Network setup, can't ping CT routed IP

[GarrettB]

Regarding eno8, I wouldn't put an ip address on the Proxmox bridge. Set the gateway to be at the router.

 

[NIIcK]

This could be a point ... directing traffic to the router and its routing policies ... will try it out.

Cheers!

 

[GarrettB]

My System>Network:
enp2s0 Network Device
enp3s0 Network Device
enp4s0 Network Device
vmbr0 Linux Bridge enp3s0 192.168.1.xx 255.255.255.0 I have a NIC dedicated to incoming local
vmbr1 Linux Bridge
vmbr2 Linux Bridge enp2s0 WAN
vmbr3 Linux Bridge
vmbr4 Linux Bridge enp4s0 outgoing to local LAN in office
vmbr5

vmbr1, 3, and 5 are are virtual, no ip address noted on the bridge

 

[GarrettB]

I got hung up on this too. My rule of thumb is NICs get ip addresses, not bridges. But my exception is the node on vmbr0.

 

[NIIcK]

Guess I've solved it. I've set: net.ipv4.conf.all.forwarding=1 on the Proxmox machine and vmbr0 as inet manual. It now works.

Thank you!