Latest activity
-
Mmicneu replied to the thread ZFS zvol versehentlich gelöscht - Wiederherstellung möglich?.Ich denke, es ist am einfachsten und zugleich am sichersten, das Backup wiederherzustellen.
-
Mmicneu reacted to cwt's post in the thread ZFS zvol versehentlich gelöscht - Wiederherstellung möglich? with
Like.
Da bereits wieder 50GB auf den pool geschrieben wurden, stehen die Chancen mehr als schlecht. Mit Glück ist vielleicht noch ein Snapshot vorhanden. zfs list -t snapshot Aber ohne Backup der VM wird höchstwahrscheinlich nur Forensik bleiben, da... -
RolandK posted the thread building pve kernel fails with make[2]: *** [debian/rules:281: abicheck] Fehler 1 in Proxmox VE: Installation and configuration.i'm reproducably getting this error when trying to build pve kernel from git. i'd like to try to test a btrfs patch. does somebody know why this happens and how to resolve? i spent quite a wile to figure it out, but i get no clue what's the... -
Bbroth-itk posted the thread "Bulk suspend", timeout, yellow traffic cone in Proxmox VE: Installation and configuration.Dear all, when performing maintenance on my 30+ PVE servers, I use to "Bulk suspend" all VMs and then reboot the host. Almost every time during that suspend process, one or more VMs are reporting a timeout. This will cause the VM to stay locked...
-
guletz reacted to gmaoret's post in the thread [Feature Request] Web UI: Custom names, tags, or notes for virtual disks (ZFS, QCOW2, etc.) with Like.
Hello Proxmox Community, I would like to propose an enhancement for virtual disk management in Proxmox VE, aimed at improving infrastructure documentation directly from the Web UI. Currently, virtual disks are automatically named based on the... -
PPeko replied to the thread VM isolation into its own VLAN.Hello, thank you for your suggestions! I know it has been a long time since I have checked this post, but would my wifi router also need to support vlans? I read that even if the server side and switch ports are configured, unless the router...
-
Uuzumo replied to the thread [SOLVED] The RAM capacity is not displayed correctly in the VM's web UI.I'm sorry. The information provided was inaccurate because a translation was used. (I've also edited the original post.) If “balloon” is enabled, the correct RAM usage will be displayed regardless of whether “hugepage” is ON or OFF. If...
-
Uuzumo replied to the thread [SOLVED] The RAM capacity is not displayed correctly in the VM's web UI.You're right; enabling `balloon` did fix the display issue. Thank you. Even if someone were to explain it to me, I don’t think I could fully understand why `balloon` displays correctly when `hugepages: 1024` is not set—even if `balloon` is...
-
ManDal replied to the thread BackupPilot - Desktop Backup Client für Proxmox Backup Server.Die Beta 5 von BackupPilot ist ab sofort verfügbar und bringt weitere Verbesserungen, Anpassungen und Korrekturen mit sich. Ein besonderer Fokus lag diesmal auf der korrekten Flatpak-Generierung als Vorbereitung für eine spätere Veröffentlichung... -
Uuzumo posted the thread [SOLVED] The RAM capacity is not displayed correctly in the VM's web UI in Proxmox VE: Installation and configuration.I had the opportunity to test with hugepages: 1024 enabled, and I noticed that the RAM capacity displayed in the VM's web UI summary didn't match the actual capacity. Has this always been the case? proxmox-ve: 9.2.0 (running kernel: 7.0.2-6-pve)...
-
-
Ttidal5 replied to the thread PVE 9.2 RAM Ballooning Not Working Right.Thank you for the advice, I am new to PVE and this is my first deployment at home. It is much appreciated. I will look into the discard feature and also the Resource Mappings. I think I've ran into an issue where the PCIe GPU changes identifiers...
-
Ttidal5 replied to the thread PVE 9.2 RAM Ballooning Not Working Right.
-
-
Ttidal5 replied to the thread PVE 9.2 RAM Ballooning Not Working Right.Ah, thank you for pointing that out. I will turn it off and set fixed allotment. P.S. It seems like after 40 minutes uptime, time VM is now receiving the full 20GB (19GB) of RAM allocated to it. Which is strange. Thanks for the help!
-
Ttidal5 replied to the thread PVE 9.2 RAM Ballooning Not Working Right.
-
-
Jjrl_1644 reacted to whatishappening's post in the thread [SOLVED] Can't enable secure boot on windows VM, option greyed out with Like.
OK the solution is way easier than I thought. Just power down, delete EFI disk, recreate it with pre-enrolled keys checked, then boot the VM. Finally found this in the manual under "10.2.11. BIOS and UEF" section.
-
FFuriousRage replied to the thread [SOLVED] /var/ read-only.Did: smartctl -t short /dev/sda smartctl -t long /dev/sda smartctl -t conveyance /dev/sda smartctl -t select,123+345 /dev/sda smartctl -H /dev/sda === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result...
-
Ttidal5 posted the thread PVE 9.2 RAM Ballooning Not Working Right in Proxmox VE: Installation and configuration.I updated to 9.2 and now one of my VMs is only getting allocated the minimum RAM set in the balloon configuration (started at 3gb then moved the min to 10gb). I have 64GB of system memory to be allocated and I have the following setup: - LXC...
-
Vvirtualizerforlife posted the thread [BUG] TOTP window freezes sometimes when attempting to login and unable to click anything in Proxmox VE: Installation and configuration.Hi, I found possible bug that I would like to report here. Summary: When connecting to the local (hosted in the home network) instance of proxmox and entering login credentials everything is fine until this point. But when the login window is...
-
MMarkku reacted to berathram's post in the thread Upgrade incomplete with package conflicts with Like.
Oh my god, of course! These modernized debian list files got me confused... After adding the proper deb sources everything went well. You have my thanks!
-
Oh my god, of course! These modernized debian list files got me confused... After adding the proper deb sources everything went well. You have my thanks!
