Please advise as I need to get production up and running again. Should I just revert back to the PVE 5.x version?
Had to R&R due to no backups and a hardware failure. Upgraded/installed PVE6.0.1 on EYPC 7551 but it's not loading the virtualization module and manually doesn't seem to cut it either.
It's enabled in bios and it was working find in 5.x I just don't want to reinstall/start over so I am trying to get clarification on if I found a software bug in PVE6.0.1
Try to load it myself
and of course the details
Had to R&R due to no backups and a hardware failure. Upgraded/installed PVE6.0.1 on EYPC 7551 but it's not loading the virtualization module and manually doesn't seem to cut it either.
Code:
# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 43 bits physical, 48 bits virtual
CPU(s): 64
On-line CPU(s) list: 0-63
Thread(s) per core: 2
Core(s) per socket: 32
Socket(s): 1
NUMA node(s): 4
Vendor ID: AuthenticAMD
CPU family: 23
Model: 1
Model name: AMD EPYC 7551P 32-Core Processor
Stepping: 2
CPU MHz: 2553.157
BogoMIPS: 3992.46
Virtualization: AMD-V
L1d cache: 32K
L1i cache: 64K
L2 cache: 512K
L3 cache: 8192K
NUMA node0 CPU(s): 0,4,8,12,16,20,24,28,32,36,40,44,48,52,56,60
NUMA node1 CPU(s): 1,5,9,13,17,21,25,29,33,37,41,45,49,53,57,61
NUMA node2 CPU(s): 2,6,10,14,18,22,26,30,34,38,42,46,50,54,58,62
NUMA node3 CPU(s): 3,7,11,15,19,23,27,31,35,39,43,47,51,55,59,63
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid amd_dcm aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb hw_pstate sme ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 xsaves clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smcaIt's enabled in bios and it was working find in 5.x I just don't want to reinstall/start over so I am trying to get clarification on if I found a software bug in PVE6.0.1
Code:
root@C14G-H1-PVE:~# lsmod | grep kvm
root@C14G-H1-PVE:~# lsmod | grep -i kvm
root@C14G-H1-PVE:~#Try to load it myself
Code:
root@C14G-H1-PVE:~# modprobe kvm_amd
modprobe: ERROR: ../libkmod/libkmod.c:586 kmod_search_moddep() could not open moddep file '/lib/modules/4.15.18-18-pve/modules.dep.bin'
modprobe: FATAL: Module kvm_amd not found in directory /lib/modules/4.15.18-18-pve
root@C14G-H1-PVE:~# modprobe kvm
modprobe: ERROR: ../libkmod/libkmod.c:586 kmod_search_moddep() could not open moddep file '/lib/modules/4.15.18-18-pve/modules.dep.bin'
modprobe: FATAL: Module kvm not found in directory /lib/modules/4.15.18-18-pveand of course the details
Code:
root@C14G-H1-PVE:~# apt update
Hit:1 http://ftp.us.debian.org/debian buster InRelease
Get:2 http://ftp.us.debian.org/debian buster-updates InRelease [49.3 kB]
Hit:3 http://security.debian.org buster/updates InRelease
Hit:4 http://download.proxmox.com/debian/ceph-nautilus buster InRelease
Hit:5 https://enterprise.proxmox.com/debian/pve buster InRelease
Fetched 49.3 kB in 1s (61.1 kB/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
All packages are up to date.
root@C14G-H1-PVE:~# apt upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@C14G-H1-PVE:~# uname -a
Linux C14G-H1-PVE 4.15.18-18-pve #1 SMP PVE 4.15.18-44 (Wed, 03 Jul 2019 11:19:13 +0200) x86_64 GNU/Linux
