dhcp

If you set a VNET on a "Simple" Zone, it allows you to set a dhcp range. For this to work, it must also have a "gateway" ip set, even if you are not planning on talking out. The "gateway" is the host IP that the dhcp server listens on.. When this is created it tests for the existence of the...

I'm another vmware admin who's looking at Proxmox as a potential transition option. I'm not doing anything particularly intensive, I just deployed a few hypervisor VMs (under ESXi) to get a feel for the system, deploying VMs, networking, etc. Everything is working fine so far, other than the...

Hello, I've been trying for hours to setup a basic proxmox server, but no luck, I can't connect to the server remotly. Tried different variations from the internet: Proxmox server commands: ip a cat /etc/network/interfaces ping google.com ping 192.168.1.1 cat /etc/resolv.conf I've attached my...

Hi, I'm having some trouble configuring the DHCP network interface with Proxmox VMs. Here is my network setup. Baremetal Server comes with ESXi 7 with one network interface (promiscuous mode enabled for vSwitch0). Here, I create two VMs. One pfSense 2.7.2 and Proxmox 8.1-2 ESXi Has two port...

Hi, posting to ask for help. I've been reading a bunch of different posts and trying different configurations without any success. I'm trying to setup my proxmox node to run OpnSense as a VM and use it as router and firewall. The main problem is that the WAN does not assign an IP from my modem...

Hello all, I am trying to set up my Proxmox PVE HOST to use DHCP to optain both an IPv4 and an IPv6 address for its Network interface. I would then manage the actual Addresses via static leases on my DHCP server. As the Guest VMs would have DHCP active and therefor pull IPs within the network...

Hallo zusammen, da ich aktuell eine Netzwerkumstrukturierung plane, würde ich gerne das DHCP Plugin für eine VLAN Zone verwenden. Gibt es einen abschätzbaren Zeitraum in welchem wir eine Implementation des DHCP Plugins für VLAN Zonen erwarten können? Danke im voraus :) VG

Hi folks- I'm new to Proxmox and I've run into a snag. I've got a script (below) to create a cloud-init template of Ubuntu Server (22.04 LTS), based on TechnoTim's video & blog. It creates the image, marks it as a template, and I even got it to resize the disk. The problem starts after I clone...

not a proxmox issue,just a general dhcp issue. Running a windows DC with dhcp, experiencing dhcp issues, clients not getting Ips taking long time etc. ran perfDHCP against the server and this is the result Running: perfdhcp -x i -t 2 -r 10 -R 100 10.a.b.c Scenario: basic. Multi-thread mode...

Hello! I have a pretty simple home network configuration, where my isp router acts as DHCP leasing IPs in range 192.168.100.2 - 192.168.100.254. On the screenshot you cah see DHCP config with a single allocated IP for my wifi AP. So I also have a Proxmox Host on 192.168.100.3, but this is a...

Hi all, i just upgraded from 7.4 to 8.1 and was trying to experiment with SDN. If I add a Simple zone, i cant seem to turn on DHCP anywhere. I did install dnsmasq. It's like there is no dhcp plugin at all. What am I missing?

Hi, I configured 2 Proxmox 8.1.3 servers in one cluster and configure SDN zones as VXLAN. 1. No option turn on DHCP 2. When SNAT checked on subnet, no snat rules /etc/pve/sdn/zones.cfg vxlan: vxlan peers 10.33.3.20,10.33.3.21 ipam pve mtu 1450 nodes pve1,pve...

Hello, i got problems with DHCP, i can't get it running for my vm's everytime i need too set it up manuel ip's and some images that im using for vm can't not easy be setup manuel... I have read a thread of a staff, he said that Monitoring Mode is needed for Wifi Brige, i got that but everytime...

Hi, I'm testing the new SDN feature with some servers that are going in DC soon, I only get DHCP working with the simple zone. I can recall that I read somewhere that it was only working with the simple zone, is that still true, and if so is there any idea when it will work with vxlan? like a...

I have spend nearly a week trying to make it work. Followed several guide but nothing my VM does not access to internet. I am installed proxmox on machine and created a VM running archlilnux. The IP of the machine is assigned with DHCP. The configuration below does not work. I have tried to...

I'm having a bit of a hard time getting an Ubuntu 22.04 container (made from the proxmox provided ubuntu 22.04 template) working properly in regards to DHCP and IP addresses. The container is configured with a single network device and specific MAC address of 1:2:3:4:5:6 (MAC edited for...

As I had just followed the instructions to install PVE on top of Debian, I realised the node relies on static IP - it was kind of obvious during the ISO install, but during APT install it clearly has to go into /etc/hosts with a static IP - why is this and does it have to be hardcoded for each...

Hello, I have an issue with a VLAN I created in pfSense (bare metal) and I just can't figure out what is wrong in Proxmox. I have a freshly created Ubuntu VM (with only docker installed), I have created a new vmbr1 bridge that is VLAN aware and assigned it the VLAN subnet (not sure if current...

Hint: Nebula != Open Nebula Hello greetings, I am experimenting with Nebula (https://github.com/slackhq/nebula) in order to create an overlay network for VM that are distributed over multiple Proxmox Machines on several locations. I would like to add DHCP to the internal bridges that should...

Hi all! I recently installed proxmox on my server, and now I'm trying to get networking in order. The problem that I have, is that for a certain VLAN, the DHCP response from my DHCP server doesn't seem to end up in my VM. It does seem to reach proxmox, but there's nothing arriving in the VM...