Latest activity
-
shanreich reacted to fiona's post in the thread [TUTORIAL] Resolving recent package conflict when you have Steam installed on your host (you shouldn't :P) with
Like.
EDIT: seems like the i386 packages are now also present with the correct version in the standard Debian repository, so the workaround should not be necessary anymore. DISCLAIMER: Do this at your own risk! DISCLAIMER: I'm not writing this in my... -
OOsvaldoP reacted to Alwin's post in the thread [SOLVED] Cannot remove Snapshot ( VM is locked (snapshot-delete) ) with Like.
The snapshot entry is stored in the /etc/pve/qemu-server/<vmid>.conf file of your VM, you can delete the entry by hand.
-
LLordIcon replied to the thread Lenovo MiniPC - Proxmox stürzt ab?!.Leider sehe ich das nicht also ist so das nix mehr erreichbar ist. - Ja das ist da wo der steht leider nicht so einfach machbar^^
-
LLordIcon replied to the thread Lenovo MiniPC - Proxmox stürzt ab?!.da ist kein Bildschirm Dran ich starte dann halt einfach neu. - hier im Forum und bei Reddit kam halt dieser offload fix zusprache und dann soll das weggewesen sein
-
LLordIcon replied to the thread Lenovo MiniPC - Proxmox stürzt ab?!.Bitte entschuldige. Ja ich wusste nicht was ich da alles auflisten soll. - Glaube ja - bei meiner Netzwerkkarte steht nic0 (intel)
-
driley reacted to fiona's post in the thread [SOLVED] On a PVE system with the pve-qemu-kvm 11.0.0-1 package installed, virtual machines with the Hyper-V role added get stuck in a boot loop. with Like.
The reason is that your manual -cpu host argument will override the other one completely, and thus turn the cet flag(s) back on, so you have to disable them again. The following command gets the number of the relevant devices (replace 100 with... -
PProxGamingMox replied to the thread [SOLVED] Noteable I/O Delay after upgrade to 9.1.14.I have been at it since midnight, lots of restarts both on the host as well as the VMs, all 3 of them are on ZFS storage which could explain the discard race perhaps ? The host was left on overnight so about 7-8 hours and the delay was nailed at 7%.
-
fiona replied to the thread [SOLVED] On a PVE system with the pve-qemu-kvm 11.0.0-1 package installed, virtual machines with the Hyper-V role added get stuck in a boot loop..The reason is that your manual -cpu host argument will override the other one completely, and thus turn the cet flag(s) back on, so you have to disable them again. The following command gets the number of the relevant devices (replace 100 with... -
PProxGamingMox replied to the thread [SOLVED] Noteable I/O Delay after upgrade to 9.1.14.After turning Discard and IO thread off on all 3 vms the issue appears to have gone away ? IO Pressure Stall is also taking a nose dive.
-
-
Byou should use net0 for vm first interface, net1 for vm second interface ,.... (It's match net id from vm config) If you don't specify interface, it's apply to all interfaces.
-
PProxGamingMox replied to the thread [SOLVED] Noteable I/O Delay after upgrade to 9.1.14.Small update : After unchecking Discard and IO Thread from 2/3 VMs the IO Delay dropped to 3%. Could that be the culprit ?
-
Wwire2hire posted the thread lxc-pve_7.0.0-1_amd64.deb compromised? in Proxmox VE: Installation and configuration.i saw on reddit a thread with a upload to virustotal, for the packages , flags as linux trojan. https://www.reddit.com/r/Proxmox/comments/1tge2n9/lxcpve_7001_amd64deb_compromised/...
-
Fflorianlkm replied to the thread Issue installing PBS on Hyper-V "No device with valid ISO found".Yes, I tried in TUI mode, same issue. I'm going to try installing on top of Debian
-
PProxGamingMox replied to the thread [SOLVED] Noteable I/O Delay after upgrade to 9.1.14.Also worth noting that I am using kernel Linux 6.8.12-4-pve (2024-11-06T15:04Z) since my system kept freezing with anything pre 7.0.x kernel version, have not tried 7.0.x kernel version yet. Not sure if related.
-
PProxGamingMox posted the thread [SOLVED] Noteable I/O Delay after upgrade to 9.1.14 in Proxmox VE: Installation and configuration.Good morning everyone. As the title states, at midnight I did a full upgrade from version 9.0.11 over to 9.1.14 including all packages. Since then I have noticed that I have got a somewhat stable I/O Delay of 7% and is apparently caused from 3...
-
-
Mmeyergru replied to the thread Bester Weg für Fileserver (samba).Ich wollte nur meinen Gedankengang bei der Zielsetzung: "Wie bekomme ich es möglichst sicher hin, die auf einem PVE vorhandene physische Storage an VMs, LXCs und im meinem Heimnetz vorhandene Clients freizugeben?" beleuchten. Das entspricht exakt...
-
JJohannes S replied to the thread Bester Weg für Fileserver (samba).Wie soll das "roh" mit lxcs überhaupt gehen, dass das Problem auftritt? Wenn man die devices durchreicht, hat man doch keine write-Amplification (ich würde es trotzdem nicht tun, anderes Thema), irgendwie stehe ich da gerade auf der Leitung ;)...
-
LHallo liebe User, danke schon erstmal für die Zeit die Ihr euch nehmt um zu helfen! So ich habe einen MiniPC von Lenovo und da Proxmox in der neutsten version drauf. Dadrauf sind nur ein PiHole und HomeAssistant. ABER Irgendwas stimmt da nicht...
-
Tthomasnagel posted the thread Not opening web interface from Daily Spam Report in Proxmox Mail Gateway (Deutsch/German).I am using Proxmox Mailgateway 9.0.7 for testing right now. A few weeks ago I deplyed it with two Testdomains. Since today it seems I cannot access the webpage from the Daily Spam-Report-Mail. It loads and completes loading but it only shows the...
-
Mmeyergru replied to the thread Bester Weg für Fileserver (samba).Lies nochmal genau, Johannes. Nummer 1 meint "roh", also nicht die normalen Ressourcen. Das Problem mit der Write Amplification hat man nicht bei Variante 2a oder 2b. Nummer 1 sind die Varianten mit passthru, Nummer 2 mit logischem Zugriff...
