pci

Hello Guys, Server: PowerEdge r630 I have 2 RTX 5090 GPUs, I got a riser and attached the first one and was working perfectly without any issues. Then, I connected the second one through the butterfly-riser PCI. And the second one was not getting detected then when i removed the second one...

Hello, I am experiencing an issue with USB passthrough when connecting multiple TTY USB devices through a USB hub attached to a PCI Express port. The setup and problem are as follows: I connect a single TTY USB device to the USB hub and pass it through to an Ubuntu 22.04 VM using the Proxmox...

Hello, Issue Description I am experiencing an issue with USB passthrough when connecting multiple TTY USB devices through a USB hub attached to a PCI Express port. The setup and problem are as follows: I connect a single TTY USB device to the USB hub and pass it through to an Ubuntu 22.04 VM...

Hi there! Having an issue with a new server build (Dell R730) running Proxmox as the hypervisor. I'm trying to pass the controller (and therefore all disks) through to a TrueNAS VM. The R730 came with an H730 RAID Card which I switched to HBA mode, but I ran into the issue detailed below and...

Hello, I use proxmox with kernel: # uname -r 6.8.12-2-pve I have ASUS Radeon RX 7900 XTX TUF Gaming OC 24GB GDDR6 installed in PCI slot From proxmox I can see it as: 03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 31 [Radeon RX 7900 XT/7900 XTX] (rev c8)...

Lets see how much I can post ahead of questions. Feels like the interrupt (IOMMU) is only half enabling? System is a Dell XC730xd-24 2x Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz Trying to get a NVidia P40 to pass through. https://imgur.com/a/LF2wIML lots of output of various commands I see...

Hello, I am trying to passthrough a PCIe card (LSI sas 2008) on the motherboard (PRIME B450-PLUS) I have enabled the settings in the BIOS, the VM I am trying to boot with has the latest Debian, I have also disabled ballooning for the memory. I add the PCI in the hardware setting of the VM...

I am new to Proxmox and am having some trouble setting up passthrough. I have made sure that Vt-d and all other settings are enabled in bios. I have edited the Grub file and reloaded and rebooted, but proxmox is still telling me that IOMMU is not enabled. So any help from someone more...

Guten Tag, zu erst ein paar Infos: Zum System: ASrock b450m pro 4 R2.0 AMD Ryzen 5 5600G 32 GB RAM Proxmox 8.1.10 root@pve-02:~# dmesg | grep -e DMAR -e IOMMU [ 0.379933] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 0.381426] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap...

I had a roadblock today and figured it out, but I want to understand the difference. I configured now three systems with iommu and pci-passthrough. Everytime appending intel_iommu=on at /etc/kernel/cmdline was enough. Those were on a: ASUS Prime Z590-P MSI MEG Z590 ACE ASUS B450M-K II MSI MEG...

Hi, I changed motherboard and CPU recently on my server and a lot broke. But finally, when I got proxmox to boot and got access to the web interface, I have to passthrough my PCIe devices again. The problem I am running into is that when following the guide PCI Passthrough, when I run; dmesg |...

Hi All, I've noticed that every time I upgrade my kernel to the latest prod PVE version the ID's on my NVIDIA cards change. I have to alter the configuration file for the LXC's that use video cards manually every time after a ls /dev/nvidia* and ls /dev/dri* to match the changes. Is there a...

Hi! My Proxmox server have been crashing randomly and today it happend again so I started to try solve it. I tried to only run unRaid and I noticed that it runs fine until I start a parity check. Then Proxmox almost imedietly freezes and prints what looks like a PCIe error on the screen (see...

I'm trying to passthrough 2 GPUs to the same VM without luck. If I boot it with only one of them configured, the VM boots and everything works as expected. But when I configure both at the same time, the VM doesn't output anything nor collects logs (checked multiple logs inside `/var/log` and...

I don't understand why my virtual machine won't start, it gives me this error I am a beginner in using proxmox

Hello, I'm using Proxmox and trying to pass through a specific PCI device (Multimedia controller: Altera Corporation Device 4c15) to a VM. I've encountered a phenomenon where after attempting this setup, the host's other PCI devices start having issues, and the VM itself also appears to fail to...

Hello, I am have macOS Ventura installation done. Now I tried to do GPU passthrough via PCI but I have macos Ventura stuck on apple logo (1/3 progress bar). I n Hardware of the VM I have PCI set to RX 580 and Display set to VMware I get the following In the console I get to selecting the MacOS...

Hi all, As the title states, I have a 2nd NIC on my HP ProLiant DL360p Gen8 server (The first NIC is a quad 1Gbps NIC). Upon getting my hands on the NIC, I installed Proxmox 7.1-7 and ran the following script I wrote: #!/bin/bash # Configure apt sources and install necessary packages...

Hello, I've been trying to create a VM for audio editing/production and so I've been trying to passthrough my Focusrite Scarlett 2i2 audio interface to it. Since I've been passing through GPUs and other devices without any apparent issues, I thought this would be an easy job. However, when I...

I've been running Proxmox for close to a year now and it's been rock solid. I currently have an OMV VM with 2 HDD passthrough. Just recently I found out that I can passthrough the entire SATA controller and I want to do that. Hope you guys can help me with some questions related to it. My...