Latest activity
-
PPwrBank replied to the thread Import from ESXi Extremely Slow.@t.lamprecht @Max Carrara Is this a viable path to increasing the import speed? I'm not sure if there's been any public discussion of the limitations of the ESXi import tool.
-
OOnslow replied to the thread [SOLVED] Proxmox Audit logins?.Examples of creating and cloning a VM in my PVE server # journalctl | grep create Aug 08 23:08:20 pmx1 pvedaemon[3798182]: <root@pam> starting task UPID:pmx1:0002Fxxx:15AA4xxx:68966xxx:qmcreate:101:root@pam: Aug 08 23:08:21 pmx1...
-
MMarkusKo reacted to fenghuang_lx's post in the thread [SOLVED] Lost acess to Desktop GUIin proxmox with
Like.
Thanks that solve my problem -
OOnslow reacted to jecowo's post in the thread [SOLVED] Proxmox doesn’t reboot after Installation second nvme with lvm-thin with Like.
Solution was to remove all data from the second disk, make a new partition with fsdisk and make a lvmthin with the GUI.
-
Wwaltar replied to the thread Recommendations for Dell R7715 Hardware selection / controller question.Dell search some money for christmas party ...
-
-
BHi everyone, my current setup is: encrypted Proxmox 8 installation on Debian 12, one disk (raid1), everything is working OK Instead of upgrade to Proxmox 9 Im considering setup change: new setup: disk1 (hw raid1) - encrypted Proxmox 9 on...
-
Ffrantek replied to the thread Metro/Stretch cluster mit Proxmox als Alternative zu vSphere oder Nutanix.Ich dachte gesehen zu haben, dass in der v9 Snapshots möglich sind.
-
BBsteiner36 reacted to m_w's post in the thread Backups failing despite apparently good connection. with Like.
It definitely smells like an MTU/fragmentation issue... but I started with defaults (when the problem first occurred), set everything I could find over to 1280 (problem still there) and now I've set it all back to defaults. No real improvement...
-
BBsteiner36 replied to the thread Backups failing despite apparently good connection..Thank for your input. I had the same issue where my backups would start and just halt at 0 after the recent upgrade to 8.14.4. I have been running around trying to figure out why they just hang. I couldn't find any other reasons as to why my...
-
BBsteiner36 replied to the thread Backups hang reliably when jumbo frames enabled on PBS VM.I had the exact same setup and a recent update must have broke the MTU setting because I have had mine set to 9000 for a while and my backups had never failed before. I set mine to 1500 and they're working great. Thanks for posting your resolution.
-
BBsteiner36 reacted to sstillwell's post in the thread Backups hang reliably when jumbo frames enabled on PBS VM with Like.
For what it's worth, I've found the problem. It's Synology - specifically, if you're running their Virtual Machine Manager (and a VM on it), it installs and enables Open vSwitch, and while you can set MTU=9000 on the interfaces of the NAS, the...
-
Bblackline replied to the thread [SOLVED] Proxmox Audit logins?.Are there any audit logs for proxmox activity? Like VM creation and deletion via both API or UI.
-
Ffrantek posted the thread Probleme mit Thunderbolt-Netzwerk nach Upgrade auf v9 in Proxmox VE (Deutsch/German).Hallo, ich hab einen Cluster mit 3 Nodes und Ceph auf Basis von Minisorum MS-01 PCs. Für die Cluster und Ceph-Kommunikation habe ich auf den Thunderbolt-Ports einen Netzwerk-Ring. Das funktioniert seit gut einem Jahr mit der v8 problemlos. Heute...
-
Ddevaux reacted to readyspace's post in the thread Ceph Pool PGs Reduced to 32 by Autoscale Despite Setting 256 – Is This Normal? with Like.
Yes—this is expected with the PG autoscaler. With a mostly empty pool, Ceph starts low (often 32 PGs) and grows PGs as data increases unless you guide it with bulk, target_size_ratio/bytes, or a pg_num_min.
-
Ddevaux reacted to SteveITS's post in the thread Ceph Pool PGs Reduced to 32 by Autoscale Despite Setting 256 – Is This Normal? with Like.
Note too Ceph seems to honor a target ratio but not a target size, at least in my experience.
-
CCristian.Digisat replied to the thread Configure vlan on CHR in proxmox.Yes, In MiKrotik, I set vmbr0 to receive "internet" and vmbr1 to receive VLANs. In Proxmox, I configured the networks like this. auto vmbr0 iface vmbr0 inet static address 192.168.0.9/24 gateway 192.168.0.1 bridge-ports...
-
GGMBauer replied to the thread Netzwerk Probleme: Ist es die Fritzbox oder Proxmox.Okay. Die grundsätzlichen Antworten auf das Leben, das Universum, den Proxmox-NUC und den ganzen Rest: 1. Dass der NUC hin und wieder nicht mehr per Netzwerk erreichbar ist, liegt bei diesem Gerät mit an Sicherheit grenzender Wahrscheinlichkeit...
-
Ffenghuang_lx reacted to MarkusKo's post in the thread [SOLVED] Lost acess to Desktop GUIin proxmox with Like.
Most likely you used a external script to get rid of the subscription popup? You can try this, maybe it helps: https://forum.proxmox.com/threads/proxmox-ve-web-gui-is-a-blank-page.172804/post-806653
-
Ffenghuang_lx replied to the thread [SOLVED] Lost acess to Desktop GUIin proxmox.Thanks that solve my problem
-
KWe are pleased to announce the first stable release of Proxmox Mail Gateway 9.0 - immediately available for download! Twenty years after its first release, the new version of our email security solution is based on Debian 13.1 "Trixie", but...
