bug

Describing here a problem encountered. noteworthy is previously there were hugepages configured with the VM running and these were subsequently removed. Proxmox did not catch this imho. Booting a VM where the CPU configuration had pdpe1gb flag enabled this appeared to have resulted in initially...

Hey guys, I think there is a bug @ PVE's firewall when doing vlans. Here's my setup: Home "server" - PVE 6.2-4 - only has 1 Ethernet interface. 1. Mikrotik router connected to fiber-ONT bridged port - gets an external IP via DHCP and does nat / masq on 192.168.100.0/24 for the internal...

A fresh installation of PVE 6.2 from the official ISO, during the installation, the ethernet cable was plugged into the first ethernet port. The network was detected, configured and the installation finished successfully. After rebooting into the installed system, there is no network...

* New installation on the server, on the first disk. No problem. Reboot. Connecting to WebGUI - OK. * Also, i am connect via ssh, from the remaining disks I create Soft RAID 6( don't ask why, it just happened))) ). The result is a raid disk of more than 4 Tb (/dev/md0). * Next. I make : pvcreate...

Hallo, ich habe gerade einen Proxmox Server installiert. Ich kann über das Webinterface nicht auf dessen Konsole zugreifen. Fehler: timed out waiting for client TASK ERROR: command '/usr/bin/termproxy 5900 --path /nodes/Proxmox --perm Sys.Console -- /bin/login -f root' failed: exit code 4...

VM conf bootdisk: scsi0 cores: 4 cpu: host hotplug: disk,network,usb,memory,cpu ide2: none,media=cdrom memory: 4096 name: debian numa: 1 numa0: cpus=0-3,hostnodes=0,policy=bind,memory=4096 onboot: 1 ostype: l26 scsi0: local:101/vm-101-disk-0.raw,size=25G scsihw: virtio-scsi-pci serial0: socket...

I have the problem that if I don't log in to the webinterface for a day or more, I only see grey question marks and the server doesn't respond to any of my input. I have to restart the server manually to get it working again. rebooting via ssh is not possible either. if i want to find out what...

Hallo, ich habe mir gerade einen TeamSpeak-Server aufgesetzt. Hat alles gut funktioniert. Dann habe ich auf der Konsole einfach ein paar mal "exit" eingegeben -> Server tot und kann nicht rebootet werden -> Proxmox sagt Code 1 und Filedirectory nicht vorhanden. Das ist replezierbar! Noch...

Hallo, ich habe ein ziemlich komisches Problem... Wenn ich mich nach einem Tag auf das Proxmox Webinterface schalte, hängt das komplett und funktioniert nicht. Bei meinen laufenden VM's werden nur graue Fragezeichen angezeigt und auch sonst kann man nichts machen. Auch wenn ich auf...

I have a (possibly unrelated) problem where one cluster member's TOTEM keep generateing retransmits from other nodes or local timeouts. When I checked nodeC kept joining and leaving the cluster, about 50 per seconds. Restarting corosync resulted the same. It turned out however that on other...

Hello, I'm running the following configuration: ASUS Prime TRX40-PRO (BIOS Version 0702 2019/12/17 - latest available), Threadripper 3960x, 32 Gig ddr4, 1TB NVME, nVidia 1070ti. Last night I tried to install PVE 6.1-1 - as soon as I select install (or debug install with quiet disabled) - PVE...

Hi there, i am currently testing ZFS instead of my "old" setup (mdadm raid) and wanted to start the usual backup cycle. My Qemu-VMs will get backuped perfectly, my LXCs won't. Here is the log: Virtual Environment 6.1-3 Search Datacenter Server View Logs () INFO: starting new backup job...

Whenever I start my Proxmox Server it ask me to press F1 to Continue and F2 to delete Is there any way to stop this or am I doing anything wrong or the installation went wrong?? Everything is working fine but this is the issue I'm facing everyday when I start my Server. Currently I'm using...

My pc setup ===================================== host gpu: (nvidia 2070 super) guest gpu: (radeon rx 580) cpu: Ryzen 7 3700X ===================================== My config ===================================== args: -cpu host,hv_vendor_id=1234567890ab,kvm=off -machine type=kernel_irqchip=on...

We are currently setting up our servers. I recently checked the Syslog and see several hundred usernames, IP addresses and ports. Is this normal?

When creating a new container, if the "unprivileged" box is ticked, the container cannot be backed up. Restoring a container as "unprivileged" means that it won't start. Backing up VMs and "priviledged" containers works. Hlep ... PVE 5.4-6 Clustered. One node from two has this problem. Node...

Hi, I have one problem: One of my VM is still crashing. I dont know why. Cant be it caused by proxmox? VM starts normally and after some time it crashes. Maybe it is caused by update of VM "apt-get upgrade". But I restored backup before this crash and it appears still! ^^ thats what I can...

# ceph-volume simple scan stderr: lsblk: /var/lib/ceph/osd/ceph-2: not a block device stderr: Bad argument "/var/lib/ceph/osd/ceph-2", expected an absolute path in /dev/ or /sys or a unit name: Invalid argument Running...

Hello, I recently upgraded Proxmox from 5.3 to 6.0 and the process went very smoothly. So first of all I wanted to thank the team for making the upgrade so easy. However I may have discovered a bug tonight when rebooting my server to replace a failed disk in my ZFS pool. Upon coming back up...

So i know that most people still have "ethX". But i like the "Predictable Interface Names" and therefore use them. Only my "new" chelsio cc2-n320e-rs dual 10g sfp+ card doens't play nice for some reason? It gives me a "renameX" interface. with is not editable in the GUI and is "random"...