dkms

Hello, I'm new to Proxmox and came from QNAP. I'm pretty new to all of these things and have almost zero knowledge about linux. Anyway, I'm trying to create VFs for my Intel 12400's iGPU (UHD 730) My goal is to assign a virtual iGPU to my Plex and Windows 11 VMs. Here's my hardware: -Intel...

Hi, I already recognized while updating to 6.5.11-7-pve some weeks ago, that pve-headers are not installed automatically like in the past. This causes a lot of hiccups with modules that shall be rebuild automatically via dkms. I have to upgrade pve-headers manually and then always rebuild the...

I did the upgrade path from 7 to 8 and saw a couple errors during the process but upon rebooting it started up fine, though when trying to do apt update / apt upgrade (or apt dist-upgrade) I get the following: apt dist-upgrade Reading package lists... Done Building dependency tree... Done...

Hi guys, i have no render device listen. root@pve:~# ls -lh /dev/dri total 0 drwxr-xr-x 2 root root 60 Jan 22 13:52 by-path crw-rw---- 1 root video 226, 0 Jan 22 13:52 card0 i trie to install the amd gpu driver for my 5650GE CPU. If i install (amdgpu-install --usecase=workstation...

Hi, I just updated my promox host after quite some time of it running stable and me traveling (so better not touch a running system). During update, I saw the following error: Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 5.15.74-1-pve...

I'm running Proxmox 7.0-2 on an AMD Ryzen 9 machine. How can I download or find the PVE headers. This is needed to install a wireless card on the server. [Error! Your kernal headers for kernal 5.11.22-4-pve cannot be found. Please install the linux-headers-5.11.22-4 pve package or use the...

Hello everyone, I got some problems settung up wireguard in a container (Debian 10) using latest Proxmox. I have seen tutorials, where one needs to install wireguard on the host and add the module via "dkms autoinstall". However, each time I tried this using pve-manager/6.1-7/13e58d5e...

Hi, I have a NUC with a thunderbolt 3 port to which I have connected a QNA-T310G1S. Its not showing up in lspci. 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Iris Plus...

!!! Disclaimer !!! This guide is yet to be tested. Looking for an owner of SX300, SX350 or PX600 cards to test this on a live platform and smooth out all the inconsistencies. The problems Fusion-Io drivers were designed with Enterprise OSs in mind (RHEL, SLES, ESXi, etc). Later on Sandisk was...

Hello! Occasionally the pve-kernel gets updated. I am using DKMS to compile the drivers for a device when the kernel gets updated. The catch lies in the fact that in order to compile those drivers, kernel headers are necessary and on update are missing. This results in the system becoming...

Foreword and update The guide was long overdue for an update, but luckily yesterday i've managed to test a couple of things that allow me to be quite certain that the setup is stable and can be used in production. Several notes. The drivers are based on snuf drivers. From my experience with...

When running apt dist-upgrade, I sometimes get the following warning message: run-parts: executing /etc/kernel/postinst.d/dkms 4.13.16-2-pve /boot/vmlinuz-4.1 3.16-2-pve dkms: WARNING: Linux headers are missing, which may explain the above failures. please install the...

Hello, To avoid reviving an old thread (https://forum.proxmox.com/threads/kernel-sources-for-driver-module-compilation.27063/#post-137594) I have decided to start a new post. As far as I can tell through querying apt-cache search linux-headers, there does not appear to be a rolling/updated...