My hosting provider is Vultr; I run Proxmox on a dedicated BM server. The host perfectly connects to the internet; however, any VM I create does not connect to the network.
Desired outcome: The hypervisor Proxmox has its public IP, then one VM should have its dedicated public IP (the second public IP), and the other VMs should run in a LAN routed through the host or in a dedicated VLAN.
Having read through this: https://pve.proxmox.com/wiki/Network_Configuration and tried several configurations led to no successful attempts of VMs connecting to my network.
This is my current setup without having added a LAN:
What would you advise or require any additional information to solve this issue?
The second screenshot is when setting the VM up, it does not detect a network.
Desired outcome: The hypervisor Proxmox has its public IP, then one VM should have its dedicated public IP (the second public IP), and the other VMs should run in a LAN routed through the host or in a dedicated VLAN.
Having read through this: https://pve.proxmox.com/wiki/Network_Configuration and tried several configurations led to no successful attempts of VMs connecting to my network.
This is my current setup without having added a LAN:
Code:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
iface lo inet6 loopback
iface enp1s0f0 inet manual
auto vmbr0
iface vmbr0 inet static
address <public-ip1-of-proxmox-guest)>/<subnet>
gateway <gateway-of-public-ip1-proxmox-guest>
bridge-ports enp1s0f0
bridge-stp off
bridge-fd 1
pointopoint <public-ip2-for-dedicated-VM>
bridge_hello 2
bridge_maxage 12
auto vmbr100
iface vmbr100 inet manual
bridge-ports none
bridge-stp off
bridge-fd 0What would you advise or require any additional information to solve this issue?
The second screenshot is when setting the VM up, it does not detect a network.
