Search results

  1. U

    Update Installed -- System booted in EFI-mode but 'grub-efi-amd64' meta-package not installed!

    Good Morning, I installed an update in ProxMox today from the GUI and I got an error that I have not seen before. "System booted in EFI-mode but 'grub-efi-amd64' meta-package not installed!" I have installed many updates but I have never had this mentioned before. I have NOT rebooted the...
  2. U

    Proxmox goes unresponsive.

    HI All, I have a weird issue I've been chasing for sometime. I don't think it's strictly a Proxmox issue, but I'm not sure whats happening. I have a server I have colo'd in a datacenter. I had recently upgraded the server, and did a backup of a VM and restored it on the newly built server...
  3. U

    Clock Speed.

    Greetings, I have an Overclocked Intel i7-7700 running at 4.9ghz. In the proxmox shell, it shows the correct clock speed but on a VM it is only showing 4.2ghz. I've asked this question a few times, but I'm trying to understand why a VM doesn't report the actual clock speed and 2), does it matter?
  4. U

    Clock Speed / Turbo Boost Question

    Greetings, On the proxmox terminal, when I cat /proc/cpuinfo I see a clock mhz speed of 4340.648 but within a KVM host, I only see 3938.590 The CPU has a 4.4ghz Turboboost speed that it appears the KVM isn't accessing. Is there anyway to unlock that extra clock speed for the KVM to use?
  5. U

    CPU MHZ and Cache Different in VM than host.

    Hi Wosp, I appreciate your time answering. I tried Host, in addition to Haswell. No matter what I tried, I couldn't get the VM to utilize the CPU's full clock or cache. It made a huge difference in an app I was hosting that is single core, so missing the clock speed and cache was painful...
  6. U

    CPU MHZ and Cache Different in VM than host.

    If I create a CT instead of a VM, I get full use of the CPU Clock and Cache. I'd rather use VM though.
  7. U

    CPU MHZ and Cache Different in VM than host.

    All, I have a Intel i7-4790K. In the shell of the debian/proxmox cat /proc/cpuinfo shows it as being 4.4ghz and a cache size 8192 However, when I create a VM, and do cat /proc/cpuinfo from within the VM it is reporting mhz 3.9 and a cache of only 4096 Is there anyway to utilize the CPU's full...
  8. U

    Storage Setup Advice

    Ya. That is how I currently have it configured with ZFS. Would ZFS in Proxmox software RAID0 still beat a Mounted Drive/Directory setup with Proxmox?
  9. U

    Storage Setup Advice

    Hi Everyone. I am setting up a new server with Proxmox, and I was curious to what everyone's opinions are on achieving the best possible SSD performance in Proxmox. I do not need redundancy, as I will be copying important data onto a 1TB drive in the server for backups. In the server I have...
  10. U

    zfspool issue after hard-reboot

    All, I had to do a hard-reboot of the server, never good.. I know.. now when I try and start the virtual machines in Proxmox, I am getting this error "zpool import -d /dev/disk/by-id/ -a failed" Any ideas on how to fix?
  11. U

    [SOLVED] Hardware RAID 0 - Cant find disk

    I found the drive using lsblk cciss!c0d1 the c0d1 stands for controller 0, Disk 1. /dev/cciss/c0d1 gets me to the drive. Thanks!
  12. U

    [SOLVED] Hardware RAID 0 - Cant find disk

    Is there a way with gdisk to list drives? My other issue, is I can't find the drive. It was present in the GUI install of Promox, but when I go through /dev/ i can't seem to find the second logical drive.
  13. U

    [SOLVED] Hardware RAID 0 - Cant find disk

    I deployed Proxmox on an HP Server with a raid controller. When I installed Proxmox, it properly showed the Logical disks I had created in the RAID configurations. I selected the first logical disk for Proxmox to install on and I had another Logical disk consisting of 3x 300GB SAS drives...
  14. U

    [SOLVED] Use specific interface for outbound connections

    FIxed this. I setup Masquerade via one of the bridges and used that interface address as the gateway.
  15. U

    [SOLVED] Use specific interface for outbound connections

    Would i set the 192.168.1.2 address as the default GW?
  16. U

    [SOLVED] Use specific interface for outbound connections

    Good Morning. I hope there is a networking Guru browsing the forums this morning. I have an issue that I just can't resolve. I have a proxmox deployment with 2x physical NICs. NIC-1 eth0 (vmbr0) is attached to the internet and has been assigned a static address. NIC-2 eth1 (vmbr1) is...
  17. U

    Network External and Internal IP to CT

    I understand. I have 2 physical NICs. NIC1 (eth0), WAN/Internet working OK with External Internet address. NIC2 (eth1) is physically connected to a local switch where a few other servers sit. I want to configure the eth1 to access my local network on that NIC2, via local address (192.168.1.x)...
  18. U

    Network External and Internal IP to CT

    All, I have a Debian CT deployed in Proxmox. I have an external address assigned to eth0 (bridged) inside the CT. It connects to the internet, and I can SSH into the external address. I have eth1 connected to a local switch with other physical servers on an internal network. I want to also...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!