Hello
Lets say I have a primary backup server, and have pruning + GC configured on it.
Lets also say I have another server that exists only to sync from the primary and that I've enabled "Remove Vanished" - Do I still need to set up prune and gc jobs on the sync server?
Hello,
I've recently built out a new PVE8 cluster and set up ceph - I've noticed that on rebooting a node, it seems to generate a ceph crash file, and then fails to process it
2023-07-12T13:50:06.996554+01:00 pve1 ceph-crash[1904]: WARNING:ceph-crash:post...
Hi,
I have a 3 node pve cluster. I have an "opnsense" vm running on iscsi storage. I've noticed the following error getting spammed in syslog
2023-07-12T13:40:58.394754+01:00 pve1 qmeventd[1946]: unexpected cgroup entry 13:blkio:/qemu.slice
2023-07-12T13:40:58.395072+01:00 pve1...
Hey all
Previously my networking was as follows
vmbr0 attached to eth1 - vmbr0 used for management IP. Management vlan is untagged.
vmbr110 attached to eth1.110 - no ip on host
vmbr120 attached to eth1.120 - no ip on host
vmbr130 attached to eth1.130 - no ip on host
etc to use for guest...
It'd be nice to have something to highlight which backups are changing the most and consuming space in the datastore. I've seen a few forum posts that discuss this already and I understand the limitations of processing this on-demand.
Regardless of the deduplication, it'd be nice if there was...
Hello
I've set up a couple of new LXC containers recently, all using the same base OS and they have all been initialised with similar packages.
I noticed however that during the first backup of my most recent container - the output seemed to suggest that it had to back up all of it, and didnt...
Hello,
I have a backup schedule to take a backup every day at a certain time of all my VMs/CTs.
I am looking to have my backups keep the last two weeks of daily backups, but when I delete a VM/CT no new ones will be created - so in that instance I'd like for it to eventually cycle out and...
Hello,
Giving PBS a try and liking it so far - However one sticking point for me is the ability to download files from the backups.
This is possible for LXC containers via the PBS interface, however looking at VMs, I don't get the option. Looking at the PVE interface however, I notice that...
I have a few containers with custom mount points
Is it possible to include these in a backup job schedule? I don't want all of them though.
I was wondering if there's an equivalent of the ".pxarexclude" file, but for includes? (or is there a way i can pull in the mount point data and have it...
Hi
I unfortunately had a node in my cluster die (dead raid), so any pre-existing config is gone.
I used the same name, so before joining to the cluster i did pvecm rm <node>
I've reinstalled the node and re-added it to my cluster, but the Ceph page shows a phantom entry for the old node under...
Hello,
I've followed a guide (wont link because I dont want to be seen as advertising) that exposes an NVIDIA GPU to an unprivileged container.
Essentially, the following has been added to my LXC config
lxc.cgroup.devices.allow: c 195:* rwm
lxc.cgroup.devices.allow: c 508:* rwm...
Hi all
I have a keyboard and mouse attached to a USB switcher. The underlying devices are visible to my host so I pass them through to a VM and it all works fine
If I switch away from the host though, the USB devices detach and it seems QEMU instantly kills the VM.
I'm taking this as a QEMU...
Hi All
I've been playing around with GPU passthrough recently and whilst I've got it working - I only ever get anything displayed once the guest OS has booted and the driver has loaded. I dont see any of the boot sequence or even the EFI loading screen.
I've tried a different vbios for my card...
Hi all
just wondering if you have any plans at all for something like a standalone version of pveproxy that would allow you to manage multiple clusters from one web interface?
So for example, you build out cluster1 - any of those nodes can be used to manage that cluster no problem.
You the...
Hi guys
I've tonight attempted to upgrade one of my servers from Proxmox 4 to Proxmox 5 - I followed the guide on the wiki for upgrading and it all seemed to go well until I rebooted the box once done.
Trying to load the new kernel pve-kernel-4.15.17-3-pve I get what appear to be traces...
Hi all
I've just updated proxmox (I don't have the old version, but it was maybe 2 months or so)
current:
pve-manager/4.4-13/7ea56165 (running kernel: 4.4.44-1-pve)
A third party script (librenms proxmox poller) is now showing error below (This was working before the update/reboot)
Can't...
Hi Guys
My Proxmox is configured in that all my LXC containers have a .raw image which contains their filesystem in /var/lib/vz/images.
I was wondering if I can set specific mount options per container so that for example the container itself could have "noatime" set. I dont want this global...
Hi Guys
I noticed recently that my LXC containers have a new option called "Cores". I previously had an LXC container configured with a CPU limit of 1 on a 4 core box and the end result was that the workload was spread across all cores but each one was loaded at about 25% - This resulted in...
Hi Guys
I'm looking at making some scripts that give me stats of my containers but I'm having difficulty getting CPU usage for it via the API.
When looking at a container's status via the API, I suspect the "cpu" value should represent the percentage of CPU its using against its allocation...
Hi Guys
Recently discovered pvesh but having an issue with some of my nodes.
These work as expected and i get a list of nodes:
root@node2:~# pvesh get /nodes/node3/lxc
root@node2:~# pvesh get /nodes/node1/lxc
But these two fail and im not really sure what to do :)
root@node2:/~# pvesh get...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.