I am trying to setup GPU Passthrough but i cant get it to work.
I followed this documentation and setup everything as described there. I am seeing the GPU correctly under PCI devices in the guest (I tried Ubuntu, debian and Unraid) but the Nvidia driver is not detecting the GPU. Each time I run Nvidia-smi I get: "No devices were found"
Meanwhile in the logs I get the error: NVRM: GPU 0000:01.0: RmInitAdapter failed! (0x22:0x56:751)
Settings for VM (I also tried it with Primary):
What I tried so far:
- Nearly Every Nvidia Driver Version
- Diffrent PCIe Slot
- The mentioned OSs with different GPU configs and different BIOS (Seabios and OVMF) and also different OS Versions.
(GPU is outputting Video on boot so I would think no Hardware Problem.)
Hardware:
AMD Ryzen Threadripper 2920X
ASRock X399 Taichi
64GB DDR4
Nvidia Quadro P400 <-- GPU which is not working correctly
2x 250GB SATA SSD (for Proxmox and ISOs)
3x 500GB NVME SSD in raidz1 (for VMs and CT)
Anyone got similar Problems or any Tips?
I followed this documentation and setup everything as described there. I am seeing the GPU correctly under PCI devices in the guest (I tried Ubuntu, debian and Unraid) but the Nvidia driver is not detecting the GPU. Each time I run Nvidia-smi I get: "No devices were found"
Meanwhile in the logs I get the error: NVRM: GPU 0000:01.0: RmInitAdapter failed! (0x22:0x56:751)
Settings for VM (I also tried it with Primary):
What I tried so far:
- Nearly Every Nvidia Driver Version
- Diffrent PCIe Slot
- The mentioned OSs with different GPU configs and different BIOS (Seabios and OVMF) and also different OS Versions.
(GPU is outputting Video on boot so I would think no Hardware Problem.)
Hardware:
AMD Ryzen Threadripper 2920X
ASRock X399 Taichi
64GB DDR4
Nvidia Quadro P400 <-- GPU which is not working correctly
2x 250GB SATA SSD (for Proxmox and ISOs)
3x 500GB NVME SSD in raidz1 (for VMs and CT)
Anyone got similar Problems or any Tips?