grub

Hello, I installed proxmox 8.3.2 on Debian 12 following these steps https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_12_Bookworm. I have a pc with windows 11 and debian 12 and I had a grub config where I could select windows or debian. Now, after installing proxmox and removing the...

I installed PVE 8.* to SSD in ODD Slot (which is recognized by onboard Controller as Slot 4 after adding 3 drive into Bays) and would like to chainload from mSD to this SDD PVE Installation. As seems there is no other possibility then grub and chainload, at least I did not find that people are...

Hi, i followed this comment https://forum.proxmox.com/threads/problem-with-pass-through-cannot-change-initramfs.126627/post-631013 to fix my GPU passthrough, the lasts steps of "proxmox-boot-tool" not worked for me and now my PVE (8) is not booting. The commands i have followed was this ones...

Details: *HP ProDesk 600 G1 SFF running on an Intel core i5 4590.AMI BIOS L01 V02.65 dated 7/13/15. *Booting ISO image from DVD.(USB thumb drive install will not work regardless of BIOS config) *USB Keyboard does not respond during initial install menu selection. *Tried many BIOS configs. And...

Unfortunately PVE ships with quiet booting, the screen goes blank and then turns into login prompt. It does not use e.g. Plymouth [1] that would allow you to optionally see the boot messages. While trivial, there does not seem to be dedicated Wiki page on this basic troubleshooting tip. 1...

Hello everyone, I installed proxmox on my intel system with an Nvidia gpu. I configured the system, so the gpu could be used by one of my VMs. It worked just fine but I decided to upgrade to an AMD ryzen 7 5700x cpu instead of the intel i5 11400. The mainboard used to be a Gigabyte B560M DS3H...

Hi all, new Proxmox user here. Migrated to ProxMox this weekend after purchasing a new server and realizing Broadcom had screwed us over with our perpetual ESXi Licensing. For the most part went easy, the import tool is awesome, learned a lot (mainly install VirtIO drivers in windows BEFORE...

Hello, I recently installed Proxmox on a USB 3.2 Gen 2 stick (Kingston DataTraveler Max). The USB is rated for 1000/900 MB/s. I noticed that booting off the USB takes a long time to fully load the kernel and the initrd. Loading the kernel takes about a minute and "Loading initial ramdisk ..."...

Bonjour, We had proxmox version 7 installed as standalone (all VM in a host - no cluster) from official ISO and VMs disks were LVM. After a reboot, the host refused to boot with the following error: error: disk...

I am not an expert on Linux, I have a few VMs but this morning I woke up to the proxmox server stuck on the grub screen (screenshot attached). I tried boot and I tried https://pve.proxmox.com/wiki/Recover_From_Grub_Failure#Temporary_Workaround but it doesn't boot. Any idea on how to fix this...

Hi, after turning off the server, when I start it gives me the error that I attach in the photo, the server has two disks, one 500 GB for the operating system and one 2 TB for the VM, does anyone know how to resolve it?

Freezes on loading after update. How fixit?

Hey everyone, I’m encountering a bit of a snag with my Proxmox setup and could use some guidance. Here’s the situation: I have two NVMe SSDs in my Desktop: one with Proxmox installed and the other with Windows. When I unplug the Proxmox SSD and attach the Windows SSD, everything works fine...

Hello, In subject “ GRUB Might Fail To Boot From LVM in UEFI Mode“ https://pve.proxmox.com/wiki/Upgrade_from_7_to_8 If i’ve use ZFS on EFI mode should be not affect boot right ? Could you please suggest. Best Regard.

When Proxmox is installed via the installer (UEFI with GRUB / secure boot) it creates three partitions by default. sda1 1007K Bios Parition sda2 512M EFI Parition sda3 Parition for the main data Is there a particular reason that proxmox only has a single joined EFI/Boot partition instead of...

Hi all. I'm new to Proxmox and I wanted to install it on my old DELL T610 server before installing it on one of my production environment servers (DELL T140). I followed the instructions on https://pve.proxmox.com/wiki/Prepare_Installation_Media to setup the USB, but as I booted from it, it got...

I had a roadblock today and figured it out, but I want to understand the difference. I configured now three systems with iommu and pci-passthrough. Everytime appending intel_iommu=on at /etc/kernel/cmdline was enough. Those were on a: ASUS Prime Z590-P MSI MEG Z590 ACE ASUS B450M-K II MSI MEG...

Need help, new to proxmox as of about a week ago. Everything was good, was working for the last few hours to set up an ubuntu VM with a Cloudflare tunnel and Nextcloud. Converted my VM to a template, full cloned that template to a new VM. Before starting that VM I decided to restart my Proxmox...

I'm struggling with a replaced disk. Last time I had already issues doing this: https://forum.proxmox.com/threads/proxmox-boot-tool-status-shows-one-entry-in-raid1-system.136689/#post-610056 unfortunately this time again. One of the disks failed and I looked into the docs, the last forum post...

Hi all, I am looking for some help moving to proxmox-boot-tool now finally, after upgrading my system from 6 to 7 and now 8 over the past week (oops). The system is using root on ZFS (mirrored pair of SSDs) and booting via legacy BIOS (I am pretty sure I have the motherboard set to BIOS boot...