[SOLVED] OVS bond+bridge: all ports of bond are down

cmonty14

Well-Known Member
Mar 4, 2014
343
5
58
Hello,

I have configured an OVS bond+bridge with 2 ports belonging to the bond.
Here's the relevant configuration in /etc/network/interfaces:
Code:
source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback

auto eno1
allow-vmbr0 eno1
##eno1

auto enp4s0f3
allow-vmbr0 enp4s0f3
##enp4s0f3

auto bond0
iface bond0 inet manual
        ovs_type OVSBond
        ovs_bridge vmbr0
        ovs_bonds eno1 enp4s0f3
        ovs_options bond_mode=balance-tcp lacp=active other_config:lacp-time=fast
        ovs_mtu 1500
##bond0

auto vmbr0
iface vmbr0 inet manual
        ovs_type OVSBridge
        ovs_ports bond0 vlan20 vlan30
        ovs_mtu 1500
        address 192.168.1.11
        netmask 255.255.255.0
##vmbr0

auto vlan20
iface vlan20 inet static
        ovs_type OVSIntPort
        ovs_bridge vmbr0
        ovs_options tag=20
        ovs_mtu 1500
        address 192.168.2.11
        netmask 255.255.255.0
##PVEGST

auto vlan30
iface vlan30 inet static
        ovs_type OVSIntPort
        ovs_bridge vmbr0
        ovs_options tag=30
        ovs_mtu 1500
        address 192.168.3.11
        netmask 255.255.255.0
##PVEMGRT

Here's the output of several ovs-vsctl commands that show the configuration and that the bond ports are down:
Code:
$ sudo ovs-vsctl show         
2c343626-31d7-4ade-800f-6e157287dcec
    Bridge vmbr0
        Port bond0
            Interface eno1
            Interface enp4s0f3
        Port vlan30
            tag: 30
            Interface vlan30
                type: internal
        Port vlan20
            tag: 20
            Interface vlan20
                type: internal
       Port vmbr0
            Interface vmbr0
                type: internal
    ovs_version: "2.15.0"

$ sudo ovs-appctl bond/show bond0
---- bond0 ----
bond_mode: balance-tcp
bond may use recirculation: yes, Recirc-ID : 1
bond-hash-basis: 0
lb_output action: disabled, bond-id: -1
updelay: 0 ms
downdelay: 0 ms
next rebalance: 2584 ms
lacp_status: configured
lacp_fallback_ab: false
active-backup primary: <none>
active member mac: 00:00:00:00:00:00(none)

member eno1: disabled
  may_enable: false

member enp4s0f3: disabled
  may_enable: false

$ sudo ovs-appctl lacp/show bond0
---- bond0 ----
  status: active
  sys_id: 4c:52:62:bc:97:7a
  sys_priority: 65534
  aggregation key: 1
  lacp_time: fast

member: eno1: defaulted detached
  port_id: 1
  port_priority: 65535
  may_enable: false

  actor sys_id: 4c:52:62:bc:97:7a
  actor sys_priority: 65534
  actor port_id: 1
  actor port_priority: 65535
  actor key: 1
  actor state: activity timeout aggregation collecting distributing defaulted

  partner sys_id: 00:00:00:00:00:00
  partner sys_priority: 0
  partner port_id: 0
  partner port_priority: 0
  partner key: 0
  partner state:

member: enp4s0f3: defaulted detached
  port_id: 2
  port_priority: 65535
  may_enable: false

  actor sys_id: 4c:52:62:bc:97:7a
  actor sys_priority: 65534
  actor port_id: 2
  actor port_priority: 65535
  actor key: 1
  actor state: activity timeout aggregation collecting distributing defaulted

  partner sys_id: 00:00:00:00:00:00
  partner sys_priority: 0
  partner port_id: 0
  partner port_priority: 0
  partner key: 0
  partner state:

What is causing this problem?

THX
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!