disk

Hi I have convert from HyperV a Windows Server 2022 to ProxMox in RAW. I have 2 disks. We called them DiskA and DiskB. DiskA is contains boot disk and DiskB cointans data. Its working with only DiskA But when I added DiskB want the windows do not start. I'm using: SCSI Controller...

Hello, I am getting this email constantly. How can I fix this. or is there possible to disable smartd emails ? This is the email I got many times: This message was generated by the smartd daemon running on: host name: nasserver DNS domain: The following warning/error was logged by...

Hi there! I'm struggling with a recent issue. Apparently this hasn't been an issue before as the HDDs have been running 24/7 since I started running proxmox close to 9 months ago. My HDDs spin down after about 15 minutes of inactivity. This means they are spinning down and back up anywhere from...

At the beginning of the year I converted my server from running directly on TrueNAS to Proxmox with a TrueNAS vm. At that time I was able to get all the physical disks passed through to the VM and reconfigure the RAID within the TrueNAS VM, this information will become relevant in what follows...

I have a Windows guest (Windows Server 2022, also happened on 2019) with: 80GB of memory (Host has 128) 30 processors (2 sockets, out of 32 total) SCSI Hard Disk Attached (ZFS RAID 0 was configured on install, not after) Network Speed of ~20MB/s The guest works beautifully with everything else...

Running a ProxmoxVE cluster with multiple Ubuntu VMs with the disks hosted on a TrueNAS NFS share. Occasionally one or more of the VMs will experience drastically reduced disk performance and I'm having a hard time pinpointing the cause. pve-manager/7.4-3/9002ab8a (running kernel...

Hello, If i had VM with three disks like 101,102,103 and i backup 101,103 so when restore the backup (overwrite) what happen to 102 Best Regards

There is an ssd system drive with a capacity of ~446 GB, a total of 2 disks (mdraid1 /dev/md0): /dev/pve/root 96 GB lvm thin data deleted, just a few pops /dev/pve/pve2-local-data - lvm, 342 GB. How to attach it to the qualities of lvm? Accessibility is also suitable only for this node. First...

Good day to whomever deem this thread worthy of guru knowledge! I am trying to bulk migrate my VMs from one old node to another. However, I do see the issue is that drive names are different. It is trying to migrate from local-lvm to local-lvm, however, the name of new storage is "Main-VMs". Is...

Guten Tag, ich habe mir eine 18 TB HDD gekauft und möchte diese auf eine VM weitergeben, was wäre dafür der beste Weg. Einen ZFS erstellen und das als Hard Disk auf die VM mounten? Mein Problem ist, das ich mir nicht sicher bin, ob das Effizient ist oder ob ich dabei Speicherplatz verliere...

Well, this is a little embarrasing. I was restoring my Plex VM after giving up on UEFI boot with Nvidia gpu and I have plenty of restoration points for the main boot disk. I restore the disk, and go into the hardware section to verify, and I see two unattached disks. One being my main media...

Hi, I'm not able to physically remove those hard disks so I wonder is there a way to remotely shut them down/spin them down till I'll need to use them again in few weeks/months? I'm already using pass-through in OMV VM that spins down one disk using APM (disk is used by Plex media server)...

SeaBIOS (version rel-1.16.2-0-gealb?a0?3390-prebuilt.qemu.org) Machine UUID ____________ error: attempt to read or write outside of disk 'hd0' Entering rescue mode... grub rescue> VM=Ubuntu This is my first Proxmox VM. What went wrong? I am using ZFS on a fresh install. Thanks

Hi Everyone, My sys had 2 disks 1 SSD 256 GB, and 1 HDD 1 TB, I have installed proxmox on SSD, and mounted HDD(proxmox/Disks/Directory) Even though my HDD have more space Proxmox UI shows this I followed this -> How to Add a Storage Drive to Proxmox (works with Proxmox 7)...

Following the upgrade to PVE8, I notice in the web UI two containers that show zero Disk IO. Prior to the upgrade, these displayed disk read/write stats. All other containers and VMs are displaying levels of disk IO as before. The two CTs concerned are both unpriviledged Debian 11 containers...

I'm a bit confused regarding "Disk IO" graph (per VM) in Proxmox. The different thread where this topic is discussed concludes that: which indicates to me that it's a total amount of data written/read in a particular window of time. So, from what I understand, it's a total written/read and not...

Good day. I would like to mount a partition (ext4) with data under the LXC container (alpine). Despite the visibility of the partition under the lsblk command, it does not exist in /dev Under "node" you can mount the data without any problem. Any suggestions on how to solve the problem...

OK so first up i'm sorry for asking this again, i know there are a lot of other threads like this but i can't really make up my mind for the best solution. I literally finished this build yesterday and set up some basic VMs and CTs already on the nvme drive, i also plan to buy another 16gb ram...

I have 8 disks attached to a Supermicro Backplane (SAS2 EL2 dual expander) which attaches to an HBA. When I boot into proxmox all the disks that are on the HBA are duplicated (none of the other disks are). I've tried searching online but haven't found much. I also tried just booting into a...

i found my mistake and now i dont know how delete it sorry