pve

Hey Everyone. First I hope whoever sees this has a good day :) We're having an issue with our PVE cluster (v8.1.2) and backing up LXC containers that are run on a ceph pool It seems that sporadically and without cause, the snapshot stage of our backup job just fails, leaving the container...

Please Help. Hello, very new to linux and proxmox, trying my hand with a home server, but having little joy. The problem at hand now is the PC hanging/no web GUI, but I will give a bit of background. I installed PVE 8.1 directly on a simple home PC (MSI Z690, i5-12600, 32gb ram, mellanox 10gbe...

My PVE runs off a mirrored ZFS on 2 SATA SSDs, when my nightly backup job starts, the whole system including the VMs will eventually grind to a crawl. During this time, even SSH connections have trouble getting through to PVE, however, SSH to VMs are fine. At the same time, my Windows VM also...

Hallo, ich habe in Proxmox das Backup der LXC-Container konfiguriert. In der Mail steht folgendes: Betreff: vzdump backup status (pve.local): backup successful Details: 100 debian01 ok 1min 3s 857.447 MiB /mnt/pve/nas/dump/vzdump-lxc-100-2024_01_28-11_29_44.tar.zst Logs...

Guten Morgen, ich kann mich über die Web-GUI nicht mehr in die Shell einloggen und bekomme folgenden Fehler: "TASK ERROR: command '/usr/bin/termproxy 5900 --path /nodes/home1 --perm Sys.Console -- /bin/login -f root' failed: exit code 1" Ich denke, dass es daran liegt, dass ich gestern die...

Hello everyone, I'm studying the pve-installer source code, when I run make check-pve the installer starts, after going through all the steps, an error occurs when I try to install the packages: unable to open file '../pve-cd-builder/tmp/data-gz//pve-base.squashfs' - No such file or directory...

Hi there, Just bought a "Dual Intel X540 10GBE Network Ethernet" and installed it. On PVE version 8.1.3. I have restarted and the NIC is showing active link lights but not being detected by proxmox.

Hello, I hope someone can help me figure this out - searching for several days now but to no avail. I'm running Proxmox on an intel NUC, specifically the NUC13ANKi3. Connected to this I have a ICY BOX IB-RD3621-C31 disk array, containing one Toshiba MG Series 3.5" 20000 GB SATA. The disk...

Hello, How can I remove one one of the options shown or force it to use the latest environment? Thank you! Edit: One more question: Would these 2 pve's share any changes made to the grub or kernal? Just wondering because i'm trying to enable gpu pass through and my vm keeps saying "No IOMMU...

Hello, since a few days, we have on a PVE7 - standalone - host the strange issue, that VMs stuck and not responding (host unreachable) anymore. The root cause seems to be, that the host "/" is getting full: Some envs: Debian Bullseye pve-manager/7.4-17/513c62be Filesystem Size...

Hallo liebe Mitstreiter, ich habe mal wieder eine Frage. Ich würde gerne meine Proxmox Instanzen (PVE und PBS) an mein SIEM (Wazuh) anbinden, da diese relevante Teile meine Infrastruktur sind und somit besonders schützenswert sind. Dies sollte eigentlich kein Problem sein, da diese ja auf...

I currently have a virtual machine management application, I would like them to be accessible externally through a reverse. I have already configured the vnc args, but this does not suit me if there is a very high demand for access and the port control is not good, only if I could change the...

Hi everyone, I have a 4-node cluster PVE. Recently, my node (named Proxmox102) has automatically rebooted 2 times in 4 days. First time on 10th Dec and second time on 15th Dec. The syslog on GUI show nothing rather than "-- Reboot --". I also have 1 VM which is configured HA (I doubt that this...

DISCLAIMER: As became apparent over some troubleshooting under this post, please take note there are also genuine cases where networking or SSH itself has been misconfigured and the error message you have encountered is genuine, i.e. you are connecting to the wrong host. If you properly follow...

Hello starter here and i am thinking to install PVE on 2 dedicated SATADOMs (as mirroring boot drives), in order to save 2 sata slots from my mobo. Supermicro's solutions are these below: 64GB with READ/WRITE = 520/95 MB/S 32GB with READ/WRITE = 280/50 MB/S For both drives, supermicro gives...

It seems that PVE started to use Ubuntu based kernels since Xenial. It is not hidden, but it is not explained as a choice either (at least where I searched). 1. What are the reasons (in order of importance) for this? Hardware support? Feature-set? Security? Something else? 2. What will I break...

Hallo, ich habe noch bis vor kurzem ESXI und Veeam Backup genutzt, da ich immer mehr Open Source einsetze möchte PVE / PBS interessante Features bieten migriere ich gerade darauf. Bisher hatte ich die Backups vom Host mit Veeam ins Rechenzentrum gemacht über eine herkömmlich DSL Leitung (100...

Hi We have the following setup: 1 PVE Cluster with 4 nodes (each with 2 EPYC CPUs) and 256 GB RAM, and 8 x 2TB Enterprise NVMe u.2 disks) - storage CEPH on a separate 10GB network 1 PBS server integrated into PVE with 2 x 1TB (z1) SAS Enterprise disks and an HP LTO Tapedrive 15TB 1 TrueNAS...

Good morning all! I have a Proxmox cluster running with two hosts, with the following versions: Both running PVE 8.1.3 Host 2 (newest) - Kernel 6.5.11-5-pve (community edition w/o subscription Just added subscription w/enterprise repo). Last updated last night ~10pm US EST Host 1 (the 'OG') -...

I just bought a brand new WD 2TB Elements portable drive, connected using both USB3 and USB2 but the drive does not show under Disks, the drive works fine on my windows machine? I get communications error, could it be the type of USB3 connector with the newer WD drives? I can see my old...