ssd errors

  1. D

    ZFS Mirror Degraded

    We had configured a simple zfs mirror between two Samsung 870 QVO 4TB SSDs. Recently the state of the pool has changed to "degraded", one of the SSDs went completely offline, it didn't even respond to simple smart commands (I tried smartctl --all /dev/sda and it returned a generic error). You...
  2. F

    SATA controller passthrough to TrueNas VM.

    My SATA controller is in it's own IOMMU group, Currently there are 2 SSD's connected on the board (HP Elitedesk 800 G5). IOMMU group 4 00:14.2 RAM memory [0500]: Intel Corporation Cannon Lake PCH Shared SRAM [8086:a36f] (rev 10) IOMMU group 5 00:16.0 Communication controller [0780]: Intel...
  3. T

    SMART error (CurrentPendingSector) detected on host

    I recently set up a bare metal cloud server with a hosting company. I have 2 ZFS pools, 1 with sda/sdb and the other with NVME drives. I have been getting these errors for both sda and sdb: This message was generated by the smartd daemon running on: host name: midwestern DNS domain...
  4. M

    Proxmox8.1 not detecting the boot SSD

    I want to run Proxmox from a SSD. I went to the boot menu and selected the SSD ( a PNY 240GB ) and it boots into proxmox. However when it comes to the Target Harddisk the PNY SSD is not listed, only my laptops SSD is listed which runs Ubuntu and I dont want to install proxmox on that. Why the...
  5. H

    SSD Optimizaion

    Hi Everyone, I've got a Proxmox 7.3-3 install, with 6 1TB SSD's. 2 Samsung 990's, and 4 Samsung 870 EVO. These SSD's are MLC. I did some research and found there was/is a wearout bug with the 990's, but the wearout on the 870's is a bit concerning. I'm seeing extremely high wearout on a...
  6. P

    [SOLVED] [Critical issue] Proxmox won't boot and UEFI boot sequence takes minutes

    Hello everyone. I'd like to ask you for help with my proxmox setup. I will first describe my story and after then the errors. The story: Today i was about to install Hassio so i found nice script that would do it for me (my friend installed it the same way and it is okay so far). It immediately...
  7. M

    Vm error for truenas

    Hi This is my first experience with proxmox.. I intend to install truenas and win 11 as vm inside proxmox.. I installed truenas and then searched for ssd drive.. But it wasn't available. So I tried option Add - > pci device and selected samsung Evo 980 ssd... I got some error so by...
  8. B

    I/O Errors with 4x brand new NVME's WD SN530 256 GB proxmox 7.2.1

    Hello, Trying to figure out why the proxmox can see my new 4x disks in the GUI and once i click wipe out is start throwing errors and not been able to write or communicate with the drives. I also have another Crucial P1 1TB which works without any problems. I will appreciate your help just to...
  9. S

    /dev/dm-12 und dm-13 device error

    Hallo Leute, ich brauch bitte ganz dringend Eure Hilfe. vor etwas über einem Jahr habe ich ein Server installiert, der bis jetzt tadellos funktioniert hal. Jetzt macht er aber Mucken und startet teilweise die VMs bzw. LXCs nicht meht. Vermutich ist die SSD das problem, denn ich hab folgende...
  10. S

    VM won't clone -exit code 1

    I have a small server with 2 ea 256G SSDs. Proxmox 4.4-24 installed on sda along with 4 VMs. sdb is used for backups (clones) of the VMs from sda. Last week one of the 4 VMs failed to clone. Unfortunately I had already deleted the known good clone from sdb. (yes you can slap me). SMART...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!