san storage

hi all , I have proxmox server , this server connected to san storage to get 11TB , my problem is he read 4 disks with same storage , for example #lsblk sdb 8:16 0 12T 0 disk └─sdb1 8:17 0 12T 0 part sdc...

Hello, I am looking for a SAN storage solution in scale-up configuration if possible in HA for VMs and lxc containers under proxmox. The ceph solution is very attractive in tandem with proxmox in a scale-out configuration but the hardware I have does not allow me to do it...

Hello I am volunteer administrator for a non profit organization in France . We have received a donation of an old hardware configuration with 2 servers and a SAN appliance: 2 Serveurs IBM 7944 52G 1x Six-Core Intel Xeon E5645 2.4 GHz (12 MB cache), 1x 4 GB PC3-10600 DDR3 1333 MHz LP SDRAM...

Hi Guys. I´m thinking of using either TrueNAS or Windows Server with it´s Storage capabilites. I´m not really sure which one to focus to have it as a Storage backend for my proxmox cluster which consist of 5 nodes. Mainly i want to have a very fast storage with high IO. Disks and everything...

Hello All, We are testing ProxmoxVE 6.3 in our environment. We have the configuration setup as below: 1. 2 * HPE DL360 Servers - Proxmox VE 6.3 installed in each. 2-port FC HBA in each server. 2. Cisco MDS 9148 SAN Switches. 3. QSAN Xevo 2026 AFA with FC HBA 4. Jetstor 812 FXD with FC HBA I am...

Hello! I'm running a PVE 5.2 cluster with 4 nodes. The cluster is attached to a SAN, an HP P2000 G3 iSCSI. VMs are hosted on the SAN. The first controller of the SAN failed. Everything is running on the second controller, but I can't manage PVE anymore. Although VMs are running, it seems that...

Hello, I'd like to install a test cluster with shared iSCSI storage / SAN. I read that the recommended solution is to use it as storage Omnios/Comstar. Can anyone recommend an Omios compatible 40G QSFP+ network card? ( tested ) I'm reading Illumos compatibility list, but is not so reliable, i...

Hallo, ich habe eine Testumgebung aufgebaut (PVE 6.1), bestehend aus 2x IBM X3650M3 und 1x DS3524. Das SAN ist direkt via SAS redundant angebunden unter Verwendung von multipath. Die SAN-Volumes sind in Proxmox vom Typ LVM shared angelegt. Soweit funktioniert alles zufriedenstellend. Sobald...

Hello, What do you recommend for a ZFS redundant two-node SAN? I Will use ISCSI to connect it to proxmox. My Storage configuration should support from 80 to 160 Tb of storage space. Thanks!

Hi, I have a number of proxmox hosts, and some connected to a Dell/EMC SAN. On most of the connected hosts i have added an iSCSI connection to the san and then either used the luns directly or added an LVM volume on top.However i'm trying to set up a new host now, and i can add the iSCSI...

Hi, I have a PVE cluster where all nodes are connected to several SANs using multipath. However one PV in LVM complains, that it is using one of the paths instead of multipath device: [node5@15:35 ~]# pvdisplay WARNING: PV 0tO1MK-jzPE-WKj4-RBi6-Ev9t-4Yvf-jXgNGF on /dev/sde was already found on...

Hello, I'm looking Solution PVE storage types. Setup Proxmox Cluster(HA) with SAN Storage Fibre Channel. I Setup LVM Storage types missing problem : Doesn't over-commit in the LVM space VM. I Setup LVM-THin Storage types missing problem : Doesn't Migration VM What should i use Storage...

Hello Proxmox Community! We've got a 6 node Proxmox cluster running the current version of proxmox 4.4. The disks of our VMs are located on one of our 2 multipathed iSCSI SANs. We got a new one this year and rebuilt our network with 10 GbE DAC Ethernet, a physically seperated 10 GbE LAN and...

Even this was already discussed in the forum, i'm opening a new thread because i didn't find a solution. We are in the process of setting up a small cluster (3/4 nodes), with no HA requirements. To each of this nodes the same SAN LUN is presented. The problem is: how we format and share the...

Hi everyone, I am currently using a 4 node Proxmox 3.4 cluster on a NFS storage, mainly used for web applications. I would like to expand the cluster and above all use it on a SAN storage. The problem is that I do not find a lot of info (manuals, books, forum, etc.) on how to develop a SAN...