[TUTORIAL] Compile Proxmox VE with patched intel-iommu driver to remove RMRR check

txolo99 · Feb 28, 2019

Great job @Feni !!!

Comment two things:

1. Is necessary to remove the graphic card before doing this process?

2. In the installation of the required packages there two of them that are missing:

Code:

# pveversion
pve-manager/5.3-11/d4907f84 (running kernel: 4.15.18-11-pve)

# apt-get install git nano screen patch fakeroot build-essential devscripts libncurses5 libncurses5-dev libssl-dev bc flex bison libelf-dev libaudit-dev libgtk2.0-dev libperl-dev libperl-dev asciidoc xmlto gnupg gnupg2 rsync lintian debhelper libibery-dev libdw-dev libnuma-dev libsplang2-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package libibery-dev
E: Unable to locate package libsplang2-dev

Nullos · Mar 3, 2019

Hi, thanks for your tutorial !
I have a question, when i run the "make" command i have this messages (like your old post) :

root@pve:/usr/src/pve-kernel# make
gcc --version|grep "6\.3" || false
gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516
test -f "submodules/ubuntu-bionic/README" || git submodule update --init submodules/ubuntu-bionic
test -f "submodules/zfsonlinux/Makefile" || git submodule update --init submodules/zfsonlinux
(test -f "submodules/zfsonlinux/zfs/upstream/README.markdown" && test -f "submodules/zfsonlinux/spl/upstream/README.markdown") || (cd submodules/zfsonlinux; git submodule update --init)
Cloning into '/usr/src/pve-kernel/submodules/zfsonlinux/spl/upstream'...
fatal: remote error: access denied or repository not exported: /git/mirror_spl
fatal: clone of 'git://git.proxmox.com/git/mirror_spl' into submodule path '/usr/src/pve-kernel/submodules/zfsonlinux/spl/upstream' failed
Failed to clone 'spl/upstream'. Retry scheduled
Cloning into '/usr/src/pve-kernel/submodules/zfsonlinux/zfs/upstream'...
fatal: remote error: access denied or repository not exported: /git/mirror_zfs
fatal: clone of 'git://git.proxmox.com/git/mirror_zfs' into submodule path '/usr/src/pve-kernel/submodules/zfsonlinux/zfs/upstream' failed
Failed to clone 'zfs/upstream'. Retry scheduled
Cloning into '/usr/src/pve-kernel/submodules/zfsonlinux/spl/upstream'...
fatal: remote error: access denied or repository not exported: /git/mirror_spl
fatal: clone of 'git://git.proxmox.com/git/mirror_spl' into submodule path '/usr/src/pve-kernel/submodules/zfsonlinux/spl/upstream' failed
Failed to clone 'spl/upstream' a second time, aborting
Makefile:158: recipe for target 'submodule' failed
make: *** [submodule] Error 1

takipeti90 · Mar 5, 2019

Nullos said:
Hi, thanks for your tutorial !
I have a question, when i run the "make" command i have this messages (like your old post) :

root@pve:/usr/src/pve-kernel# make
gcc --version|grep "6\.3" || false
gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516
test -f "submodules/ubuntu-bionic/README" || git submodule update --init submodules/ubuntu-bionic
test -f "submodules/zfsonlinux/Makefile" || git submodule update --init submodules/zfsonlinux
(test -f "submodules/zfsonlinux/zfs/upstream/README.markdown" && test -f "submodules/zfsonlinux/spl/upstream/README.markdown") || (cd submodules/zfsonlinux; git submodule update --init)
Cloning into '/usr/src/pve-kernel/submodules/zfsonlinux/spl/upstream'...
fatal: remote error: access denied or repository not exported: /git/mirror_spl
fatal: clone of 'git://git.proxmox.com/git/mirror_spl' into submodule path '/usr/src/pve-kernel/submodules/zfsonlinux/spl/upstream' failed
Failed to clone 'spl/upstream'. Retry scheduled
Cloning into '/usr/src/pve-kernel/submodules/zfsonlinux/zfs/upstream'...
fatal: remote error: access denied or repository not exported: /git/mirror_zfs
fatal: clone of 'git://git.proxmox.com/git/mirror_zfs' into submodule path '/usr/src/pve-kernel/submodules/zfsonlinux/zfs/upstream' failed
Failed to clone 'zfs/upstream'. Retry scheduled
Cloning into '/usr/src/pve-kernel/submodules/zfsonlinux/spl/upstream'...
fatal: remote error: access denied or repository not exported: /git/mirror_spl
fatal: clone of 'git://git.proxmox.com/git/mirror_spl' into submodule path '/usr/src/pve-kernel/submodules/zfsonlinux/spl/upstream' failed
Failed to clone 'spl/upstream' a second time, aborting
Makefile:158: recipe for target 'submodule' failed
make: *** [submodule] Error 1

The HEAD on the master branch is not working, checkout the previous commit:

Code:

git clone -n git://git.proxmox.com/git/pve-kernel.git
git checkout HEAD^

takipeti90 · Mar 5, 2019

Hi all,

I could compile the kernel based on this tutorial, works fine.

But I have a question, after the kernel compilation I modified again the ACS override patch (inserted some debug messages) and tried to recompile again with:

Code:

# make

The compilation has started but after 10 sec it stopped without any error, see:

Code:

# make
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
gcc --version|grep "6\.3" || false
gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516
test -f "submodules/ubuntu-bionic/README" || git submodule update --init submodules/ubuntu-bionic
test -f "submodules/zfsonlinux/Makefile" || git submodule update --init submodules/zfsonlinux
(test -f "submodules/zfsonlinux/zfs-debian/debian/changelog" && test -f "/debian/changelog") || (cd submodules/zfsonlinux; git submodule update --init)
#

Should I rename the kernel again, clean and recompile? Because it is too much time if I have to do it always. Anyone has any idea why make did not work?

thanks

takipeti90 · Mar 5, 2019

txolo99 said:

Great job @Feni !!!

Comment two things:

1. Is necessary to remove the graphic card before doing this process?

2. In the installation of the required packages there two of them that are missing:

Code:

# pveversion
pve-manager/5.3-11/d4907f84 (running kernel: 4.15.18-11-pve)

# apt-get install git nano screen patch fakeroot build-essential devscripts libncurses5 libncurses5-dev libssl-dev bc flex bison libelf-dev libaudit-dev libgtk2.0-dev libperl-dev libperl-dev asciidoc xmlto gnupg gnupg2 rsync lintian debhelper libibery-dev libdw-dev libnuma-dev libsplang2-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package libibery-dev
E: Unable to locate package libsplang2-dev

# apt-get install libiberty-dev libslang2-dev

fabian · Mar 5, 2019

takipeti90 said:

Hi all,

I could compile the kernel based on this tutorial, works fine.

But I have a question, after the kernel compilation I modified again the ACS override patch (inserted some debug messages) and tried to recompile again with:

Code:

# make

The compilation has started but after 10 sec it stopped without any error, see:

Code:

# make
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LC_MEASUREMENT = "hu_HU.UTF-8",
    LC_PAPER = "hu_HU.UTF-8",
    LC_MONETARY = "hu_HU.UTF-8",
    LC_NAME = "hu_HU.UTF-8",
    LC_ADDRESS = "hu_HU.UTF-8",
    LC_NUMERIC = "hu_HU.UTF-8",
    LC_TELEPHONE = "hu_HU.UTF-8",
    LC_IDENTIFICATION = "hu_HU.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
gcc --version|grep "6\.3" || false
gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516
test -f "submodules/ubuntu-bionic/README" || git submodule update --init submodules/ubuntu-bionic
test -f "submodules/zfsonlinux/Makefile" || git submodule update --init submodules/zfsonlinux
(test -f "submodules/zfsonlinux/zfs-debian/debian/changelog" && test -f "/debian/changelog") || (cd submodules/zfsonlinux; git submodule update --init)
#

Should I rename the kernel again, clean and recompile? Because it is too much time if I have to do it always. Anyone has any idea why make did not work?

thanks

if you edit a patch, you need to rebuild the whole kernel - we don't support incremental builds in our Makefile as we always rebuild from clean source.

fabian · Mar 5, 2019

Nullos said:
Hi, thanks for your tutorial !
I have a question, when i run the "make" command i have this messages (like your old post) :

root@pve:/usr/src/pve-kernel# make
gcc --version|grep "6\.3" || false
gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516
test -f "submodules/ubuntu-bionic/README" || git submodule update --init submodules/ubuntu-bionic
test -f "submodules/zfsonlinux/Makefile" || git submodule update --init submodules/zfsonlinux
(test -f "submodules/zfsonlinux/zfs/upstream/README.markdown" && test -f "submodules/zfsonlinux/spl/upstream/README.markdown") || (cd submodules/zfsonlinux; git submodule update --init)
Cloning into '/usr/src/pve-kernel/submodules/zfsonlinux/spl/upstream'...
fatal: remote error: access denied or repository not exported: /git/mirror_spl
fatal: clone of 'git://git.proxmox.com/git/mirror_spl' into submodule path '/usr/src/pve-kernel/submodules/zfsonlinux/spl/upstream' failed
Failed to clone 'spl/upstream'. Retry scheduled
Cloning into '/usr/src/pve-kernel/submodules/zfsonlinux/zfs/upstream'...
fatal: remote error: access denied or repository not exported: /git/mirror_zfs
fatal: clone of 'git://git.proxmox.com/git/mirror_zfs' into submodule path '/usr/src/pve-kernel/submodules/zfsonlinux/zfs/upstream' failed
Failed to clone 'zfs/upstream'. Retry scheduled
Cloning into '/usr/src/pve-kernel/submodules/zfsonlinux/spl/upstream'...
fatal: remote error: access denied or repository not exported: /git/mirror_spl
fatal: clone of 'git://git.proxmox.com/git/mirror_spl' into submodule path '/usr/src/pve-kernel/submodules/zfsonlinux/spl/upstream' failed
Failed to clone 'spl/upstream' a second time, aborting
Makefile:158: recipe for target 'submodule' failed
make: *** [submodule] Error 1

seems like a repo is not exported on our public mirror (yet) - I'll try to get that sorted out ASAP.

fabian · Mar 8, 2019

fabian said:
seems like a repo is not exported on our public mirror (yet) - I'll try to get that sorted out ASAP.

should work again!

Nullos · Mar 8, 2019

Hi, thanks for the fix, it's ok for the repo, but i have another error :

Code:

dpkg-buildpackage: info: source package spl-linux
dpkg-buildpackage: info: source version 0.7.13-pve1~bpo2
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Proxmox Support Team <support@proxmox                      .com>
 dpkg-source --before-build spl-linux_0.7.13
dpkg-source: info: using options from spl-linux_0.7.13/debian/source/options: --                      extend-diff-ignore=.*
 debian/rules clean
make[2]: Entering directory '/usr/src/pve-kernel/build/modules/tmp/spl-linux_0.7                      .13'
dh clean --with autoreconf --parallel
make[2]: dh: Command not found
debian/rules:11: recipe for target 'clean' failed
make[2]: *** [clean] Error 127
make[2]: Leaving directory '/usr/src/pve-kernel/build/modules/tmp/spl-linux_0.7.                      13'
dpkg-buildpackage: error: debian/rules clean gave error exit status 2
Makefile:66: recipe for target 'spl-linux_0.7.13-pve1~bpo2.dsc' failed
make[1]: *** [spl-linux_0.7.13-pve1~bpo2.dsc] Error 2
make[1]: Leaving directory '/usr/src/pve-kernel/build/modules/tmp'
Makefile:134: recipe for target 'pkg-zfs.prepared' failed
make: *** [pkg-zfs.prepared] Error 2

Stoiko Ivanov · Mar 8, 2019

Nullos said:
dh: Command not found

please try installing 'debhelper'

Nullos · Mar 8, 2019

I need to install a lot of packages but it works !
Thanks for your help.

Feni · Mar 9, 2019

txolo99 said:
Great job @Feni !!!

Comment two things:

1. Is necessary to remove the graphic card before doing this process?

[/code]

No it is not, just follow the tutorial for RMRR check removal and whatever tutorial you are using for passthrough.

warnerizo · Mar 19, 2019

thank you my friend, this tutorial works like a charm on hp gen8 microserver

werter · Apr 19, 2019

Hi.

Not worked for me (HP Proliant G8 DL360e with latest BIOS).

This worked. And without kernel compilation

http://www.jimmdenton.com/proliant-intel-dpdk/

P.s. Replace xenial with stretch

Feni · Apr 19, 2019

werter said:
Hi.

Not worked for me (HP Proliant G8 DL360e with latest BIOS).

This worked. And without kernel compilation http://www.jimmdenton.com/proliant-intel-dpdk/

P.s. Replace xenial with stretch

This tutorial is only for the G6 and G7 variant (possibly the G5 too), the G8 and later has other options to deal with RMRR like the one you listed.

Where did I list xenial? I did not see any mention of it.

blockedpitottube · Apr 22, 2019

Hi!

do you have a recommended guide for passthrough?

I compiled the kernel according to your steps, and followed a ton of different guides.

I can get the GPU seen in windows - but can not get rid of the error 43!

Thanks!

werter · Apr 23, 2019

Hi.

Feni said:
This tutorial is only for the G6 and G7 variant (possibly the G5 too), the G8 and later has other options to deal with RMRR like the one you listed.

Did u try it with G5-7 hardware ? Just exclude the slot from RMRR with conrep utility. It's much, much easier than compiling new kernel.

Where did I list xenial? I did not see any mention of it.

You must did it here http://www.jimmdenton.com/proliant-intel-dpdk/

Feni · Apr 28, 2019

werter said:
Hi.
Did u try it with G5-7 hardware ? Just exclude the slot from RMRR with conrep utility. It's much, much easier than compiling new kernel.
You must did it here http://www.jimmdenton.com/proliant-intel-dpdk/

Conrep does not work for G6 and G7 hardware, otherwise I would not have written this tutorial.

The link you sent has nothing to do with this tutorial since Proxmox is not on Xenial.

Feni · Apr 28, 2019

blockedpitottube said:
Hi!

do you have a recommended guide for passthrough?

I compiled the kernel according to your steps, and followed a ton of different guides.

I can get the GPU seen in windows - but can not get rid of the error 43!

Thanks!

This is a good one: https://techblog.jeppson.org/2018/03/windows-vm-gtx-1070-gpu-passthrough-proxmox-5/

keli · Jun 4, 2019

One more package to install before changing kernel:
apt-get install python3-sphinx

Finaly, after about 30 days hard fight I have working GPU in VM on HP ProLiant dl380 G7. Thank You for this tutorial.

[TUTORIAL] Compile Proxmox VE with patched intel-iommu driver to remove RMRR check

Active Member

New Member

New Member

New Member

New Member

Proxmox Staff Member

Proxmox Staff Member

Proxmox Staff Member

New Member

Proxmox Staff Member

New Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member