Latest activity
-
Ffortechitsolutions replied to the thread [PDM 1.1.7] Does Live Migration of a Guest between Clusters Require Shared Storage?.Thank you for this detailed reply Fabian, this is all very clear / sounds good. Can you comment on if these migrations are 'sparse file aware' (ie, if I move a VM or Container with a 250gig virtual disk allocated, which is only 10% full, and 90%...
-
Mmutex posted the thread Debian 13 LXC template: IPv4 DHCP + IPv6 SLAAC launches DHCPv6 and breaks backups in Proxmox VE: Networking and Firewall.With IPv4 set to DHCP and IPv6 set to SLAAC in Proxmox, my Debian 13 LXC containers have: iface eth0 inet dhcp iface eth0 inet6 auto in their config. The installed ifupdown2 3.0.0-1.3 reports “unsupported address method 'auto'”, but launches...
-
BBu66as reacted to Falk R.'s post in the thread Off Topic - Community Stand bei der Kielux with
Like.
Hi, ich bin beide Tage da. -
JJohannes S reacted to fabian's post in the thread [PDM 1.1.7] Does Live Migration of a Guest between Clusters Require Shared Storage? with Like.
PDM cross-cluster migrations work pretty similar to regular intra-cluster migrations, but there are some differences. intra-cluster: - SSH used as control channel, SSH or plain TCP used for data transfer - live migration of VMs possible, offline...
-
JJohannes S reacted to fabian's post in the thread Q: PDM LXC migration drama moving container from Prox9<>Prox8 sanity checking with Like.
this is normal - if you do not delete the source as part of the migration, it will be left in a locked state to prevent accidental starts (it's usually not desired to have two identical instances of the same guest running in two places)...
-
JJohannes S reacted to UdoB's post in the thread Setting vCPU over physical maximum, should not be fatal to start, just start with physical core count and pop a warning ! with Like.
Well, usually we are talking "clusters". And it is wishful thinking that all nodes are equal. In fact one advantage here is that the nodes may widely vary. That dialog would need to limit the number of assigned cores to those of the smallest...
-
JJohannes S reacted to Falk R.'s post in the thread Off Topic - Community Stand bei der Kielux with Like.
Hi, ich bin beide Tage da.
-
Hi everybody, we just installed PMG in Production and are customizing the daily/weekly Spamreport mails for the users. Therefore we copied the "/var/lib/pmg/templates/spamreport-verbose.tt" to "/var/lib/pmg/templates/spamreport-custom.tt" and... -
Falk R. replied to the thread Off Topic - Community Stand bei der Kielux.Hi, ich bin beide Tage da. -
Hht2630 replied to the thread After I executed the "multipath -a xxxxxx" command, an error occurred with local-lvm "no such logical volume pve/data (500)".Thank you, I have resolved it. "multipath -a" add the wwid is incorrect.
-
Ttschmidt replied to the thread Cloned VMs from template receive the same DHCP IP address.I have not experienced this. I wasn't even aware it was a thing. All my Linux boxes use the MAC. Granted they are all very similar (debian with dhcpcd) and run against the same dhcp (kea) this at least proves you should be able to get it working...
-
Aus gegebenen Anlass hole ich den Thread noch einmal raus. Dieses Jahr findet am 18. und 19.09. wieder die Kielux in Kiel statt. Wer vorbei kommen möchte ist herzlich eingeladen und falls jemand Lust verspürt mich zeitweise am Proxmox Community... -
Aalexandrescx reacted to chell's post in the thread Ceph error: /dev/pve/data_tmeta: after upgrade 20.2.1 to 20.2.2 with Like.
Thank you. That did the trick. I added this file to recreate the links on boot. /etc/tmpfiles.d/pve-links.conf # save to /etc/tmpfiles.d/pve-links.conf # Type Path Mode UID GID Age Argument L+ /dev/pve/data_tmeta -...
-
Aalexandrescx replied to the thread Ceph error: /dev/pve/data_tmeta: after upgrade 20.2.1 to 20.2.2.Mostly RGW. I'd like S3 alongside RBD. Same for NFS-Ganesha because I have non-Proxmox machines I'd like to serve exports to. The cephadm dashboard also covers those services, which saves me from juggling two partial views of the cluster. My...
-
Ttomservo replied to the thread ZFS Datapool Error - How to Access Data from Virtual Machine Disk from Proxmox?.Probably yes (depending on the filesystem inside, and how badly corrupted the data is). It would look something like mkdir /tmp/mnt mount /dev/zvol/DATAPOOL-2/vm-100-disk-0-part1 /tmp/mnt -o ro Don't use /mnt (It is likely that some storage...
-
Llonger replied to the thread Cloned VMs from template receive the same DHCP IP address.I think a workaround might be possible via pfSense, I just looked and found the option Ignore Client Identifiers: I have not test myself. just a thought
-
EExoGoose reacted to dsmteam's post in the thread VM restart on complete host failure taking several minutes with Like.
We use a SSD San for storage with iscsi so live migration is not an issue with promox (most of the time we didn't even see a ping loss and TCP sessions stay active). It is not as fast as ESX but does the job adequately. Reducing the fencedelay to...
-
aaron replied to the thread Cloned VMs from template receive the same DHCP IP address.Because on Linux, usually the machine ID is used to identify against the DHCP server. Windows usually takes the MAC address. Lookup how you can prepare a Debian based system (which Proxmox VE is) to be a template. You usually need to empty the... -
DDark26 replied to the thread [SOLVED] Error with file restore on pve with pbsbackup.On the windows drive, the deduplication have been activate. :eek: . I didn't manage the instance so i didn't know that. That's explain the problem with the linux module for ntfs that didn't handle it.:(
-
fiona replied to the thread timeout waiting for systemd.Hi, es ist empfohlen, in so einem Fall qm stop ID zu benutzen, statt direkt den Prozess zu killen, weil dann wird noch mehr cleanup gemacht. Was sagt systemctl status ID.scope im Fall wenn das Timeout auftritt? Für beide Kommandos die numerische...