1. F

    Adding 2.5" SATA SSD via PCIe adapter kills ethernet connection

    I am trying to add a 2.5" SSD to my system using the Accelsior S PCIe adapter card. When I add the card to the system and boot, I can see the disk drive in fdisk as well as format, add/remove partitions etc. But then my ethernet connection is broken: Jan 13 14:26:08 pve-1 networking[887]...
  2. U

    SATA SSD is not recognized lsblk

    Hi, i have a test server with 2 M.2 256GB. The proxmox is installed on these SSDs. There are also 4x 1TB SSD SATA disks which i can't access by proxmox v8. lsblk gives me the following output: sda 8:0 0 223.6G 0 disk ├─sda1 8:1 0 1007K 0 part ├─sda2 8:2 0 1G 0...
  3. P

    Hardware Kaufberatung für GPU Passthrough mit Proxmox 8

    Hallo zusammen, Ich stehe grad auf dem Schlauch. Benötige Hilfe bei Anschaffung der Hardware. Im Moment habe ich ein 550W Netzteil, Mainboard: Asrock B460M Pro 4 mit Intel i5 10400 (IGPU) sowie 16GB Kingston DDR4 im Dual Channel und drei SSD Speichermedien. Zwei von Crucial MX 500 (250GB) und...
  4. N

    Ceph uses false osd_mclock_max_capacity_iops_ssd value

    Hello everyone, I recently installed Ceph into my 3 node cluster, which worked out great at first. But after a while I noticed that the Ceph Pool would sometimes hang and stutter. Thats when I looked into the Configuration and saw this: I use 3 exactly the same SSDs, checked if every node uses...
  5. D

    ASMedia SATA Controller not recognized

    Hi Everyone. I need a little help here :) I decided do install PVE but my SATA Controller doesn't get recognized. Tested on Windows and everything works fine, so not a hardware problem. lspci -v returned that: .... 04:00.0 IDE interface: ASMedia Technology Inc. Device 0624 (rev 01) (prog-if 85...
  6. R

    [SOLVED] Samsung SM883/PM883 SATA SSDs for ZFS RAID1?

    So far I've read the Samsung SM883 would be great in general. Would that be so? There are also PM883s and cost 50% compared to the SM883. Are they both do their job, without queuing a regular (VM) Windows 10 update for example? I've been using 2 PNY CS900 and they hit the limit pretty fast...
  7. L

    [SOLVED] Proxmox IOMMU Passthrough crashes host

    I am building a small home server with Proxmox. In my system i have installed: Asus A520m-k Ryzen 5 Pro 5650G 1x SATA Controller (via PCIe) 1x PCIe to M.2 Adapter with an NVME Drive Now I want to setup a NAS, where I want to virtualize TrueNas Core. I want to passthrough the SATA Controller...
  8. X

    PVE can't recognize my hdd

    I installed a Synology system on the pve, then I bought a minipcie to sata product, after booting the pve did not recognize the hdd,The motherboard's own sata interface is normally recognized to hddI attach a link to the product to see if you have encountered it.PCI-E PCI Express to SATA 3.0
  9. M

    I can't manipulate drives on specific sata ports in proxmox

    I attempting to make a new zfs pool with more storage everything worked, and the drives showed up but, when I went to do anything to the drives no changes occurred. Then i tried several other commands that didn't work and finally reinstalled proxmox. That didn't work then I swapped Sata...
  10. F

    Ceph select specific OSD to form a Pool

    Hi there! i'm needing a little help. I have a Proxmox + Ceph cluster with 4 nodes, with the following HDDs in each node 2x 900GB SAS 15.000K 2X 300GB SAS 10.000K 2x 480GB SSD 2x 240GB SSD I need to make a Pool for each class and size of HD, the classes of the HDs know how to separate them, but I...
  11. T

    VirtIO SCSI vs SATA Bus/Device

    All the physical disks are connected to a regular SATA port on the motherboard. Which option to is the best to choose when creating a new VM? Thank you,
  12. W

    HP MicroServer Gen8 LSI 9211 HBA Passthrough (Proxmox 6.2)

    Hello all, I’m new around here and new to Proxmox. Fantastic work by all those involved, keep it up! I have been scouring the Internet and in particular this forum and the Proxmox subreddit, but cannot find a definitive answer on how or if PCIe passthrough works on the HP Gen8 MicroServer. I...
  13. M

    Host freezes on VM start when passing through SATA disk

    Hi everyone, On my home server I'm trying to pass through a SATA HDD to a VM (Debian/Openmediavault) via a cheap 2-port PCIe SATA controller (ASM1062). I followed the PCI passthrough instructions on the wiki ( Now every time I start up the VM with...
  14. N

    ceph nvme ssd slower than spinning disks16 node 40 gbe ceph cluster

    I am running the latest version of proxmox on a 16 node 40 gbe cluster. Each node has 2 Samsung 960 EVO 250GB NVMe SSDs and 3 Hitachi 2 TB 7200 RPM Ultrastar disks. I am using bluestore for all disks with two crush rules, one for fast nvme and slow for hdd. I have tested bandwidth between all...
  15. J

    ZFS Raid1 (2x 'cheapo' SSD) - additional single drive for backups?

    Hi there. I'm doing some maintenance on a desktop based 'server' used as SQL database host for ca 5 LAN users. It was running bios-software RAID1 on 2x Samsung EVO 250GB SATA SSD's. I know that those are NOT server grade but what can you do :/ 3rd drive is a regular 3,5" 1TB SATA for backups...
  16. DerDanilo

    SSD/NVME passthrough, support ssd/flash flag, rotation_rate=1/0

    It should be possible to set a virtual disk drive to be backed by an SSD/Flash device. Virtio SCSI with SCSI, VirtIO and SATA drives should support this. Virtual box supports this since 2014, when can we expect this to happen in PVE? According to the upstream sources this should be possible...
  17. P

    Proxmox 5.0 Adding Tape Drive For Windows Backups

    Hello, first time here but looking for some help. I have the latest proxmox and I'm trying to add a RD1000 tape drive to it so that windows server 2016 can see it as a tape drive, not just a disk. I can get windows server 2016 to see it as a disk but that creates problems, it doesn't allow the...
  18. A

    Supermicro X10DRi SATA ZFS error

    Hi good people. I am trying to install proxmox ve 5.2 on supermicro server. I have 2x SSD Intel DC3510 800GB connected to internal SATA controller (AHCI mode) on the motherboard Supermicro X10DRi. I want to make ZFS RAID10 installation but installation process ended with error: "unable to get...
  19. R

    Proxmox Windows Server 2016 VM

    Hallo, ich möchte gerne eine VM mit Windows server 2016 installieren. Mein Server hat zwei SSDs im Raid. Für die Festplatte nutze ich qcow2 aber was ist das beste IDE, SATA or Virtio? Sollte man discard aktivieren oder aus lassen? Ich habe kein LVM Speicher. Danke für jede Antwort, da ich...
  20. Q

    How to mount ssd to pve node(VM ID=700)?

    Hi, there! I am Cristina. I have a Linux LVM(1.7T) with RAID5. Now I want to mount a ssd(SATA) to one of my pve node(VM ID=700). ---------------------------- Device Start End Sectors Size Type /dev/sda1 34 2047 2014 1007K BIOS boot /dev/sda2 2048...


The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!