is called PVE2. I want to put these 2 PVEs (PVE1 and PVE2) under the same cluster. How can I do this, and what are the solutions that could make it work?
  13. J

    Reinstalling a Proxmox 7.4 node using backed-up files vs deleting and adding it back

    Hey everyone! So I have a 7-node cluster of PVE 7.4 and I need to reinstall one of the nodes because I did not REDACTED when installing it. I would like to keep the same IP address and hostname. The node is already empty (i.e., all LXCs and VMs have already been migrated to another node) and HA...
  14. N

    [SOLVED] Ceph unable to find a keyring

    Hello all, i just noticed, that one of my Cluster Nodes shows following log every 1-2 minutes: FYI: The Cluster works and Ceph is showing all OK Feb 08 01:18:52 pve-2 pvedaemon[3570]: <root@pam> successful auth for user 'monitoring@pve' Feb 08 01:18:54 pve-2 ceph-crash[2062]...
  15. C

    Issues with VZDump on LXC containers

    Hey Everyone. First I hope whoever sees this has a good day :) We're having an issue with our PVE cluster (v8.1.2) and backing up LXC containers that are run on a ceph pool It seems that sporadically and without cause, the snapshot stage of our backup job just fails, leaving the container...
  16. L

    PVE 8.1 Stuck on 'loading initial ramdisk'

    Please Help. Hello, very new to linux and proxmox, trying my hand with a home server, but having little joy. The problem at hand now is the PC hanging/no web GUI, but I will give a bit of background. I installed PVE 8.1 directly on a simple home PC (MSI Z690, i5-12600, 32gb ram, mellanox 10gbe...
  17. P

    Backup of my VMs stalls I/O (network and VM)

    My PVE runs off a mirrored ZFS on 2 SATA SSDs, when my nightly backup job starts, the whole system including the VMs will eventually grind to a crawl. During this time, even SSH connections have trouble getting through to PVE, however, SSH to VMs are fine. At the same time, my Windows VM also...
  18. M

    Backup LXC-Container - Passt das so?

    Hallo, ich habe in Proxmox das Backup der LXC-Container konfiguriert. In der Mail steht folgendes: Betreff: vzdump backup status (pve.local): backup successful Details: 100 debian01 ok 1min 3s 857.447 MiB /mnt/pve/nas/dump/vzdump-lxc-100-2024_01_28-11_29_44.tar.zst Logs...
  19. J

    Login über PVE-Web-Shell geht nicht

    Guten Morgen, ich kann mich über die Web-GUI nicht mehr in die Shell einloggen und bekomme folgenden Fehler: "TASK ERROR: command '/usr/bin/termproxy 5900 --path /nodes/home1 --perm Sys.Console -- /bin/login -f root' failed: exit code 1" Ich denke, dass es daran liegt, dass ich gestern die...
  20. D

    pve-cd-builder

    Hello everyone, I'm studying the pve-installer source code, when I run make check-pve the installer starts, after going through all the steps, an error occurs when I try to install the packages: unable to open file '../pve-cd-builder/tmp/data-gz//pve-base.squashfs' - No such file or directory...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!