Proxmox V 4.2 Installation problem.

[Hiren Changela]

Hello,
We have to Download proxmox V 4.2 and create a Bootable Disk and Pendrive but when we insert on my Hardware Pendrive not Deteceted but Disk Detected and start a process After the(Loading proxmox Installer..)and Loading Ramdisk check process..) not complete But suddenly My hardware reboot automatically.

So Guys Can you Guide me which type of problem we have to face.

 

[manu]

Hi Hiren
Can you maybe post a picture or even better a video of the failed booting sequence ( imur, youtube ) ...

 

[Hiren Changela]

Hi Manu
Thanx Manu For your reply now share with you a Installation Picture.

 

[manu]

Hi
Does Debian 8.0 install successfully on this computer ? If yes you can install it and intall Proxmox on top if it following
this guide

https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Jessie

 

[Hiren Changela]

HI
Can you explain why Debian is install in our system.
Now Share With you a Two Videos in this video We have to show which type of problem We face.

Video 1:- https://drive.google.com/open?id=0BwLAmNTUCHEHRmRySkxfUnNWV00
Video 2:- https://drive.google.com/open?id=0BwLAmNTUCHEHNS0wV3lVX3lPRXM

 

[tom]

your keyboard is not working? use another one and/or connect this one to another usb port.

 

[Hiren Changela]

Also check another but is not working.

 

[Hiren Changela]

Hello Tom,
Now which step we have to taken.

 

[manu]

Hi Hiren:
* make sure your keyboard is working ( try to go in bios options )
* download this CD, burn it / put it on a USB stick, and try to start your computer from it

 

[Hiren Changela]

Thanx for a reply
But we Don't have Computer We have Dell Power EDGE 1425 Server.
Also No any Data or Os In server Now is totally Blank.So Which step We have to taken.

 

[wosp]

You mean Dell PowerEdge SC1425? I think I have one of these in my storage. Will try to launch PVE 4.2 install today, to see if it's related to SC1425.

 

[Hiren Changela]

Dell Power Edge Sc1425 Sever

We try to 4.1,4.2 and 3.6 But no one is install in our system and also Same issue on all of the Server Installing.

*************Installation process****
Video 1:- https://drive.google.com/open?id=0BwLAmNTUCHEHRmRySkxfUnNWV00
Video 2:- https://drive.google.com/open?id=0BwLAmNTUCHEHNS0wV3lVX3lPRXM

 

[wosp]

Okay, thanks. I've found my SC1425. I'm going to try for you.

 

[wosp]

Works like it should be here. I can use my keyboard (1.JPG) and start install without a problem (2.JPG).
Only difference is I've used the back-USB ports and you the front-USB. Should make no difference, but to be sure you can check if you also have problems with back-USB.

How are your BIOS settings:

- USB Controller (3.JPG)
- USB Flash Drive Emulation Type (4.JPG)

If these settings are the same as mine and back-USB still gives the problem, it can only be a local hardware problem at your side.