truenas scale

Hi Evryone. I got a Dell R720 with a H710 HBA on IT Mode. I installed Proxmox on an SSD that's connected to the SATA port used by the DVD drive (basically moved the DVD drive out and replaced it with a SATA Caddy) The plan is to run TrueNAS Scale and have access to all the drives on the H710...

I've setup a TrueNAS VM on my Proxmox. To allow it to "do its thing", I've passed the disks directly to the VM by their disk IDs with Serial numbers. This works perfectly, Truenas sees the disks and has happily made a ZFS pool out of them, I believe this is the best way to do it where the pool...

TL;DR: Can I have a TrueNAS SCALE server N1 sharing data over iSCSI with a Proxmox server P1 hosting a TrueNAS SCALE server N2 consuming said iSCSI drive? Hello, I have the following two working servers: N1: a TrueNAS SCALE (v23.10.0.1) server with nine 2TB HDD (in RAIDZ2 setup) and 64 GB of...

Hi Guys, I'm trying to install TrueNAS Scale VM on Proxmox 8.0 and in the process, I'm trying to pass-through 6 disk to the VM. I want to specify that my boot drive that proxmox is installed on are actually two mirrored NVMEs and it appears as ZFS in the system. 4 of the 6 disks are on a SATA...

Hi, I have been trying to setup a TrueNAS Scale VM through proxmox. I have the VM created and I can log into TrueNAS through UI just fine as well as see all of my HDDs I am trying to pool there. When I attempt to create the pool I continuously get an error: Error: one or more vdevs refer to the...

Hi there, I'm doing something quite trivial I have this controller and 4 HDD disks attached to it: root@sofx1010pve3307:~# dmesg |grep 2008 [ 0.256490] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da [ 3.309755] mpt2sas_cm0: LSISAS2008: FWVersion(20.00.07.00)...

Hi! When I move a VM's storage from `local-lvm` to a TrueNAS Core based ZFS volume over iSCSI, I get the following warning: Task viewer: VM 102 - Move disk create full clone of drive scsi0 (local-lvm:vm-102-disk-0) Warning: volblocksize (4096) is less than the default minimum block size...

Hi I just installed proxmox.. In pve - > disks I see both 1tb ssd(proxmox installed) and 8tb HDD with ntfd format and has windows with 7drives. I installed truenas as vm in proxmox. Now in truenas I can't see all disks to create pool nor I see the ssd too. How to have all drive in truenas...

Hi chaps, Having a strange issue where my Intel T540-X2 nic won't seem to show it's full capabilities inside my TrueNAS Scale VM. Its using a Virtio driver. connected to a 10Gb switch. Ethtool on Proxmox host shows the correct linkmode, duplex and speed. Ethtool inside TrueNAS shows...

I am wondering the best approach to provide access to my remote file systems. I run into permissions issues regardless so I would like to confirm the approach to share access to files located on my trueNAS scale server. I have the file structure already setup and in use already by TrueNas scale...