SSD Optimization: where to set noatime in Proxmox 6 VE?

[Rikard]

I have searched this forum and can't find where to set the noatime value. I have read changing out relatime to noatime will improve SSD speeds and lower wear. In older Proxmox versions, it was recommended to add all mounts in /etc/fstab and there specify noatime.
When I open fstab, it is completely empty. Where can I see and edit all mount specifications run during boot?

I'm having two boot drives in zfs raid1 (mirror). They are Intel 540S with latest firmware connected to the SM iPass SATA controller.

(I have left room for 20% overprovisioning and room for another future partition, if needed.)

Current mount info for rpool:

root@riliprox:~# mount
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=263469504k,nr_inodes=65867376,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=52699032k,mode=755)
rpool/ROOT/pve-1 on / type zfs (rw,relatime,xattr,noacl)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup2 on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=44074)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
sunrpc on /run/rpc_pipefs type rpc_pipefs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
rpool on /rpool type zfs (rw,noatime,xattr,noacl)
rpool/ROOT on /rpool/ROOT type zfs (rw,noatime,xattr,noacl)
rpool/data on /rpool/data type zfs (rw,noatime,xattr,noacl)
lxcfs on /var/lib/lxcfs type fuse.lxcfs (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other)
/dev/fuse on /etc/pve type fuse (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other)
tmpfs on /run/user/0 type tmpfs (rw,nosuid,nodev,relatime,size=52699028k,mode=700)

 

[Stoiko Ivanov]

With ZFS you set noatime (and other properties) with `zfs set` - see `man zfs`

OTOH:

rpool on /rpool type zfs (rw,noatime,xattr,noacl)

rpool/ROOT on /rpool/ROOT type zfs (rw,noatime,xattr,noacl)
rpool/data on /rpool/data type zfs (rw,noatime,xattr,noacl)

noatime seems set for the ZFS datasets?

 

[Rikard]

@Stoiko Ivanov thanks for your sharp eyes there!
I guess it's not possible to set noatime for non-zfs mounts?

A general question about noatime is if I can set it via zfs set storage datasets currently in use with heavy IO? The storage datasets are spinnders, ie. non-SSD drives.

 

[Stoiko Ivanov]

I guess it's not possible to set noatime for non-zfs mounts?

for other filesystems you can set that in '/etc/fstab' (as it used to be), however you don't seem to have any other filesystems where you would benefit from noatime