Latest activity
-
Mmr.hollywood replied to the thread [SOLVED] Intel NIC e1000e hardware unit hang.Just to update you guys. Ubuntu VM with an e1000e nic successfully ran IPerf3 for 10 hours at gigabit speeds with 0 retransmissions and no crashing. Windows 10 VM with a VirtIO nic has been running IPerf3 for 8 hours at gigabit speeds. No...
-
UFor anyone like me who's WebUI shows there is only one address assigned but the console still freezes periodically, try this which worked for me: SSH to the proxmox host Check if other interfaces have picked up IPv6 addresses from RA or DHCPv6...
-
Bberprinzess reacted to Bu66as's post in the thread Problem nach Festplattentausch mit Boot von PVE - fehlender Bootloader with
Like.
Hallo @berprinzess, der verlinkte Guide ist zwar gut, setzt aber ein laufendes System voraus, was bei @gerhau aktuell das Problem ist. Er müsste von einem Live-System (z.B. Proxmox-Installer im Debug-Modus) booten. Von dort aus kann er dann den... -
Cclared85 posted the thread Proxmox VE - issue with 10Gigabit eht card with intelX520 in Proxmox VE: Networking and Firewall.I at all, I try to use 10Gb card with my zimablade with proxmox VE installed. The card is equipped with intel X520. I can't see the interface with command "ip link"...instead in the output of "lspci -k" I can see this for X520 card: "...Ethernet...
-
Hhspindel replied to the thread Backup Proxmox PBS & PVE System Files! New script with advanced notification features!.For @Damianoo and anyone else reading: the latest fixes address all the issues. Thank you!
-
OI signed up just to say thank you @leesteken — Long way on linux here, but I was going crazy over this.
-
TThere needs to be 24 hours and 5 minutes between your prune and GC. Otherwise the GC won'T delete the chunks and they are still pending. So best you try the GC again tomorrow.
-
CCold_Cloud_1 reacted to M Prindle's post in the thread Subscription check behind proxy broken in PVE9 with Like.
I used the same workaround and can confirm that a dummy ipv4 record on each host allows the license to validate. Thanks for the info.
-
TI would run a full re-verify so every chunk gets checked again even if that snapshot got successfully verified before.
-
Ppeoriait-sr replied to the thread Dell OpenManage installation on Proxmox 9 with Debian 13.Hi, I was just able to get through the install after modifying the script here: https://jono-moss.github.io/post/dell-openanage-server-administrator-12-01-2024/ I'll have to go back and document exactly what I had to change, but I replaced some...
-
Ggwagner replied to the thread PBS fails to connect to Backblaze B2?.Funny enough, I was just trying this with an Amazon S3 with the same issue. Until I changed those settings in PBS S3 Endpoint. Didn't try it earlier because I figured it's Amazon S3 "I won't need to do that." Oh well.
-
Mmr82 replied to the thread No network after PCIe NVM disk plug.I signed up just to say thank you @leesteken — Long way on linux here, but I was going crazy over this.
-
JJohannes S reacted to BhSimon's post in the thread [SOLVED] Rename a Cluster (Not a Node) with Like.
Hi Heracleos. I can confirm that this works in PVE 9.0.10. This is the procedure I followed. Note, I am not using Ceph. Before: Backed up all VMs and containers in the cluster Shutdown all VMs and containers in the cluster Checked pvecm status...
-
OOnslow replied to the thread Proxmox does not start after attempted update from 7 to 8 to 9.Do I understand right, that you want to know which versions had particular packages in PVE 8? If so, here you are mine. This is up-to-date PVE 8.4.14.
-
JJohannes S reacted to tobyge's post in the thread [SOLVED] Linux packages auf Windows installieren with Like.
Servus, Hab alles geklärt, es funktioniert alles auf der VM, der Webserver rennt jetzt fehlerfrei und kann im lokalen Netz von meinen Notebook aus darauf zugreifen. Trozdem danke für eure Hilfe <3
-
JJohannes S reacted to damarges's post in the thread The Reasons for poor performance of Windows when the CPU type is host with Like.
Wrote a small shell script to detect proper cpu configuration: #!/usr/bin/env bash # cputest.sh — Detect x86-64 micro-arch levels (v2/v3/v4) and show a tidy summary. # Options: # --no-color disable ANSI colors # --full also print...
-
JJohannes S reacted to crally's post in the thread Server Upgrade - Unterstützung/Beratung bei Auswahl der Hardware with Like.
Ja die 7,8GBit/s werden komplett ausgenutzt. D.h. ein 10GB großes Modell ist in ca. 1,5 Sek. im VRAM. Da Ollama das Modell nach 5 Minuten Inaktivität jedoch wieder rauswirft, hat das den Effekt, dass beider ersten Anfrage die Antwort um die...
-
BBhSimon replied to the thread [SOLVED] Rename a Cluster (Not a Node).Hi Heracleos. I can confirm that this works in PVE 9.0.10. This is the procedure I followed. Note, I am not using Ceph. Before: Backed up all VMs and containers in the cluster Shutdown all VMs and containers in the cluster Checked pvecm status...
-
Sspencerh replied to the thread Import from ESXi Extremely Slow.So weirdly I re-copied my test VM and it seemed to get exactly the same throughput. It's got 2 disks; a 1GiB and a 50Gib disk. With the original version, the VM transfers in ~20 minutes, and with the modified importer I see the exact same...
-
FFrancois3362 replied to the thread [SOLVED] Network drops on boot.Sorry for my English. I also lose my motherboard's network card when I add a card to my small personal server. It seems to be off (no more LED), I think it's the same problem...