can not aptitude full upgrade on a new install ** SOLVED **

Re: can not aptitude full upgrade on a new install

I had to reboot to get /etc/pve mounted.

after that :
Code: 
aptitude full-upgrade
The following packages will be upgraded: 
  redhat-cluster-pve 
The following partially installed packages will be configured:
  libpve-access-control pve-cluster 
1 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 643 kB of archives. After unpacking 69.6 kB will be used.
Do you want to continue? [Y/n/?] 
Get:1 http://download.proxmox.com/debian/ squeeze/pve redhat-cluster-pve amd64 3.1.92-3 [643 kB]
Fetched 643 kB in 2s (294 kB/s)             
Reading changelogs... Done
(Reading database ... 30298 files and directories currently installed.)
Preparing to replace redhat-cluster-pve 3.1.8-3 (using .../redhat-cluster-pve_3.1.92-3_amd64.deb) ...
Unpacking replacement redhat-cluster-pve ...
Processing triggers for man-db ...
Setting up pve-cluster (1.0-27) ...
Restarting pve cluster filesystem: pve-cluster.
input too long - aborting
dpkg: error processing pve-cluster (--configure):
 subprocess installed post-installation script returned error exit status 255
configured to not write apport reports
                                      dpkg: dependency problems prevent configuration of libpve-access-control:
 libpve-access-control depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing libpve-access-control (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of redhat-cluster-pve:
 redhat-cluster-pve depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing redhat-cluster-pve (--configure):
 dependency problems - leaving unconfigured
configured to not write apport reports
                                      configured to not write apport reports
                                                                            Errors were encountered while processing:
 pve-cluster
 libpve-access-control
 redhat-cluster-pve
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to install.  Trying to recover:
Setting up pve-cluster (1.0-27) ...
Restarting pve cluster filesystem: pve-cluster.
input too long - aborting
dpkg: error processing pve-cluster (--configure):
 subprocess installed post-installation script returned error exit status 255
dpkg: dependency problems prevent configuration of libpve-access-control:
 libpve-access-control depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing libpve-access-control (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of redhat-cluster-pve:
 redhat-cluster-pve depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing redhat-cluster-pve (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 pve-cluster
 libpve-access-control
 redhat-cluster-pve
                                         
Current status: 0 updates [-1].

So after 2 reinstalls we're back to the same issue.

This system is mainly used for nfs storage and backups. Which works. We can not use it for full pve.

So a new install with only aptitude full-upgrade done does not work.

If someone has a suggestion or wants ssh access to see what is up with this please let me know.
 
Last edited:
Re: can not aptitude full upgrade on a new install

RobFantini said:
I had to reboot to get /etc/pve mounted.

after that :
Code: 
aptitude full-upgrade
The following packages will be upgraded: 
  redhat-cluster-pve 
The following partially installed packages will be configured:
  libpve-access-control pve-cluster 
1 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 643 kB of archives. After unpacking 69.6 kB will be used.
Do you want to continue? [Y/n/?] 
Get:1 http://download.proxmox.com/debian/ squeeze/pve redhat-cluster-pve amd64 3.1.92-3 [643 kB]
Fetched 643 kB in 2s (294 kB/s)             
Reading changelogs... Done
(Reading database ... 30298 files and directories currently installed.)
Preparing to replace redhat-cluster-pve 3.1.8-3 (using .../redhat-cluster-pve_3.1.92-3_amd64.deb) ...
Unpacking replacement redhat-cluster-pve ...
Processing triggers for man-db ...
Setting up pve-cluster (1.0-27) ...
Restarting pve cluster filesystem: pve-cluster.
input too long - aborting
dpkg: error processing pve-cluster (--configure):
 subprocess installed post-installation script returned error exit status 255
configured to not write apport reports
                                      dpkg: dependency problems prevent configuration of libpve-access-control:
 libpve-access-control depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing libpve-access-control (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of redhat-cluster-pve:
 redhat-cluster-pve depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing redhat-cluster-pve (--configure):
 dependency problems - leaving unconfigured
configured to not write apport reports
                                      configured to not write apport reports
                                                                            Errors were encountered while processing:
 pve-cluster
 libpve-access-control
 redhat-cluster-pve
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to install.  Trying to recover:
Setting up pve-cluster (1.0-27) ...
Restarting pve cluster filesystem: pve-cluster.
input too long - aborting
dpkg: error processing pve-cluster (--configure):
 subprocess installed post-installation script returned error exit status 255
dpkg: dependency problems prevent configuration of libpve-access-control:
 libpve-access-control depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing libpve-access-control (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of redhat-cluster-pve:
 redhat-cluster-pve depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing redhat-cluster-pve (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 pve-cluster
 libpve-access-control
 redhat-cluster-pve
                                         
Current status: 0 updates [-1].

So after 2 reinstalls we're back to the same issue.

This system is mainly used for nfs storage and backups. Which works. We can not use it for pve .

So a new install with only aptitude full-upgrade done does not work.

If someone has a suggestion or wants ssh access to see what is up with this please let me know.
Click to expand...
Hi,
one thing, what not be discussed: It's looks like an non-standard installation (backports enabled...).
Why don't use an normal installation from the iso and do all upgrades? I'm sure that's will work.

Udo
 
Re: can not aptitude full upgrade on a new install

Udo
check my last reinstall note - on a fresh install there was at least one backport package done by the pve install.
 
Re: can not aptitude full upgrade on a new install

RobFantini said:
...If someone has a suggestion or wants ssh access to see what is up with this please let me know.
Click to expand...
Hi,can short look with ssh if you provide an IP.take this in /root/.ssh/authorized_keys
Code: 
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDBuay38CZahzauB7q/6G7HuKjgLI3E9/TmM/NfWLaLM2c86tmhNTb69yxvHM7JMgP19ffss4ZIj43IAmuMEvDlglpkpKP5QWjrIJQkrI1jIGi2YSBvK3yxFI9N9qHi0qRp7kZUdJCtLnXo7hI/Yf+yT8tV8txp+3cEPg0zd4GXRjkE9I/HBtU7UqWajW14ny8aAe7IgIODtO//JVytTxev4umsgDjw7l+ZmqpOQiesxn5VIx7IYf2gdB05gknMLiC1YOSOQP+RGZuMl4aLViqXYmyRaj79VL0Fps0b+6L/I/utjDYjh1FE10CrU8g/9XCgoPkWbgoryAQhvcSoMY89 udo
Udo
 
Re: can not aptitude full upgrade on a new install

RobFantini said:
Udo please use 75.147.34.33 , port 52008
Click to expand...
OK,
mission done!

"pvecm updatecerts" don't like an big /etc/ssh/ssh_known_hosts!!
Code: 
ls -lsa /etc/ssh/ssh_known_hosts.sav
136 -rw-r--r-- 1 root root 134237 Sep 16 06:28 /etc/ssh/ssh_known_hosts.sav
Perhaps you should fill an bug in the bugtracker!

Udo
 
Last edited:
Re: can not aptitude full upgrade on a new install

Udo,
well done on figuring that out!
and thank you for the help

we use a site wide /etc/ssh/ssh_known_hosts . guess I'll exclude that for pve systems.
 
Re: can not aptitude full upgrade on a new install

udo said:
"pvecm updatecerts" don't like an big /etc/ssh/ssh_known_hosts!!
Code: 
ls -lsa /etc/ssh/ssh_known_hosts.sav
136 -rw-r--r-- 1 root root 134237 Sep 16 06:28 /etc/ssh/ssh_known_hosts.sav
Click to expand...

I also experienced this.
Yes, I realize how old this thread is but this problem still exists and in my opinion is a bug.
I submitted a bug report here: https://bugzilla.proxmox.com/show_bug.cgi?id=616
 
Last edited:
You must log in or register to reply here.
Top Bottom