Local Backup using pve-zsync

[yena]

Hello,
i have one server with Two Raid1:
First Raid 1 on 2 SSD with my VPS
Second Raid 1 on two sata HD for backup.

I would like to use pve-zsync localy for incremental backup:
is correct set this conjob ?:

30 06 * * * root pve-zsync sync --source 1000 --dest 127.0.0.1:STORAGE/SNAPSHOT --verbose --maxsnap 4 --name VPS1
-----------------------------------------------------------------------------
NAME USED AVAIL REFER MOUNTPOINT
STORAGE 821M 1.76T 96K /STORAGE
STORAGE/BACKUP 96K 1.76T 96K /STORAGE/BACKUP
STORAGE/SNAPSHOT 96K 1.76T 96K /STORAGE/SNAPSHOT
STORAGE/VPS 820M 1.76T 96K /STORAGE/VPS
STORAGE/VPS/subvol-100-disk-1 820M 899G 820M /STORAGE/VPS/subvol-100-disk-1
rpool 118G 242G 96K /rpool
rpool/LXC 67.5G 242G 96K /rpool/LXC
rpool/LXC/subvol-1000-disk-1 58.6G 31.4G 58.6G /rpool/LXC/subvol-1000-disk-1
rpool/LXC/subvol-2000-disk-1 8.85G 51.1G 8.85G /rpool/LXC/subvol-2000-disk-1
rpool/ROOT 1.22G 242G 96K /rpool/ROOT
rpool/ROOT/pve-1 1.22G 242G 1.22G /
rpool/swap 49.4G 292G 15.3M -
--------------------------------------------------------------------------------------------------

Thanks!

 

[fireon]

Have you done this with https://pve.proxmox.com/wiki/PVE-zsync#Create_a_recurring_sync_job then it should work corectly. But i never tested this with cronjob before. I only tested manualy.

 

[wolfgang]

Hi,
you don't have to use localhost for --dest
use <pool>/[subvol]