Search results for query: Intel 620

I'm not sure if there are any other tests I can do to look at the Nic configuration settings and confirm nothing is being sent from the hardware. Given the other issues reported with pass through, I suspect the problem maybe there. I'm not sure this is correct root@pve:~# dmesg | grep -e DMAR...

Greetings all! Any suggestions for our new server install? We just ordered two refurbed Dell 620 servers. Here's their stats: Dual Intel E5-2690 V2 3.0GHz 10-Core 256GB DDR3 ( 16x16GB 12800R ) Mini H310 Raid Controller (Flashed to HBA mode) iDRAC 7 Enterprise with license 10GB SPF+dual 1gigE...

Hello, my Server has following Hardware: 2x AMD EPYC 7301 Processor (2,20 GHz, 64 MB Cache, 16 Cores, 32 Threads) 64 GB DDR4-2666 RAM (4x DIMM 16 GB PC4-21300 ECC Reg.) SuperMicro H11DSi (on Board: VGA, 2x 1 Gbit-LAN (Intel i350-AM2), 1x M.2, 2x U.2, 10x S-ATA 6Gb/s; Remote Management (IPMI...

Hi, I am trying to make PCI Passthrough in Proxmox to OpnSense. Unfortunately I can't get it working. I already checked and posted in the OpnSense forums, but the settings in OpnSense should be fine. So I think the PCI Passthrough is causing the problems, or I want to exclude pci passthrough...

I've recently gotten a ThinkCentre m90n-IoT and I figured it would be fun to throw proxmox on it and use it as a portable lab / testbench device, one thing I really wanted to get working was GPU passthrough of the Intel UHD 620 so that way it could also be plugged into a monitor and used as a...

tks. I managed to get win10 running in a mini pc with intel 620 graphics with theses instructions. the blacklist of vfio.conf did the trick. Now im trying to run linux mint 20.04 as guest .. nothing .. until now

Upgrade to Proxmox VE 6.x which features the 5.4 kernel with a much more recent i40e driver. Also note you cannot compare the sourceforge version with the one from the kernel, they are just two different things.. Actually an Intel Engineer recommended us also away from that driver, which is...

Thanks for this information. Using the i444 machine the Intel card is recognized by Ubuntu. Great improvement ! But now, i'm facing other issues with i915 Intel drivers which look quite unstable. I've made al lot of tests (BIOS or UEFI, q35 or i440, Intel drivers or not, different Kernels) and...

...10: - Same situation - Windows 10: - With a standard GPU and the GPU passthrough, i see the 2 cards in Windows, install Intel drivers, Intel 620 recognized, no issue in the device manager - If i delete in the VM hardware the standard GPU, and leave the GPU passthrough alone, Windows do not...

Achievement: - GPU and audio passthrough working / Tested on Ubuntu and Win10 / Reproductible Still pending: - Win10: HDMI not activated (audio & GPU recognized, acceleration OK in Kodi) - Ubuntu: Acceleration not working (no issue on xorg, Intel drivers OK, DRI OK), graphic card unrecognized...

Thanks for this link. I will give it a try ! I'm not that much optimistic because i've made many tries and each of them fails in a different maner. Here is the results of my tests in order to have Kodi running: - VM with Ubuntu: GPU passthrough is "working more or less" / HDMI display works /...

Hello, I have a mini computer with an Intel i5-7200 CPU (with Intel HD 620 GPU,) that i use for vitualization. This computer is near of my TV and i would like to use it as a Kodi box, using LibreElec distribution (i know virtualization is not made for that but i try the challenge...). Intel VMX...

Unfortunately, my server configuration is not like yours. Supermicro X11DDW-NT BIOS 3.3 SATA controller: Intel Corporation Lewisburg SATA Controller [AHCI mode] (rev 09) RAIDZ 4 x Samsung SSD 860 PRO 4TB Firmware Version: RVM01B6Q write: IOPS=1143, BW=1143MiB/s (1199MB/s)(64.0GiB/57323msec)...

I have searched this forum and can't find where to set the noatime value. I have read changing out relatime to noatime will improve SSD speeds and lower wear. In older Proxmox versions, it was recommended to add all mounts in /etc/fstab and there specify noatime. When I open fstab, it is...

Thank you so much! It’s refreshing to get a response which is to the point without a bunch of what if’s and maybes.

I am using 3 different cards between my R710, 620 and R720 servers: 1) Built in card for Dell R620 ( C63DV 0C63DV DELL X520/I350 DAUGHTER CARD 10GBE NETWORK ) 2) Add in Intel card: Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter 3) Add in Mellanox card: Mellanox ConnectX-3 EN CX312A Dual...

Hello, I want to understand if I am reaching a bottleneck in my hyperconverged Proxmox+ Ceph cluster. In moments of high load (multiple LXC with high I/O on small files) I see one node with: - IO delay at 40% - around 50% CPU usage - load at 200 (40 total cores / 2 x Intel(R) Xeon CPU E5-2660...

I just bought a new server and install proxmox 5.2-10 but I have a lot of IO delay and don't know how to improve FSYNCS! Could you help please? Here are some informations, tell me if you need something else : Server info : Intel Xeon E3-1270v6 4c/8t - 3,8GHz /4,2GHz 64Go DDR4 ECC 2400 MHz...

Sorry, that's the config from member "loomes" and his VM is working now. This is my Hardware: Barebone Nano PC Intel Core i3-7100U mit 2x 2,4GHz / 3MB Cache (2 Cores / 4 Threads) 2x SODIMM DDR4 2133MHz Steckplätze für bis zu max 32GB Speicher Intel HD Graphics 620 mit HDMI 2.0, mini...