gpu

I am new to Proxmox and I am trying to setup GPU passthrough on a Windows 10 and MacOS VM. Machine Specs: Proxmox 8.2.2 CPU: i9-12900KS RAM: Corsair Dominator Platinum 64GB DDR5 MOBO: Gigabyte Aorus Master GPU 1: Sapphire RX6950XT Nitro+ Pure GPU 2: Sapphire RX6900XT Nitro+ SE I was able to...

So I recently picked up a couple old Optiplex 790’s, and I was wondering if they support GPU pass through. I have fiddled around with one of them (Xeon E3-1225v2) and wasn’t able to get pass through working, IOMMU would be enabled but no matter what I tried I was getting memory address errors in...

Hallo Zusammen, ich suche seit Tagen im Netz nach einer brauchbaren Lösung und eine Erklärung welche Einstellungen bei einer Windows 11 VM in den Display Einstellungen der VM die besten Einstellungen sind. Aktuell nutze ich nur die Default Einstellungen, inkluseive Standard Memory aber es gibt...

Hello everyone..i wanted to passtrough my gpu in a vm so i done this tutorial all steps after and after..https://www.reddit.com/r/homelab/comments/b5xpua/the_ultimate_beginners_guide_to_gpu_passthrough/?rdt=57987 But now i dont know where the Error is because. i added my GPU to the VM and...

I am currently trying to passthrough my NVIDIA Quadro M2000 GPU to an Ubuntu virtual machine to transcode for plex. Everything on the server boots fine, but as soon as I start up the VM with the GPU passthrough, my entire server crashes and I have to reboot. I followed these commands from this...

Hello, I have this specs: CPU: i5-14500 iGPU: UHD Graphics 770 GPU: NVIDIA Geforce GTX 1660 Super Proxmox: ver.8.1.10 ----- - I enabled IOMMU as described HERE - I need fully passthrough my GPU NVIDIA to one of my VM. It works - I lost in PVE access to /dev/dri/D128 Now, I cannot use VirtGL or...

Hello there Has motherboard with realnek network card and pci-e. I installed proxmox using gui and my graphics card. Now - when i disable my monitor (gpu is still installed in motherboard, just without any output) - it does not access from my local network. i do not know why. Journalctl is OK...

Hello Guys, I wanted to share my steps to my perfectly working GPU Passthrough setup after a lot of debugging, testing and searching for the best, working method. Maybe it helps someone. First my system specs: CPU: AMD Ryzen 7800X3D (Should Probably Work with all Ryzen 7000 APUs) GPU: Sapphire...

Hy Leute Hab jetzt mehrer Tage damit verbracht meine GPU in LXC zu nutzen. Hab mich etwas an dieser Anleitung orientiert: https://jocke.no/2022/02/23/plex-gpu-transcoding-in-docker-on-lxc-on-proxmox/ NVIDIA Treiber im LXC funktioniert soweit. Transcoding auch. Mein Problem ist aber das ich...

I'm running Proxmox on my server and recently added a AMD Raden RX 5700 XT. It is affected by the vendor-reset bug, but I solved that. I can now reboot the VMs without any errors. The GPU has 1 HDMI and 3 DP Ports. I initally connected it via HDMI to my Monitor, which is connected to a smart...

Hi, I acquired some '' old '' component and I want to swap then in my home lab. I'm actually using a i7 2600k and just found a 2700x. But I'm running a window vm in which I passed a 1070ti. I use the igpu from the i7 for proxmox. But here I don't have any with the 2700x. Can I use a second...

So i've successfully configured PCI passthrough of my Nvidia GPU to my VM. now i still want to use the Proxmox Host CLI locally via vga output on the server. of course i cant use the nvidia GPU for this since its been passthrough to the VM. i also cant use the motherboard video output since i...

Hello First of all, I want to tell you about my purpose. First of all, there is a game I want to play and it is closed to virtualization. My system is set up like this My Pc-Windows>VmWare>Proxmox First, I tried to install this, but I got a VM Error, so the game understands that I am running...

That's a lot of words! What I'm investigating if it's possible to pass an AMD Ryzen 5700U iGPU (sorry, it's a Mini PC with dual HDMI) to an LXC guest (Flatcar LXC), which in turn holds Plex. While the above is critical for video hardware encoding, the main idea is for GPU Split Passthrough...

Goal - Have hardware transcoding on a virtual machine using a GTX 1070 TI as the GPU. Achieved so far from following https://pve.proxmox.com/wiki/PCI_Passthrough#Enable_the_IOMMU. I have gotten so far to the point now where running nvidia-smi will show me Picture 1 in the VM. I can't get this...

pve version 8.1.3 Virtual machine: built cloudinit ubuntu20 When I use gpu graphics card pass-through, everything is normal, but after a while, I will find that when one of my graphics cards is mounted on the virtual machine, the virtual machine cannot start, but it can be replaced by another...

I've got a Supermicro X11SPA-TF motherboard with an Intel Xeon 6226R running Proxmox 8.1.1, and I've got a Sapphire 6600XT Nitro+ 8GB in CPU Slot 3 (x16, PCIe 3.0) and an NVIDIA 1660 Ti in CPU Slot 7 (x16, PCIe 3.0). When I assign the NVIDIA card to a VM, it boots and works fine (tested with...

Hello all, My Hardware: Proxmox 8.1.3 Motherboard - Asrock Rack Rome8d-2t CPU - Epyc 7F72 RAM - 256GB 3200MHZ ECC GPU - RTX-3080ti - passed through to Windows (tried a 2070 Super and a 2080 Super) OS Drive - Samsung 980 Pro 500GB VM OS Drives - ZFS Mirror 2x960GB Samsung P9A3 Windows VM Game...

Been bashing away at this for ~4 weeks so hitting up the forum for help.... Objective: Enable GPUpassthrough on server for use in Blender home render farm. Server; R710 24 core 72 GB RAM 2TB SSD total GPU GT 730 2GB (slim) Proxmox 8.1.3 VM of interest: Info: System has been running VMs fine...

This is likely a Linux or even a hardware/BIOS-related issue. But I'm posting here anyways in case anyone can shed some light on what might be happening or how to fix it. Thanks! I have an odd hardware problem where every few days my system's onboard HDMI will go to sleep and not be able to...