Hi there!
Background:
I'm very new to all of this (e.g. not familiar with networking or coding, primary environments are Mac/Android, etc), but excited to take the dive. I've accepted that the only way I'll actually fix my problem is by posting my issues, not trying to follow another's...
I'm having difficulty with the iso installer having gflashed to usb it isn't eve recognised as a bottle drive I'v tried several sick and have used both etcher on a Mac and dusimage writes in linux I've also tried too boot an iso in parallels on my ma and again it isn'y recognised as having a...
Moin,
ich bin dabei meinen bare metal Server auf einen Proxmox Host umzuziehen. Lese mich nun schon seit Tagen in das Thema ein und bin leicht überfordert ;)
Proxmox soll zukünftig auf einer kleinen stromsparenden dennoch leistungsfähigen AMD Appliance laufen.
Das System hat 2 M.2 Slots. Zur...
Hey all! I'm looking at trying out Proxmox on an old T420 Thinkpad laptop I have lying around. I created a bootable USB of the latest version (7.3-1) of Proxmox and filled out the installation wizard. I ended up getting to the end, at 99% complete, and am greeted with this message:
>...
I install Proxmox VE 7.3 iso from USB, but after a successful install, I'm unable to connect with the web GUI. Attaching few outputs for reference.
Please help me to fix this
/etc/network/interfaces
ping 8.8.8.8
/etc/hosts
ip addr
Hi All,
I would like to know your recommendations for the installation of Proxmox inside a DL380 G10 Server.
All drives are SSD. (Raid 10 could be my best path, as for the implementation of the disks?)
Which raid is recommended to use, both windows servers (and BBDD) and Linux servers will be...
I currently have Proxmox installed on a zfs single disk, and want to move it to a zfs mirror. The tricky part is that the disk it is on now will be one of the disks in the mirror. How would I move the install to a temporary location, create the mirror with the two disks, and then move the...
I have a DELL Poweredge R630 with the current setup:
CHIP: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 24 cores
RAM: 64GB
STORAGE: 10x 1.2TB SAS drives for RAID 10 DELL PERC H730 Mini gives me around 6TB in RAID 10
I will format this server and install proxmox. The confussion is from watching...
Started with a new/clean install of Debian 11.5, and followed the instructions installing Proxmox, to the point:
Connect to the Proxmox VE web interface
At this point there are no longer any defined network connections. Seems my two existing network connections were disabled. Apparently...
I am setting up a new PVE node as follows :
* 2 x 480 GB SSD for Proxmox VE (Z-RAID1)
* 2 x 2TB for local backups and other storage (RAID-1)
CPU will be Intel Xeon E-2334 @ 3.40GHz, 64GB of RAM.
The load would be about 12 VMs, mostly Debian 11 with light loads, but also a couple of Windows...
Hello everyone,
im trying to install Proxmox 7.2 VE on my HP ProLiant DL380 G6. I get into the Bootloader and after booting the Kernel i see the initsystem Output. But at the Point where Xorg with the Installation starts, my Monitor (FullHD 60Hz) goes blank and shows an "Signal out of range...
Hello,
I am trying to install proxmox on Leonovo 7Y49 server with 2 harddisks.
When I start installation I get error from proxmox window that there is no HDD.
I tried to switch from RAID to AHCI but it didn't help.
I am first time doing this.
when Install last version of proxmox in my computer result end with a grey screen pointer.
Asus tuf gaming x570 plus
Ryzen R9-3950x
64Go
during installation (see in join video) we can see error ahci with harddrive.
my video capture
Hi,
yesterday i tried to install PVE on a Dell PowerEdge R210.
Therefore i put the ISO on a bootable USB stick. After clicking "Install proxmox" on the first proxmox page the monitor became black and showed "unsupported mode".
The monitor was connected with VGA on the integrated graphic card. So...
Dear,
I installed proxmox on a dedicated server with 128Gb RAM. After a couple days a saw that my RAM was filled over 60% (almost 70%) with only 3 VMS each 4GB. Therefore I was searching on the internet and read that ZFS uses 'free' RAM to cache. I was wondering if this is a static behaviour...
Hello Everyone,
I've searched through forums here for a bit and have determined I am having a space issue on my proxmos host drive.
This is not an inodes issue as far as I've determined.
These drives are 2x 256 SSDs running in a ZFS pool - ever since I upgraded to a recent proxmox version to...
Hallo zusammen,
Ich bekomme Proxmox leider nicht zum laufen. Nach dem Installation-GUI, wo man die Installation starten kann, bleibt der Bildschirm schwarz.
Es sollte auch nicht am Boot Stick liegen (Rufus und etcher habe ich beide ausprobiert sowie zwei verschiedene USB Sticks).
Wähle ich...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.