installation problem

[skilfisch]

hey guys i have got the followring problem by installing proxmox:

pveversion -v says:

pve-manager: 1.8-18 (pve-manager/1.8/6070)
running kernel: 2.6.32-5-amd64
pve-kernel-2.6.32-4-pve: 2.6.32-33
qemu-server: 1.1-30
pve-firmware: not correctly installed
libpve-storage-perl: 1.0-17
vncterm: 0.9-2
vzctl: 3.0.27-1pve1
vzdump: 1.2.6-1
vzprocps: 2.0.11-2
vzquota: 3.0.12-3


How can I fix it?

I've installed Debian 6.0 - minimal - 64bit and after it I changed the

sources.list with some entries to download proxmox

then i installed
apt-get install proxmox-ve-2.6.32

and configurated the network and i can't connect to the webinterfaces so i looked everything up ....

thank u for ur help

regards

 

[tom]

Proxmox VE 1.x series is based on Lenny, don´t install it on Squeeze. The upcoming Proxmox VE 2.x series will be based on Squeeze.

 

[skilfisch]

in teh webinterface stands that i am able to create KVMs is that right?

 

[proxymoxy]

What Tom meant is that they won't give you any support for your configuration. So don't expect any anwers

Having said that, I was able to install Proxmox 1.8 on Debian 6.0 (and software raid 1). I am not really an expert, but the "Lenny" instructions were easy enough. You probably overlooked something or maybe a typo somewhere. I noticed that the system seemed to worked, but I problem with shutting down VMs (I had to reboot the host quite a few times). For a "learning Proxmix" environment it was good enough, but for anything serious I would wait for Proxmox 2.0.

 

[udo]

...
running kernel: 2.6.32-5-amd64
pve-kernel-2.6.32-4-pve: 2.6.32-33
...

Hi,
you don't use the pve-kernel - this can't work! But i recommended a normal PVE-installation - or ontop on Lenny. Even for beginnes - if you know how pve works, you can play with unsupported things.

Udo