Search results

Solution: see here . To make the change persitent after installation of PVE you've to edit '/etc/default/grub' see here . Just for be sure you can perform an update-grub afterwards. Good luck! Greetinx moose

Hi folks, tonight I tried to install PVE 7.1 on an HP Microserver Gen10 (not +) machine (AMD Opteron X3421 4 x 2,1 GHz). I used an USB stick which I build from proxmox-ve_7.1-2.iso via dd. Sadly, the behavior of the installer on this machine is a little bit strange. On the other hand it works...

Hello @Dunuin, many thanks for your gorgeous support: extremly fast (despite to weekend), highly qualified and rich in detail! I think many comanies offering a payed 4th level platinum support can learn a lot from you ;) Thanks also for your additional hints related to partioning the SSD and...

Hi folks, I'm running a PVE server for several years now w/o any problems. Now the disk space for my LVM is running out and the HDDs are running for nearly 5 years now so I decided to replace them by bigger once and simultaneously switch to ZFS because of its advantages. Because I want to...

@Dunuin Many thanks for your reply and your suggestions!

Hi folks, so far I ran the current PVE release on my HP Proliant Microserver Gen10 (not +) X3421 on 2 HDDs configured as RAID1 managed by the boards onboard Marvell RAID controller. This works fine and relialbe for me over years now. Although the systems overall performs good (for my needs, im...

Hi folks, I can confirm that after having installed pve-kernel-5.15 HP on my MicroServer Gen 10 with AMD Opteron(tm) X3421 APU CPU the following problems don't occur anymore: the systems boots again the problems mentioned in this thread are also fixed For me installing pve-kernel-5.15 is the...

Hi folks, I can confirm that after having installed pve-kernel-5.15 HP on my MicroServer Gen 10 with AMD Opteron(tm) X3421 APU CPU the following problems don't occur anymore: reboot and shutdown are working now again my problems mentioned in this thread are fixed Greetinx moose

This is what it looks like at the moment. I myself used the workaround from @tauceti (thank you), i.e. downgraded to Kernel 5.13.19-1-pve removed Kernel 5.13.19-2-pve Having done so the systems boots again like expected.

Same problem on my AMD based system, a HP MicroServer Gen 10 with AMD Opteron(tm) X3421 APU CPU. My INTEL based Zotac ZBox with Intel Celeron CPU N3150 @ 1.60GHz CPU is not affected. I can confirm the problem occurs just after initializing the AMD GPU (better said, trying to do so ;-) )...

Well, I decided to choose method 1 (see above) because it's the more easy way. After trying some strings and formats in the 'API DATA' field I found the right syntax, see attached png-file. Having done so I was able to get my LE cert. Greetinx moose

Hi folks, I want to create and automatically renew a let's encrypt certificate for my PVE system. As read here I added a new Challenge Plugin (ACME DNS Plugin) because I want to use dns-01 challenge in conjunction with Hetzner's NS. As DNS API I choose "Hetzner" (see figure 1). But what's the...

No, sadly. Backups of others VMs to the same storage are running fine w/o any error. Only this one fails. Thanks for your reply, dietmar!

Hi folks, today I tried to backup one of my VMs with the PVE UI. I tried it several time, but the result is always the same: 2019-08-15 13:23:12 INFO: Starting Backup of VM 241 (qemu) 2019-08-15 13:23:12 INFO: status = running 2019-08-15 13:23:15 INFO: update VM 241: -lock backup 2019-08-15...

Hi folks, after some more reading and testing I've got what I've been looking for - a routing solution which allows using all IP addresses contained in a subnet. I'd like to share my solution - maybe anyone else will need it ;) First, I'll describe subnet routing (you know, you'll "lose" 3 ip...

First of all thanks for your reply, Alwin! I read this article too before writing my first post in this thread. One time, two times, three times and got confused more and more ... Well, I found this article confusing because the author mixes bridging (switching, Layer 2) and routing (Layer 3)...

Thanks a lot for your reply, guletz! Because I don't have a Mikrotik router I did it the way I menioned above, with https over ssh (tunnel) and allowing pveproxy listening on lo only. This works fine so far. There is only one issue: offical (custom) SSL certificates installed on PVE will...

Hi folks, a found a nice article in Hetzner's Wiki which describes how to use all (!) IP addresses of a given subnet for KVM VMs. I.e. not (x - 3) subnet addresses because no need of dedicated addresses for bc, gw (vmbrX) and net. What do you think of this solution described on Hetzner's...

Hi folks, just a questions about securing the PVE Web Interface. As far as I know two methodes are recommended by Proxmox itself: - 2FA - Fail2ban I myself would like to extend this two options a little bit by accessing port 8006 just over a tunneled ssh connection and to make it...