Connection Error to port 8006

[rackdie]

I am trying to setup proxmox official supported module for whmcs and while testing connection to my proxmox server, it gives me this error
"failed to connect to 107.150.**.*** port 8006 after 1000 ms: connection refused"
Ill be really grateful if someone here can help me regarding this error. for reference i have attached the error below
My port 8006 is enabled on my server and my server isnt blocking any ports. I have even pinged my ip and port online and it shows that my port is enabled. I can access my proxmox dashboard easily too but still receiving this error

 

[DC-CA1]

Assuming you are trying to use modulegarden apps . I'm their wiki they ask you to check custom port . Even if 8006 is specified you need to

 

[ModulesGarden]

The likely cause of most such issues is firewall blocking the connection between WHMCS and Proxmox server. The following command can help you check whether this is also the case for you: https://pve.proxmox.com/wiki/Proxmox_VE_API#Example:_Get_a_New_Ticket_and_the_CSRF_Prevention_Token

Keep in mind that the command must first be adjusted in terms of password and Proxmox server address.

 

[yongsiklee]

Assuming you are trying to use modulegarden apps . I'm their wiki they ask you to check custom port . Even if 8006 is specified you need to

Could you explain in detail how to? How can I check custom port, etc?

 

[yongsiklee]

The likely cause of most such issues is firewall blocking the connection between WHMCS and Proxmox server. The following command can help you check whether this is also the case for you: https://pve.proxmox.com/wiki/Proxmox_VE_API#Example:_Get_a_New_Ticket_and_the_CSRF_Prevention_Token

Keep in mind that the command must first be adjusted in terms of password and Proxmox server address.

Tried. Not working. Access Hash is not taking it.

 

[ModulesGarden]

Tried. Not working. Access Hash is not taking it.

Please explain what do you mean by the access hash not taking it. Please also paste the command that you used (hide your token and IP) and the response received.

 

[yongsiklee]

Please explain what do you mean by the access hash not taking it. Please also paste the command that you used (hide your token and IP) and the response received.

curl -k -d 'username=root@pam' --data-urlencode 'password=mypassword' https://myIPaddress:8006/api2/json/access/ticket

I executed this above command in the proxmox server console.


And I got this responded:

{"data":{"cap":{"vms":{"VM.Clone":1,"VM.Config.Cloudinit":1,"VM.PowerMgmt":1,"Permissions.Modify":1,"VM.Config.HWType":1,"VM.Config.Network":1,"VM.Migrate":1,"VM.Audit":1,"VM.Snapshot.Rollback":1,"VM.Console":1,"VM.Monitor":1,"VM.Config.Options":1,"VM.Backup":1,"VM.Config.Memory":1,"VM.Config.CDROM":1,"VM.Config.CPU":1,"VM.Snapshot":1,"VM.Allocate":1,"VM.Config.Disk":1},"storage":{"Datastore.Allocate":1,"Permissions.Modify":1,"Datastore.AllocateSpace":1,"Datastore.Audit":1,"Datastore.AllocateTemplate":1},"access":{"Group.Allocate":1,"Permissions.Modify":1,"User.Modify":1},"nodes":{"Sys.PowerMgmt":1,"Sys.Modify":1,"Sys.Incoming":1,"Sys.Syslog":1,"Permissions.Modify":1,"Sys.Console":1,"Sys.Audit":1},"dc":{"Sys.Audit":1,"SDN.Allocate":1,"SDN.Audit":1},"sdn":{"Permissions.Modify":1,"SDN.Audit":1,"SDN.Allocate":1}},"clustername":"Prox-Cluster","username":"root@pam","CSRFPreventionToken":"6446D977:2ZKh/ImgCveAPso2lpjvFHciGiImpPMtI4dFlNtJODY","ticket":"PVE:root@pam:6446D977::txg4ef8fQol6z0QgmMKv3jt1tsokATcaLkbrJCisohraKyi+UVBwVL66opb0TbSLK50YcKWD9TamXhtjt53iENFihstK4oWBHrmUh4ULJDnWb23k5HFaU/IQm04NOQvITSLOJvj/66Zq4mqu9iGKlZug3tZqezY+X5LWyjRltYtigc7VAyh7Gg9nvyHEg5lQYrrdPQzyDoRY3PKNqB9CnkxNnXPBBWFZ9FN9N8PS8fNAGHzi0cIJsRG3C2g0QLQQKofEUqftKTta5wBi/jwSaKcNovcAWsZioJLFXipKMWxqGF1KrS9WobAoKH35XOCJvBhI21SVj08am0Sl3r/i6g=="}}

 

[yongsiklee]

Please explain what do you mean by the access hash not taking it. Please also paste the command that you used (hide your token and IP) and the response received.

What is it that I should be doing to connect to my proxmox server?

 

[ModulesGarden]

The response that you have received is correct. Please use the very same IP address in your WHMCS at the server configuration section and try connecting again.

Should the connection still fail after this action, please open a support ticket and simply send us the link to this thread and optionally provide us with your access details to enable us to check this out for you.

 

[yongsiklee]

Still connection refused. Proxmox port 8006 is not blocked at all as I have access all the time. I do not even have firewall at this time either.
I reinstalled it. Still not working.... The support cannot find solution yet... Anyone else here has any solution?

 

[yongsiklee]

I just found the solution.

 

[inggarv]

y Cual era

 

[larsen]

I just found the solution.

Thanks for letting other users know... ;-)

 

[Skyzone]

the solution is not clear.
Here is the solution of this.
if you are Hosted on cPanel or other Provider Make sure the Hosting is Allowed or Open Ports and Whitelisted the IP of the Node
this will give you fixed

 

[Inlakesh]

I just found the solution.

Do you mind posting the solution that got it working?