upgrade 6 to 7

  1. Upgrade Proxmox VE 6.4 No-Subscription to 7.x Enterprise Repository

    Hello, What's the better way to do an in-place upgrade to end up with a 7.x host with a subscription coming from a 6.4 non-subscription installation: activate the key and switch to the enterprise repository first, and then do the upgrade do the 6 to 7 upgrade while staying on the...
  2. Update von Version 6.4.15 auf Version 7.X

    Hallo zusammen, gibt es Erfahrungswerte bezüglich des Upgrades auf die 7 Version mit ifupdown2 und der keiner MAC-Adress Eintragung? Funktioniert das sicher und zuverlässig mit nur ifupdown2? Was wären den der Worst-Case? Meine Konstellation ist ifupdown2 in Version "ifupdown2/stable,now...
  3. Upgrade v6.4 to v7 | cannot re-join cluster after node upgrade

    Hello, I have started to upgrade one of our prox-mox clusters from version 6.4 to 7 using this guide https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0 After upgrading the first node, I cannot re-join the cluster. The PVE-services are all down (masked), and I'm not sure how to restart...
  4. [FAILED] Failed unmounting RPC Pipe File System - after dist-upgrade

    Hello, after upgrading from 6 to 7, i have noticed some stucks on the Filesyste.. was blocked making snapshot.. Rebooted, now during the reboot is blocked on this error: [FAILED] Failed unmounting RPC Pipe File System after two reboot seem start but i see a stange process: z_upgrade that use...
  5. PVE 6 to 7 checklist

    Hi, We got last 4 warnings, yet not sure where to make the changes to pass 2 and 3, I checked settings no where I could find maxfiles in the proxmox storage UX/UI . For 4, the custom role Pool.Audit is not present. 1 WARN: 4 running guest(s) detected - consider migrating or stopping them. 2...
  6. [SOLVED] Kein login mehr nach Upgrade von 6 auf 7

    Moin, ich gestern eine Proxmox-Installation auf die neuste 6er (6.4.15 war es glaube ich) gebracht und anschließend auf die 7er Version. Vorgegangen bin ich nach der Wiki-Anleitung: https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0 Laut der Shell war es fertig und da habe ich die die PVE per...
  7. PVE 6.4-15 to 7 upgrade hanging

    Hey folks, I'm having some issues upgrading PVE to version 7 on this system. It seems to be hanging at 58% during the upgrade. Here's where it's getting stuck: Found Debian GNU/Linux 10 (buster) on /dev/mapper/pve-vm--115--disk--0 File descriptor 3 (pipe:[188629]) leaked on vgs invocation...
  8. [SOLVED] Proxmox-server not reachable after adding hwaddress to /etc/network/interfaces (Upgrade VE 6 to 7)

    Hi, tonight I wanted to upgrade my Proxmox VE 6.4 to version 7. Following the instructions under https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0#Linux_Bridge_MAC-Address_Change I adjusted /etc/network/interfaces from root@proxmox-ve6:/# cat /etc/network/interfaces auto lo iface lo inet...
  9. Issue upgrading from 6 to 7

    Hello, in a two nodes cluster Master/Slave i have upgraded the Slave (empty) from proxmox 6 to 7. After this, replication stop working, so i can't migrate my VM from the Master (v6) to the Slave (v7) to perform the upgrade on the Master too. Any ideas ? Thanks!
  10. Upgrade package dont work after migration to pve 7-2-7

    Good Morning Everybody, I have this issue since i made upgrade form last pve 6 to pve 7-2-7 Do you know why ? I have reboot, apt clean, purge all files and folder in /var/lib/apt/lists/ without success. Thanks in advance ! The following packages were automatically installed and are no longer...
  11. [SOLVED] VM stops after upgrading and restarting other nodes of the cluster

    I have a 3 node test cluster set up to test 6.4 to 7.x upgrade. Ceph (version 14) is installed, one OSD/one monitor on each node, a pool is configured using the OSDs. A VM is created using the pool. It runs on node03. I upgrade Ceph from 14 to 15 without issues, restart the other nodes, migrate...
  12. Upgrade 6.4 to 7.x stuck dependencies

    Hello, I'm trying to upgrade a standalone node from 6.4-15 to 7.2. I followed the wiki page instructions. First try, #apt update then #apt upgrade. Second, #pve6to7 --full showed no errors or warnings. Third use #sed command to edit buster to bullseye (should have copied sources.list...
  13. [SOLVED] Proxmox Upgrade pve-apt-hook Warning

    Hallo zusammen Gerne würde ich von meiner Version 6.4 auf 7.x aktualisieren. Leider erhalte ich nach apt full-upgrade jeweils den Fehler wie andere hier im Forum: W: (pve-apt-hook) !! WARNING !! W: (pve-apt-hook) You are attempting to remove the meta-package 'proxmox-ve'! W: (pve-apt-hook) W...
  14. Proxmox backup server 1.1/2.2 and proxmox 6.4/7.2 compatibility

    Hello we started the proxmox live upgrade from 6.4 to 7.2. During the migration we have proxmox 6.x and 7.x proxmox nodes inside the same proxmox cluster. Will pbs 2.2 back proxmox 6.4 hosts with pb client 1.1 up? Will pbs 1.1 back proxmox 7.2 hosts with pb client 2.2 up? Or should we have...
  15. Issues with cephfs preventing upgrade from 6 to 7

    I'm a noob to whole virtualization and I have a tiny Lenovo m93 box (4 core 8GB) loaded with proxmox 6. Now when I try to update to version 7 using pve6to7 --full I get an error related to cephfs. = CHECKING HYPER-CONVERGED CEPH STATUS = INFO: hyper-converged ceph setup detected! INFO: getting...
  16. Error upgrading pve 6 to 7

    Hey, I have 3 nodes in cluster.. I already upgraded 2 of them, but when I try to upgrade the one I have left, I always get this error: After this operation, 8,862 kB of additional disk space will be used. Do you want to continue? [Y/n] y W: (pve-apt-hook) !! WARNING !! W: (pve-apt-hook) You...
  17. Upgrade from 6 to 7 stuck at 93% - File descriptor leaked

    Hi, I've been following the suggestions and steps from the Upgrade_from_6.x_to_7.0 wiki and, right now, I am stuck at 93% for more than an hour or so in the apt dist-upgrade execution. This is what the SSH screen shows now: Setting up libmath-random-isaac-perl (1.004-1.1) ... Setting up g++-10...
  18. Upgrade PMG from 6 to 7

    Hello, we have finished the upgrade from PMG (6-to-7) like the documentation. Now on the dashboard (and the cluster view) on both nodes of the (2 node) cluster we get the following error: 500 Illegal division by zero at /usr/share/perl5/PVE/ProcFSTools.pm line 221 The error looks like an...
  19. Ceph Dashboard not working after update to proxmox 7 (from 6.4)

    So ive just updated a cluster from proxmox 6.4 to 7.1 (along with ceph from 14 to 16). Everything works fine except one thing, and that is the dashboard. If i try to enable it i get: ceph mgr module enable dashboard Error ENOENT: all mgr daemons do not support module 'dashboard', pass --force...
  20. Nodes Reboot After Upgrade to 7.1

    Hi, We are operating a PVE cluster consisting of 7 nodes. Last week cluster was upgraded from 6.4 to 7.1. After the upgrade, we are experiencing almost random reboots on nodes. Could you please help to solve the problem?

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!