disk

Hello, When I delete files or free up space within a virtual machine (VM), it doesn't directly translate to an equivalent decrease in the overall disk usage of the Proxmox node . it seems that it does not affect on proxmox node. what can i do?

Hi, i have a problem with my disk (hdd) in a zfs configuration. I have one disk m.2 for proxmox, one ssd for vm and 2 4TB hdd with zfs. The problem I think is proxmox that reboot one of the hdd every few seconds and now it has 5023 power cycle. Is it correct? Beacuse when the disk reboot is...

I keep receiving the email below: This message was generated by the smartd daemon running on: host name: proxmox DNS domain: example.com The following warning/error was logged by the smartd daemon: Device: /dev/sda [SAT], Failed SMART usage Attribute: 10 Spin_Retry_Count. Device info...

Hey there! So I recently had to reinstall proxmox because I messed some things up. Now I'm left with my 3 data disks listed under proxmox(node) > Disks, but I don't see any option to mount them and use the existing vm drives located on them. Running lvs which I saw on another post here doesn't...

Hello I've a PBS that sent me email for a disk with smart problem. Replaced disk but I haven't received any email for degraded volume, replaced disk never an email message. Do you know why ? My best regards

Hello, I'm rather new to Proxmox, so please forgive my noobiness. This morning I was working on in a Windows 11 VM and all of a sudden got disconnected with an IO error. I tried rebooting the Proxmox server and still encountered the same error. I can start and run other VMs just fine, but now I...

My proxmox node show unknown status, but VMs can still be accessed. I try rebooting the node, but then it cannot boot and the VMs cannot be accessed. I show error here. Please help me, thank you guys!!

Hello, Yesterday i discovered by a complete coincidence that one of the drives in ZFS pool has completely failed without any prior notice. by a complete luck i want to check something in ZFS tab and i saw one of the pools is degraded. i go today a new 4 TB HDD and installed it, then i ran this...

I have to get on an airplane in order to visit my servers. Or use remote hands. You know how that can go. So, I'd rather not _need_ somebody visiting my servers. Or at least as little as possible. And some of its old junk. So it dies. Enter the spare disk conundrum. It's easy to find ZFS...

Good afternoon, when attempting to access the disks on my Proxmox node, an error message appears stating "communication failure (0) or Connection timed out (596)". The goal was to view all the disks of the server in order to link them to the server itself. Despite encountering this error when...

i've been using my old hardware to run proxmox with 4 hdd in a raidz, as i'm using sole old hardware to do some test with proxmox one disk have failed an now the zpool is degraded, unfortunatelly i don't have any other disk that i can change it with, so as raidz can work with 3 disk minimum and...

I need some help here. This is my first encounter with Proxmox. I made the switch after ESXi's free version went away. Here's my hardware: Dell Poweredge R710 128GB of RAM, 24 x Intel(R) Xeon(R) CPU X5670 @ 2.93GHz (2 Sockets), 6x 6TB 12Gb/s SAS drives connected to an HBA configured as a...

Moin @ all, zu einer vorhandenen VM (62101.conf) wurde eine auf ZFS befindliche Platte (Partition) aus einer ehemaligen VM hinzuigefügt. Dabei wurde die Bezeichnung der Partition*nicht* geändert, sondern nur in die config eingetragen (CLI). Somit hiessen die Platten der VM u.a...

Hello, I want to shrink the size of a vm from 100G to 30G. I booted the vm into gparted and resized the partition to 29G I shutdown the vm ran "zfs set volsize=30G rpool/data/vm-201-disk-0" to leave a little overhead ran "qm rescan" and got the message that the disk-0 has no 30G instead of...

how can i add my backup disk that has iso images in another proxmox, cause when i put this disk, normally proxmox ask for delete the disk content and inicialize GPT, but i need restore the iso, what are the steps to perform this task and mount the volume.

I'm having an issue, where the system would randomly reboot itself and all it's container and the syslog isn't putting out something useful: May 12 12:57:05 pve1 systemd[1]: Started pve-container@1005.service - PVE LXC Container: 1005. May 12 12:57:05 pve1 kernel: EXT4-fs warning (device dm-10)...

Hello everyone, I am struggling with some two-disks configuration for VM using Proxmox. I have a nettop PC that has two disks slots, in each the nvme SSD is connected. Proxmox is running on that nettop, installed on first drive. I have one VM on which Ubuntu is running an application. The first...

Hello Proxmox community, I have a problem regarding the creation of a new ZPool. I have 6 SSDs of varying size that I want to form into a RaidZ2. The GUI is no good since you need the -f to "confirm" the wasted additional space. (I also tried with same size partitions, but proxmox only shows...

Moin, wir wollen einige Festplatten Images von eine Ceph Speicher auf einen mit 10Gbit angeschlossenen NFS Speicher verschieben. Idealerweise habe ich mir eine Geschwindigkeit weit oberhalb von 100MB/s versprochen. iperf3 zeigt volle 10G Geschwindigkeit an. Nun meine Frage: Wird bei...

Hello, I am quite new to Proxmox. But last night, due to an electric blackout, my single node proxmox, with a single ssd, shuts down. At the power on the node won't boot, after few seconds the only thing I see via console is: pnp 00:01: can't evaluate _CRS: 12311 Found volume group "pve" using...