Packages kept back on upgrade to 6.0 with glusterfs official repo

pve-qemu-kvm 4.0.0-5 (available in pvetest) has adapted dependencies that should cope with the broken upstream packaging. you might need to do a "apt install --reinstall glusterfs-client glusterfs-common" or "apt install --reinstall glusterfs-client glusterfs-common glusterfs-server" (depending on your use-case) to switch to the the upstream repo version:
Code: 
# apt install --reinstall glusterfs-client glusterfs-common
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following package was automatically installed and is no longer required:
  python3-jwt
Use 'sudo apt autoremove' to remove it.
The following packages will be REMOVED:
  libgfapi0 libgfchangelog0 libgfdb0 libgfrpc0 libgfxdr0 libglusterfs-dev libglusterfs0
The following packages will be upgraded:
  glusterfs-client glusterfs-common
2 upgraded, 0 newly installed, 7 to remove and 0 not upgraded.
Need to get 8,434 kB of archives.
After this operation, 15.4 MB disk space will be freed.
Do you want to continue? [Y/n]
no other packages should be removed except for the libgf* and libglusterfs* packages! if any other output is shown with the above command, please enter 'n' to abort the upgrade and post the output here.
 
Apollon77 said:
@malevolent 3.x is EOL ... same as 4.0 ...
Click to expand...
Yes, I know. But I have a lot of high performance gluster on too many clients and none of them will upgrade until newer version will be as fast and stable as 3.12.15. Several of them are hospitals where the mantra is "Better the devil you know than the devil you don't know yet", and to be honest, versions 4 and 5 of gluster were full of bugs, memory leaks and low performance. I'd readed latest versions (5.8 and 6.4) had corrected those problems, but now proxmox seems to be stuck at 5.5
 
Last edited:
fabian said:
pve-qemu-kvm 4.0.0-5 (available in pvetest) has adapted dependencies that should cope with the broken upstream packaging. you might need to do a "apt install --reinstall glusterfs-client glusterfs-common" or "apt install --reinstall glusterfs-client glusterfs-common glusterfs-server" (depending on your use-case) to switch to the the upstream repo version:
Click to expand...
Oh, trying at once!
 
Code: 
{root@pve03:~}$ apt list --upgradable
Listing... Done
glusterfs-client/unknown 5.8-1 amd64 [upgradable from: 5.5-3]
glusterfs-common/unknown 5.8-1 amd64 [upgradable from: 5.5-3]
glusterfs-server/unknown 5.8-1 amd64 [upgradable from: 5.5-3]
{root@pve03:~}$ apt install --reinstall glusterfs-client glusterfs-common
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  bridge-utils ceph-common ceph-fuse cifs-utils corosync criu cstream dconf-gsettings-backend dconf-service dmeventd dtach ebtables
  faketime fontconfig fontconfig-config fonts-dejavu-core fonts-font-awesome fonts-glyphicons-halflings gdisk genisoimage glib-networking
  glib-networking-common glib-networking-services gsettings-desktop-schemas gstreamer1.0-libav gstreamer1.0-plugins-base
  gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly gstreamer1.0-x i965-va-driver ifenslave intel-media-va-driver ipset
  javascript-common liba52-0.7.4 libaa1 libaacs0 libacl1-dev libanyevent-http-perl libanyevent-perl libaom0 libappconfig-perl
  libapt-pkg-perl libarchive13 libasound2 libasound2-data libass9 libasync-interrupt-perl libasyncns0 libattr1-dev libauthen-pam-perl
  libavc1394-0 libavcodec58 libavfilter7 libavformat58 libavutil56 libbabeltrace1 libbdplus0 libbluray2 libboost-program-options1.67.0
  libbs2b0 libc-dev-bin libc6-dev libcaca0 libcairo-gobject2 libcairo2 libcdio18 libcdparanoia0 libcfg7 libchromaprint1 libclone-perl
  libcmap4 libcodec2-0.8.1 libcorosync-common4 libcpg4 libcroco3 libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl
  libcrypt-openssl-rsa-perl libcrystalhd3 libdatrie1 libdbi1 libdconf1 libdevel-cycle-perl libdevmapper-event1.02.1
  libdigest-bubblebabble-perl libdrm-amdgpu1 libdrm-common libdrm-intel1 libdrm-nouveau2 libdrm-radeon1 libdrm2 libdv4 libdvdnav4
  libdvdread4 libdw1 libev-perl libfaketime libfftw3-double3 libfile-chdir-perl libfile-readbackwards-perl libfilesys-df-perl libflac8
  libflite1 libfontconfig1 libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-bin libgdk-pixbuf2.0-common libgl1 libgl1-mesa-dri libglapi-mesa
  libglib2.0-0 libglib2.0-data libglvnd0 libglx-mesa0 libglx0 libgme0 libgnutlsxx28 libgomp1 libgoogle-perftools4 libgraphite2-3 libgsm1
  libgstreamer-plugins-base1.0-0 libgstreamer1.0-0 libguard-perl libgudev-1.0-0 libharfbuzz0b libice6 libiec61883-0 libigdgmm5
  libio-multiplex-perl libio-stringy-perl libipset11 libiscsi7 libjack-jackd2-0 libjbig0 libjemalloc2 libjpeg62-turbo libjs-bootstrap
  libjs-extjs libjs-jquery libjs-sphinxdoc libjs-underscore libknet1 liblilv-0-0 liblinux-inotify2-perl libllvm7 liblvm2cmd2.03
  libmime-base32-perl libmp3lame0 libmpeg2-4 libmpg123-0 libmysofa0 libnet-dbus-perl libnet-dns-perl libnet-dns-sec-perl libnet-ip-perl
  libnet1 libnetfilter-log1 libnorm1 libnuma1 libogg0 libopencore-amrnb0 libopencore-amrwb0 libopenjp2-7 libopenmpt0 libopus0
  liborc-0.4-0 libpango-1.0-0 libpangocairo-1.0-0 libpangoft2-1.0-0 libpciaccess0 libpgm-5.2-0 libpixman-1-0 libpostproc55 libprotobuf17
  libproxy1v5 libpulse0 libpve-access-control libpve-apiclient-perl libpve-common-perl libpve-guest-common-perl libpve-http-server-perl
  libpve-storage-perl libpve-u2f-server-perl libqb0 libquorum5 librados2-perl libradosstriper1 libraw1394-11 librbd1 librrd8 librrds-perl
  librsvg2-2 librsvg2-common librubberband2 libsamplerate0 libsdl1.2debian libsensors-config libsensors5 libserd-0-0 libshine3 libshout3
  libsidplay1v5 libsm6 libsmbclient libsnappy1v5 libsndfile1 libsodium23 libsord-0-0 libsoup2.4-1 libsoxr0 libspeex1 libspice-server1
  libsratom-0-0 libssh-gcrypt-4 libstatgrab10 libstring-shellquote-perl libswresample3 libswscale5 libtag1v5 libtag1v5-vanilla
  libtcmalloc-minimal4 libtemplate-perl libthai-data libthai0 libtheora0 libtie-ixhash-perl libtiff5 libtwolame0 libu2f-server0
  libunwind8 libusbredirparser1 libuuid-perl libv4l-0 libv4lconvert0 libva-drm2 libva-x11-2 libva2 libvdpau-va-gl1 libvdpau1
  libvidstab1.1 libvisual-0.4-0 libvorbis0a libvorbisenc2 libvorbisfile3 libvotequorum8 libvpx5 libwavpack1 libwebp6 libwebpmux3
  libx11-xcb1 libx264-155 libx265-165 libxcb-dri2-0 libxcb-dri3-0 libxcb-glx0 libxcb-present0 libxcb-render0 libxcb-shm0 libxcb-sync1
  libxcb-xfixes0 libxdamage1 libxfixes3 libxi6 libxml-libxml-perl libxml-twig-perl libxml-xpathengine-perl libxrender1 libxshmfence1
  libxslt1.1 libxtst6 libxv1 libxvidcore4 libxxf86vm1 libzmq5 libzvbi-common libzvbi0 linux-libc-dev lvm2 lxc-pve lxcfs lzop manpages-dev
  mesa-va-drivers mesa-vdpau-drivers net-tools novnc-pve numactl proxmox-mini-journalreader proxmox-widget-toolkit pve-cluster
  pve-container pve-docs pve-edk2-firmware pve-firewall pve-ha-manager pve-i18n pve-kernel-helper pve-xtermjs python-asn1crypto
  python-cephfs python-certifi python-cffi-backend python-chardet python-configparser python-cryptography python-enum34 python-future
  python-idna python-ipaddr python-ipaddress python-openssl python-pkg-resources python-prettytable python-protobuf python-rados
  python-rbd python-requests python-urllib3 python3-jwt rrdcached rsync shared-mime-info smartmontools smbclient socat sqlite3
  thin-provisioning-tools uidmap va-driver-all vdpau-driver-all vncterm x11-common xdg-user-dirs xsltproc
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
  glusterfs-server
The following packages will be REMOVED:
  libgfapi0 libgfchangelog0 libgfdb0 libgfrpc0 libgfxdr0 libglusterfs-dev libglusterfs0 proxmox-ve pve-manager pve-qemu-kvm qemu-server
  spiceterm
The following packages will be upgraded:
  glusterfs-client glusterfs-common glusterfs-server
3 upgraded, 0 newly installed, 12 to remove and 0 not upgraded.
Need to get 11.2 MB of archives.
After this operation, 74.4 MB disk space will be freed.
Do you want to continue? [Y/n] n
Abort.
 
do you have pve-qemu-kvm 4.0.0-5 installed?
 
Code: 
root@prox4:~# apt-get update
Atteint :1 http://ftp.fr.debian.org/debian buster InRelease
Atteint :2 http://ftp.fr.debian.org/debian buster-updates InRelease
Atteint :3 http://download.proxmox.com/debian/ceph-luminous stretch InRelease
Atteint :5 http://download.proxmox.com/debian/pve buster InRelease
Atteint :4 http://security-cdn.debian.org/debian-security buster/updates InRelease
Atteint :6 https://download.nfs-ganesha.org/2.8/2.8.0/Debian/buster/amd64/apt buster InRelease
Atteint :7 https://download.gluster.org/pub/gluster/glusterfs/6/LATEST/Debian/buster/amd64/apt buster InRelease
Réception de :8 http://download.proxmox.com/debian/pve buster/pvetest amd64 Packages [69,6 kB]
69,6 ko réceptionnés en 3s (25,2 ko/s)
Lecture des listes de paquets... Fait
root@prox4:~# apt-get dist-upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  libfdt1 libjemalloc1
Veuillez utiliser « apt autoremove » pour les supprimer.
Les paquets suivants seront ENLEVÉS :
  pve-libspice-server1
Les NOUVEAUX paquets suivants seront installés :
  dconf-gsettings-backend dconf-service glib-networking glib-networking-common glib-networking-services gsettings-desktop-schemas gstreamer1.0-libav gstreamer1.0-plugins-base
  gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly gstreamer1.0-x i965-va-driver intel-media-va-driver liba52-0.7.4 libaa1 libaacs0 libaom0 libass9 libavc1394-0 libavcodec58 libavfilter7
  libavformat58 libavutil56 libbdplus0 libbluray2 libbs2b0 libcairo-gobject2 libcdio18 libcdparanoia0 libchromaprint1 libcodec2-0.8.1 libcroco3 libcrystalhd3 libdconf1 libdrm-amdgpu1
  libdrm-common libdrm-intel1 libdrm-nouveau2 libdrm-radeon1 libdrm2 libdv4 libdvdnav4 libdvdread4 libfftw3-double3 libflite1 libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-bin libgdk-pixbuf2.0-common
  libgl1 libgl1-mesa-dri libglapi-mesa libglvnd0 libglx-mesa0 libglx0 libgme0 libgomp1 libgsm1 libgstreamer-plugins-base1.0-0 libgstreamer1.0-0 libgudev-1.0-0 libiec61883-0 libigdgmm5
  libjack-jackd2-0 libjbig0 libjemalloc2 liblilv-0-0 libllvm7 libmp3lame0 libmpeg2-4 libmpg123-0 libmysofa0 libnorm1 libopencore-amrnb0 libopencore-amrwb0 libopenjp2-7 libopenmpt0
  liborc-0.4-0 libpciaccess0 libpgm-5.2-0 libpostproc55 libproxy1v5 libraw1394-11 librsvg2-2 librsvg2-common librubberband2 libsamplerate0 libserd-0-0 libshine3 libshout3 libsidplay1v5
  libsodium23 libsord-0-0 libsoup2.4-1 libsoxr0 libspeex1 libspice-server1 libsratom-0-0 libssh-gcrypt-4 libswresample3 libswscale5 libtag1v5 libtag1v5-vanilla libtheora0 libtiff5 libtwolame0
  libv4l-0 libv4lconvert0 libva-drm2 libva-x11-2 libva2 libvdpau-va-gl1 libvdpau1 libvidstab1.1 libvisual-0.4-0 libvorbisfile3 libvpx5 libwavpack1 libwebp6 libwebpmux3 libx264-155 libx265-165
  libxcb-dri2-0 libxcb-dri3-0 libxcb-glx0 libxcb-present0 libxcb-sync1 libxcb-xfixes0 libxdamage1 libxfixes3 libxshmfence1 libxv1 libxvidcore4 libxxf86vm1 libzmq5 libzvbi-common libzvbi0
  mesa-va-drivers mesa-vdpau-drivers pve-kernel-5.0.18-1-pve va-driver-all vdpau-driver-all
Les paquets suivants seront mis à jour :
  libknet1 libpve-common-perl libpve-storage-perl lxc-pve pve-container pve-firewall pve-kernel-5.0 pve-kernel-helper pve-manager pve-qemu-kvm qemu-server spiceterm
12 mis à jour, 141 nouvellement installés, 1 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 144 Mo dans les archives.
Après cette opération, 674 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] n

I know there is a kernel upgrade in the list, but 674 Mo seems a lot for me !!!

Without the pve test for comparaison:

Code: 
root@prox4:~# apt-get update
Atteint :1 http://ftp.fr.debian.org/debian buster InRelease
Atteint :3 http://ftp.fr.debian.org/debian buster-updates InRelease
Réception de :2 http://security-cdn.debian.org/debian-security buster/updates InRelease [39,1 kB]
Atteint :4 http://download.proxmox.com/debian/ceph-luminous stretch InRelease
Atteint :5 http://download.proxmox.com/debian/pve buster InRelease
Atteint :6 https://download.gluster.org/pub/gluster/glusterfs/6/LATEST/Debian/buster/amd64/apt buster InRelease
Atteint :7 https://download.nfs-ganesha.org/2.8/2.8.0/Debian/buster/amd64/apt buster InRelease
Réception de :8 http://download.proxmox.com/debian/pve buster/pve-no-subscription amd64 Packages [65,7 kB]
105 ko réceptionnés en 3s (36,6 ko/s)
Lecture des listes de paquets... Fait
root@prox4:~# apt-get dist-upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
Les NOUVEAUX paquets suivants seront installés :
  pve-kernel-5.0.18-1-pve
Les paquets suivants ont été conservés :
  pve-qemu-kvm qemu-server spiceterm
Les paquets suivants seront mis à jour :
  libpve-common-perl libpve-storage-perl pve-container pve-firewall pve-kernel-5.0 pve-kernel-helper pve-manager
7 mis à jour, 1 nouvellement installés, 0 à enlever et 3 non mis à jour.
Il est nécessaire de prendre 56,6 Mo dans les archives.
Après cette opération, 267 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n]
 
@Dark26: your repository configuration must be broken somehow - in the second output packages are held back even though you are dist-upgrading..
 
fabian said:
do you have pve-qemu-kvm 4.0.0-5 installed?
Click to expand...
My bad, forgot to upgrade pve-qemu-kvm.
After upgrading from pvetest no problems upgrading... well, you need to specify you want to upgrade as well gluserfs-server if you have it installed, of course.

EDITED: even adding glusterfs-server, installation fails if you had glusterfs-server installed as libgfchangelog0 is both in glusterfs-common and glustefs-server, so I had to remove glusterfs-server and installing it after the upgrade.

Thanks!
 
Last edited:
malevolent said:
My bad, forgot to upgrade pve-qemu-kvm.
After upgrading from pvetest no problems upgrading... well, you need to specify you want to upgrade as well gluserfs-server if you have it installed, of course.

EDITED: even adding glusterfs-server, installation fails if you had glusterfs-server installed as libgfchangelog0 is both in glusterfs-common and glustefs-server, so I had to remove glusterfs-server and installing it after the upgrade.

Thanks!
Click to expand...

that sounds like a bug outside of our control - feel free to add it to the upstream issue: https://github.com/gluster/glusterfs-debian/issues/32 or report in Debian, depending on where the problem actually is.
 
fabian said:
@Dark26: your repository configuration must be broken somehow - in the second output packages are held back even though you are dist-upgrading..
Click to expand...

Actually it's broken because of the problem of glusterfs.

the packages pve-qemu-kvm qemu-server spiceterm failed the dependency.

Code: 
root@prox4:~# apt list --upgradable
En train de lister... Fait
libpve-common-perl/stable 6.0-3 all [pouvant être mis à jour depuis : 6.0-2]
libpve-storage-perl/stable 6.0-6 all [pouvant être mis à jour depuis : 6.0-5]
pve-container/stable 3.0-5 all [pouvant être mis à jour depuis : 3.0-4]
pve-firewall/stable 4.0-6 amd64 [pouvant être mis à jour depuis : 4.0-5]
pve-kernel-5.0/stable 6.0-6 all [pouvant être mis à jour depuis : 6.0-5]
pve-kernel-helper/stable 6.0-6 all [pouvant être mis à jour depuis : 6.0-5]
pve-manager/stable 6.0-5 amd64 [pouvant être mis à jour depuis : 6.0-4]
pve-qemu-kvm/stable 4.0.0-3 amd64 [pouvant être mis à jour depuis : 3.0.1-4]
qemu-server/stable 6.0-7 amd64 [pouvant être mis à jour depuis : 5.0-54]
spiceterm/stable 3.1-1 amd64 [pouvant être mis à jour depuis : 3.0-5]
root@prox4:~# apt-get install ^C
root@prox4:~# apt-get install pve-qemu-kvm
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Certains paquets ne peuvent être installés. Ceci peut signifier
que vous avez demandé l'impossible, ou bien, si vous utilisez
la distribution unstable, que certains paquets n'ont pas encore
été créés ou ne sont pas sortis d'Incoming.
L'information suivante devrait vous aider à résoudre la situation :

Les paquets suivants contiennent des dépendances non satisfaites :
 pve-qemu-kvm : Dépend: libspice-server1 (>= 0.14.0~)
                Dépend: libgfapi0 mais ne sera pas installé
                Dépend: libgfrpc0 mais ne sera pas installé
                Dépend: libgfxdr0 mais ne sera pas installé
                Dépend: libglusterfs0 mais ne sera pas installé
E: Impossible de corriger les problèmes, des paquets défectueux sont en mode « garder en l'état ».

Thee the problem is libglusterfs0

With the new repository maybe it's work but 600 mo it's a lot ! There is a lots of librairy that i don't think are necesseray... (
mesa-va-drivers mesa-vdpau-drivers va-driver-all vdpau-driver-all for exemple ... )

Qemu dependacy?

it's libspice-server1 which had a lot of dependency.

Code: 
root@prox4:~# apt-get install libspice-server1
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  libfdt1 libjemalloc1
Veuillez utiliser « apt autoremove » pour les supprimer.
Les paquets supplémentaires suivants seront installés :
  dconf-gsettings-backend dconf-service glib-networking glib-networking-common glib-networking-services gsettings-desktop-schemas gstreamer1.0-libav gstreamer1.0-plugins-base
  gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly gstreamer1.0-x i965-va-driver intel-media-va-driver liba52-0.7.4 libaa1 libaacs0 libaom0 libass9 libavc1394-0 libavcodec58 libavfilter7
  libavformat58 libavutil56 libbdplus0 libbluray2 libbs2b0 libcairo-gobject2 libcdio18 libcdparanoia0 libchromaprint1 libcodec2-0.8.1 libcroco3 libcrystalhd3 libdconf1 libdrm-amdgpu1
  libdrm-common libdrm-intel1 libdrm-nouveau2 libdrm-radeon1 libdrm2 libdv4 libdvdnav4 libdvdread4 libfftw3-double3 libflite1 libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-bin libgdk-pixbuf2.0-common
  libgl1 libgl1-mesa-dri libglapi-mesa libglvnd0 libglx-mesa0 libglx0 libgme0 libgomp1 libgsm1 libgstreamer-plugins-base1.0-0 libgstreamer1.0-0 libgudev-1.0-0 libiec61883-0 libigdgmm5
  libjack-jackd2-0 libjbig0 libjemalloc2 liblilv-0-0 libllvm7 libmp3lame0 libmpeg2-4 libmpg123-0 libmysofa0 libnorm1 libopencore-amrnb0 libopencore-amrwb0 libopenjp2-7 libopenmpt0
  liborc-0.4-0 libpciaccess0 libpgm-5.2-0 libpostproc55 libproxy1v5 libraw1394-11 librsvg2-2 librsvg2-common librubberband2 libsamplerate0 libserd-0-0 libshine3 libshout3 libsidplay1v5
  libsodium23 libsord-0-0 libsoup2.4-1 libsoxr0 libspeex1 libsratom-0-0 libssh-gcrypt-4 libswresample3 libswscale5 libtag1v5 libtag1v5-vanilla libtheora0 libtiff5 libtwolame0 libv4l-0
  libv4lconvert0 libva-drm2 libva-x11-2 libva2 libvdpau-va-gl1 libvdpau1 libvidstab1.1 libvisual-0.4-0 libvorbisfile3 libvpx5 libwavpack1 libwebp6 libwebpmux3 libx264-155 libx265-165
  libxcb-dri2-0 libxcb-dri3-0 libxcb-glx0 libxcb-present0 libxcb-sync1 libxcb-xfixes0 libxdamage1 libxfixes3 libxshmfence1 libxv1 libxvidcore4 libxxf86vm1 libzmq5 libzvbi-common libzvbi0
  mesa-va-drivers mesa-vdpau-drivers pve-qemu-kvm spiceterm va-driver-all vdpau-driver-all
Paquets suggérés :
  gvfs i965-va-driver-shaders libbluray-bdj firmware-crystalhd libdv-bin oss-compat libdvdcss2 libfftw3-bin libfftw3-dev libvisual-0.4-plugins gstreamer1.0-tools jackd2 libraw1394-doc
  librsvg2-bin serdi sidplay-base sordi speex nvidia-vdpau-driver nvidia-legacy-340xx-vdpau-driver nvidia-legacy-304xx-vdpau-driver
Les paquets suivants seront ENLEVÉS :
  pve-libspice-server1
Les NOUVEAUX paquets suivants seront installés :
  dconf-gsettings-backend dconf-service glib-networking glib-networking-common glib-networking-services gsettings-desktop-schemas gstreamer1.0-libav gstreamer1.0-plugins-base
  gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly gstreamer1.0-x i965-va-driver intel-media-va-driver liba52-0.7.4 libaa1 libaacs0 libaom0 libass9 libavc1394-0 libavcodec58 libavfilter7
  libavformat58 libavutil56 libbdplus0 libbluray2 libbs2b0 libcairo-gobject2 libcdio18 libcdparanoia0 libchromaprint1 libcodec2-0.8.1 libcroco3 libcrystalhd3 libdconf1 libdrm-amdgpu1
  libdrm-common libdrm-intel1 libdrm-nouveau2 libdrm-radeon1 libdrm2 libdv4 libdvdnav4 libdvdread4 libfftw3-double3 libflite1 libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-bin libgdk-pixbuf2.0-common
  libgl1 libgl1-mesa-dri libglapi-mesa libglvnd0 libglx-mesa0 libglx0 libgme0 libgomp1 libgsm1 libgstreamer-plugins-base1.0-0 libgstreamer1.0-0 libgudev-1.0-0 libiec61883-0 libigdgmm5
  libjack-jackd2-0 libjbig0 libjemalloc2 liblilv-0-0 libllvm7 libmp3lame0 libmpeg2-4 libmpg123-0 libmysofa0 libnorm1 libopencore-amrnb0 libopencore-amrwb0 libopenjp2-7 libopenmpt0
  liborc-0.4-0 libpciaccess0 libpgm-5.2-0 libpostproc55 libproxy1v5 libraw1394-11 librsvg2-2 librsvg2-common librubberband2 libsamplerate0 libserd-0-0 libshine3 libshout3 libsidplay1v5
  libsodium23 libsord-0-0 libsoup2.4-1 libsoxr0 libspeex1 libspice-server1 libsratom-0-0 libssh-gcrypt-4 libswresample3 libswscale5 libtag1v5 libtag1v5-vanilla libtheora0 libtiff5 libtwolame0
  libv4l-0 libv4lconvert0 libva-drm2 libva-x11-2 libva2 libvdpau-va-gl1 libvdpau1 libvidstab1.1 libvisual-0.4-0 libvorbisfile3 libvpx5 libwavpack1 libwebp6 libwebpmux3 libx264-155 libx265-165
  libxcb-dri2-0 libxcb-dri3-0 libxcb-glx0 libxcb-present0 libxcb-sync1 libxcb-xfixes0 libxdamage1 libxfixes3 libxshmfence1 libxv1 libxvidcore4 libxxf86vm1 libzmq5 libzvbi-common libzvbi0
  mesa-va-drivers mesa-vdpau-drivers va-driver-all vdpau-driver-all
Les paquets suivants seront mis à jour :
  pve-qemu-kvm spiceterm
2 mis à jour, 140 nouvellement installés, 1 à enlever et 10 non mis à jour.
Il est nécessaire de prendre 86,0 Mo dans les archives.
Après cette opération, 407 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n]
 
Last edited:
Apollon77 said:
Yes 5.5-5.7. were not good ones ... 5.8 works well for me
Click to expand...
Well, version 5 (and 6 as far as I can see) are far slower than 3.12.15, my VMs are now 2/3 slower. Lets see if ZFS can do some magic... but for now it's a big disappointment.

Now we can install any version, perhaps I downgrade to version 3.12.15 again.
 
malevolent said:
Well, version 5 (and 6 as far as I can see) are far slower than 3.12.15, my VMs are now 2/3 slower. Lets see if ZFS can do some magic... but for now it's a big disappointment.

Now we can install any version, perhaps I downgrade to version 3.12.15 again.
Click to expand...
I started with v5 so do not really can compare :)
 
Hello there, (I am fairly new to Proxmox, Gluster and this forum),

I hope this information can help:

this night all my proxmox nodes (5.4 and 6.0) started to complain about an apt source missing (download.gluster.org);

searching about this subject, I found this mail thread on the Gluster-users mail list:

[Gluster-users] Important: Debian and Ubuntu packages are changing
*I can not post the URL but Google will do the job if you use the string above*

if this message is inappropriate, please, let me know and I will delete it.
 
  • Like
Reactions: Dominic
Yeeayy it seems that they removed the packages for Debian Stretch from the Comunity Repo ... why ever ... I asked on glusterfs mailinglist ... but kind of off-topic for here
 
  • Like
Reactions: Dominic
  • Like
Reactions: Atila Vasconcelos
Apollon77 said:
I started with v5 so do not really can compare :)
Click to expand...
Just for the record. With Debian 10 (or Proxmox 6) we cannot longer use Gluster 3.12.15 as it uses the deprecated liblvm2app. I managed to install the 3.12.15 version in one of my nodes, but on the other two was impossible to start the server daemon, and glusterfs-common had some dependencies unresolved... so I got upward to gluster 6.5. Luckily, I could move the VMs to other storage and I could recreate the bricks at pleasure.
 
malevolent said:
With Debian 10 (or Proxmox 6) we cannot longer use Gluster 3.12.15
Click to expand...
I read about your experiences with the bad performance (didn't test myself yet), but 3.12 has reached its EOL long ago.

Consequently, I'd recommend a more recent version of Gluster. PVE 6 now installs Gluster from Debian (5.5) as well as the latest Gluster 6.5 without any problems.
 
  • Like
Reactions: Atila Vasconcelos
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom
Back