truenas scale

Heyho, zu erst zu meinem Setup: Ich habe mich vor einigen Tagen entschieden die meisten Backups auf ein Dataset meines TrueNAS-Scale Servers zu speichern. Hierzu habe ich einen SMB Share in meinen Datacenter eingebunden. Da das einbinden eines weiteren smb Share probleme bereitet hat, habe ich...

When I am trying to pass an entire SATA HDD to a TrueNAS Scale VM, which interface should I be using? SATA? SCSI? or Virtio Block? My Gigabyte H110 D3A motherboard only has one SATA controller, and four SATA ports on board. One of them is used for the Proxmox installation itself. As a result...

I have a Ubuntu 24.04 VM setup in Proxmox VE 8.2.4 on its own SSD and for some reason, file transfers to my local Truenas Scale SMB share are stuck at 55-60MB/s. I ran a Iperf3 test to the NAS and it caps out at 110MB/s so it's not a limitation of the network. This VM has 6 Ryzen 4600g cores...

Hi Folks, Hope everyone is doing well! Also thanks to anyone willing to help, I really appreciate it! So, I have been stuck on this for a while and I am banging my head against the wall at this point... I set up ProxMox Backup Server with a TrueNas SMB share following this tutorial...

I am having problems with my TrueNas VM as the host loses connection when I start the VM with my NVME SSD passed through to the VM. The VM runs fine if I dont passthrough the SSD. IOMMMU is active and no other VMs are running/taking resources. I am very new to working with linux and VMs, so it...

Hi all, New User here. I've been backing up all my VM's and containers to a TrueNAS Scale SMB share for a few months and recently updated Proxmox to 8.2.2 Since then my backups have stopped working although I've changed nothing on either one (Proxmox or Truenas). This is the output I'm getting...

I’m trying to add TrueNAS Scale to my proxmox server and I cant get the install to boot. The installation goes fine, says its good to go and to reboot, I do so, and it just boots back into the installer. I’m using the legacy BIOS option in proxmox as the installer wont boos on a UEFI VM. (I’m...

So I am new to Proxmox and have just installed it on my machine. and I am having some trouble figuring out how to (if even possible) import disk/datasets that already have data on them to a VM. so for some background. the machine that has Proxmox on had Truenas installed before I installed...

I am having a dilemma with my server configuration, namely I have 2 servers running at Home. Problem Statement: I am considering to setup 3 node Proxmox HA Cluster with CEPH considering all 3 nodes with same specs as Server 1 (given below). If I were to do this, what kind of performance gains...

Hi, i'd like to know if there i any way to use spindown easily in proxmox ? I'm running a vm with TrueNAS and i gave him basically all my disk and the whole server at best consume 80w wich is quite a lot and i really want to try my best to drop down the consumption. But after seeing some article...

I'm running a Proxmox VE with TrueNas Scale VM and Jellyfin as an unprivileged LXC container (installed through tteck's Helper Scripts). I followed this tutorial, minus the docker-compose part, to add media libraries in Truenas to Jellyfin. I mounted the sharename to /mnt/lxc_shares/nas_rwx on...

Hey everyone. I'm not sure if this counts as a Proxmox issue, but I wasn't previously having this issue running TrueNas baremetal so I think it might be a hypervisor issue. However, every 5 minutes with TrueNas simply idling it will crash sending a stop signal to Proxmox. It consistently will...

Hi Evryone. I got a Dell R720 with a H710 HBA on IT Mode. I installed Proxmox on an SSD that's connected to the SATA port used by the DVD drive (basically moved the DVD drive out and replaced it with a SATA Caddy) The plan is to run TrueNAS Scale and have access to all the drives on the H710...

I've setup a TrueNAS VM on my Proxmox. To allow it to "do its thing", I've passed the disks directly to the VM by their disk IDs with Serial numbers. This works perfectly, Truenas sees the disks and has happily made a ZFS pool out of them, I believe this is the best way to do it where the pool...

TL;DR: Can I have a TrueNAS SCALE server N1 sharing data over iSCSI with a Proxmox server P1 hosting a TrueNAS SCALE server N2 consuming said iSCSI drive? Hello, I have the following two working servers: N1: a TrueNAS SCALE (v23.10.0.1) server with nine 2TB HDD (in RAIDZ2 setup) and 64 GB of...

Hi Guys, I'm trying to install TrueNAS Scale VM on Proxmox 8.0 and in the process, I'm trying to pass-through 6 disk to the VM. I want to specify that my boot drive that proxmox is installed on are actually two mirrored NVMEs and it appears as ZFS in the system. 4 of the 6 disks are on a SATA...

Hi, I have been trying to setup a TrueNAS Scale VM through proxmox. I have the VM created and I can log into TrueNAS through UI just fine as well as see all of my HDDs I am trying to pool there. When I attempt to create the pool I continuously get an error: Error: one or more vdevs refer to the...

Hi there, I'm doing something quite trivial I have this controller and 4 HDD disks attached to it: root@sofx1010pve3307:~# dmesg |grep 2008 [ 0.256490] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da [ 3.309755] mpt2sas_cm0: LSISAS2008: FWVersion(20.00.07.00)...

Hi! When I move a VM's storage from `local-lvm` to a TrueNAS Core based ZFS volume over iSCSI, I get the following warning: Task viewer: VM 102 - Move disk create full clone of drive scsi0 (local-lvm:vm-102-disk-0) Warning: volblocksize (4096) is less than the default minimum block size...

Hi I just installed proxmox.. In pve - > disks I see both 1tb ssd(proxmox installed) and 8tb HDD with ntfd format and has windows with 7drives. I installed truenas as vm in proxmox. Now in truenas I can't see all disks to create pool nor I see the ssd too. How to have all drive in truenas...