iscsi

  1. I

    iSCSI storage digest configure

    Hello! I encountered the following problem when configuring iSCSI storage: Unable to configure Header/Data Digest for specific target. I can enable Digest for all connections in /etc/iscsi/iscsid.conf #node.conn[0].iscsi.HeaderDigest = CRC32C / None #node.conn[0].iscsi.DataDigest = CRC32C /...
  2. T

    File Server: pci passthrough to VM and back by iSCSI/NFS?

    Hello, I recently migrated my home lab from Hyper-V to PVE. As next I want to re-design my file server by taking advantage of ZFS file system. Before, on Hyper-V I used MS Windows Server as File Server that was running as a VM on the Host. On the Host was set-up Storages Spaces with ReFS and...
  3. M

    Mounting iSCSI Share to LXC Container

    Hello, I am currently trying to mount a iSCSI Share to an LXC Container. If I try to mount the iSCSI Share directly to the LXC Container I get the following error message: "iscsiadm: read error (-1/104), daemon died? iscsiadm: iSCSI driver tcp is not loaded. Load the module then retry the...
  4. A

    Problems after upgrade to PVE 8.1.3

    Hi. After the upgrade to PVE 8.1.3 - 2 problems. 4 nodes in the cluster. The storage is Synology. 2 problems: 1. On all nodes, logs of the following type: iscsid[1363]: connection-1:0 cannot make a connection to fe80::211:32ff:fefe:dc69:3260 (-1,22) 2. Empty graphs for nodes. I rebooted all...
  5. S

    iSCSI and LVM issues after NAS IP change

    My Proxmox server (version 8.1.3) is hosting several virtual machines, the first of which is TrueNAS Scale. Three of the other machines use iSCSI from TrueNAS as block storage. I imported the three iSCSI block storages into Proxmox and built LVMs on top of each. Everything was running...
  6. S

    [SOLVED] Problems installing 8.1 and iscsi/multipath on root filesystem on HPE BL660c blade with HPE 650FLB hba/nic

    Hello, I'm working on a poc to install proxmox on an HPE BL660c blade connected to an iSCSI san using be2iscsi based controller/nics. I have it mostly installed and working, though I've run into a problem with iscsi. I've been reading through the forums and googling for both proxmox and debian...
  7. M

    Network configuration for a new cluster

    Hi there. I have 3 nodes and I would like to set up a cluster, using a Dell M5024 SAN as a storage, accessibile via iSCSI. I know that this setup have drawbacks (no thin provisioning, no snapshots) but I already have the hardware, so I have to deal with it. Each server has: 8 10Gb ports 2...
  8. A

    [SOLVED] iSCSI + Discard + SSD emulation?

    I am currently migrating some VM disks from internal drives to multipath iSCSI. I am new to iSCSI and so am wondering about best practices for PVE VM disks hosted on there. By default I have all VMs set to Discard and SSD emulation, but I am now wondering if those settings make sense on iSCSI...
  9. C

    TrueNAS VM using Proxmox local disk (system) and remote iSCSI (data) from another TrueNAS?

    TL;DR: Can I have a TrueNAS SCALE server N1 sharing data over iSCSI with a Proxmox server P1 hosting a TrueNAS SCALE server N2 consuming said iSCSI drive? Hello, I have the following two working servers: N1: a TrueNAS SCALE (v23.10.0.1) server with nine 2TB HDD (in RAIDZ2 setup) and 64 GB of...
  10. Z

    Moving VM's storage to iSCSI: "can't allocate space in iscsi storage"

    Hello I want each separate LUN under my iSCSI target to serve as a raw storage for a single VM disk image. I have added iscsi storage making sure to check the "Use LUNs directly" option. What I can do: Create a VM with iSCSI LUN (whether empty or not) attached as its virtual disk Install an...
  11. S

    iSCSI Settings on Proxmox with multipath

    Hello everyone, we have IBM 5200 Flashsystem storage with 2 Controllers, each controller have 2x 25Gbps connections this storage have 8 volumes so I have 8x wwids each wwid is represented 4 times on all 4 ports total of 32 devices under sdXX we created 8 volumes on proxmox connected to the...
  12. L

    does PBS support iSCSI disk?

    sdb is a iSCSI disk, I can mount it, and create fs and datastore, how can the disk list command show it ?
  13. H

    Infortrend iSCSI and proxmox

    Hello, We are trying to connect the infortrend ds3012 SAN storage to the proxmox version: pveversion pve-manager/7.4-16/0f39f621 (running kernel: 5.15.108-1-pve) The storage has a network interface on the same subnet as the proxmox cluster. Several partitions have been created and LUN mapping...
  14. D

    Proxmox iSCSI Migration funktioniert nicht.

    Moin, bei der Migration eines LXC-Containers, tritt folgendes verhalten auf, Migration läuft für ca. 5m, bei voller Geschwindigkeit auf das iSCSI-Share, danach passiert "nichts" Das ist der Output: Wiping ext4 signature on /dev/Proxmox-LUN-1/vm-155-disk-1. Logical volume "vm-155-disk-1"...
  15. A

    Migrating from iSCSI to NFS

    Hi, i have a proxmox cluster of 2 nodes, connected via a 10Gb network to a QNAP Nas. Currently, all my vm disk are stored on that NAS using iSCSI. I would like to move from iSCSI to NFS. So, i created the NFS datastore on proxmox and all just works. But, regarding the migration, i currently...
  16. T

    oVirt Replacement with Proxmox

    Hi Community, please note that we are planning to replace our oVirt setup with 7 hosts and 330 VMs. The VMs are located on iSCSI which is shared among the hosts. From the documentation it looks like that Proxmox is not capable of using iSCSI luns in a similar way like oVirt. Means features...
  17. I

    Proxmox cluster shared iscsi storage problem with directly connected hosts

    Hi, I have two proxmox 8.0 hosts in a cluster, conected (each) directly to iscsi storage (don't have SAN switch yet). I have multipath installed and configured, and successfuly see storage from both hosts if I create separate iscsi targets ( Cluster -> Storage -> Add -> iscsi) for both hosts...
  18. P

    iSCSI, LVM and HA confusion

    So I have a simple 3-node Proxmox lab + Synology NAS. My goal is to be able to build images using Hashicorp Packer and create VM's using Terraform declarations based on those images later. As far as I understand in order to create a VM from an image the storage of this image must exist on a...
  19. P

    iSCSI Multipath Preferred network

    Hi everyone! I would like to ask you for help: I have a Proxmox 8 installation with next networks: vmbr0 (10Gbps network) Management network/proxmox web-interface (192.168.10.0/24) vmbr40 (40Gbps network) trunk connection with vlan awareness enabled vlan9 (part of vmbr40 iface) (192.168.25.0/24)...
  20. A

    Connecting proxmox to NAS issue

    Hello, I am using Proxmox VE and i connect the initiator of proxmox to the external storage , in my case the external storage is NAS as showin in the capture . I add iSCSI storage from Proxmox VE interface ( Datacenter => Storage => add iSCSI ) . After that, i want to format the added...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!