public network

I need help i am new to proxmox server. during installation, I installed through private ip's that default showing it working fine on those private ip's. n/w access and so on. The internet provider provided a Public IP. So same as when i installed it again proxmox using those public IP during...

I have been battling with this for over a month any configuration on my VM's does not seem to fix my issue. Below is the image of my network setup provided to me with a deployment of Proxmox from my dedicated server host. eno1 & eno2: These are my 10Gb connections bond0: eno1/eno2 bonded...

Hello Proxmox Community, I am currently running a Proxmox VE cluster with Ceph storage, and I would like to add a second public network to my configuration. Here is my current setup: network interface: root@s1proxmox01:~# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state...

Hi Guys, So, I'm in a situation where I want to change the ceph public network, I've read up on it quite a bit, and before "testing" it in production ;-) I built a virtual test environment, which amazed me, it was actually quite easy and I want to fact check it here... The virtual cluster...

Hi, we are in the following productive situation 5 x PVE CEPH Storage with 2x1GE NIC and 1 x dual 10GE NIC (LACP) for the CEPH public network 5 x PVE Compute Nodes with 2x1GE NIC and 2 x dual 10GE NIC (LACP), one is for the CEPH public network 2 x MLAG/LACP connected 10GE Switches (Lenovo, low...

Hi, I have completed setup of 6 node cluster running PVE and Ceph. This is my ceph configuration: root@ld3955:~# more /etc/pve/ceph.conf [global] auth client required = cephx auth cluster required = cephx auth service required = cephx cluster network =...

Hi, I have identified a major issue with my cluster setup consisting of 3 nodes: all monitors are connected to cluster network. Here's my /etc/ceph/ceph.conf: [global] auth client required = cephx auth cluster required = cephx auth service required = cephx...

Dear all, I've been struggling with setting up my server for a few days now. Here is my situation: I have a server with one network interface. I have a public IP x.x.x.3 and i ordered another public ip wich is x.x.x.21 What I'm trying to do is to setup two subnets, one for each public IP. I've...

Hallo! Wir haben fünf Knoten mit Ceph im Einsatz, Ceph hat sein eigenes privates Netz mit GigaBit LAN Karten, physisch vom Public/Firmennetz getrennt. Die Performance aller VMs ist super schnell, 2-7 ms Latenzzeiten, und das konstant. Die Restore Geschwindigkeit beträgt im Durchschnitt 10-15...

I have two Proxmox VE 4.1 nodes in differents networks in internet. Is possible create a cluster? Thanks in advance!