config

Hello, I have used proxmox before however this time on my new device. dell optiplex 3040m I have removed the WiFi card. When I log into root and try command /etc/network/interfaces I get told Permission denied, even though I am logged in under root. cat /etc/network/interfaces ip a Not...

VE Cluster with 5 servers - issue Hi, we have a ve clster with 5 servers, all server are: Supermicro Server CSE-819U 2x 14-Core Xeon E5-2690 v4 2,6GHz 128GB 9361-8i prox1 to prox5 have the same netconfig 192.168.1.150-154 (adminnet) There are running 2-3 vm's on eatch server with local zfs...

Dear community, I was recently dealing with /etc/default/pveproxy. I had do define an ALLOW_FROM="IPv4/Netmask,IPv6/Netmask", and this setting works fine. But the server has both, an IPv4 and IPv6 address. It seems it's not possible to use this comma-separated notation for LISTEN_IP, too. And...

Hello, I'm having a strange problem. whenever I passthrough my LSI 9210-8i [LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)] to my VM. The VM console stops working. I get this error: VM 100 qmp command 'set_password' failed - unable to connect to VM 100 qmp socket - timeout after...

Hello together, i have a question for configuring iscsi with multipathing in a huawei hypermetro storage system. We have a Dorado01 with 4 iscsi uplinks and 4 sync uplinks for hypermetro sync. The Dorado02 has also 4 iscsi uplinks and 4 sync uplinks for hypermetro sync. In the proxmox iscsi...

Hi folks, i'm a bit of a noob with proxmox. i'm pulling my hair out with anything windows on proxmox.... i have a pxe boot win10 vm (he uses pxe boot in his setup, i do not) that a friend gave me and I was able to get it booted once. I dont remember my config. I have a brand new installation...

Hallo, ich habe es geschafft, meine Netzwerkkonfig zu verhauen, leider keine Kopie gemacht ;(. Jetzt stehe ich geraqde ein wenig auf dem Schlauch, da ich unter /etc/network/interfaces nmicht genau weiß, wie es vorher aufgebaut war. Kann mir vielleicht jemand helfen? Hier wären die Infos:

Hi, I have disks with VM Windows Server but I have not saved the config from the VM. Help me restore the VM. vm-100-disk-0 pve Vwi-a-tz-- 32.00g data 0.01 vm-100-disk-1 pve Vwi-a-tz-- 4.00m data 14.06...

The Headline: I have managed to kick all 3 of my nodes from the cluster and wipe all configuration for both PVE and CEPH. This is bad. I have configuration backups, I just don't know how to use them. The longer story: Prior to this mishap, I had Proxmox installed on mirrored ZFS HDDs. I...

Hi everyone, I'm facing a serious issue. I want to create a base machine to use as a template, but whenever I do this, all the clones end up being corrupted or without an interface (as shown in the image). Could you provide me with a solution or suggest something I can do to fix the issue...

Hello, I just set up a Proxmox VE 8.2 server with a ZFS RAID 0 filesystem, but it seems that the VLAN tagging is not working correctly. Here’s what I did: I created a bond (bond0) between two physical interfaces (LACP, the networking infrastructure it's configure accordingly ). I then...

Currently, I have 3 server setups and each server has 1 SDD for Ceph storage. If 2 out of 3 servers do not work the system is not operational for write. What will happen if I add one more server with 1SSD in the pool? Will my system can handle 2 server failure?

Dear community I am pretty new to proxmox but like it so far except when it comes to VLAN's. I know there is ton of articles out there dealing with this topic and I tried quite some of them with no help so far. I have a baremetal machine that connects with two sfp+ ports to my uniFi switch...

Hello, are there any of you who can configure notifications to be sent by sms? I'm looking but haven't found anything. If someone can help me please

Hello All, so I have a bit of a funny one, which I am sure there is an obvious answer I am missing. Last night I swapped out my 16 port Unifi switch for a Unifi 48 POE switch, everything connected to it works as it should... except for my proxmox (1) server. The Server and the VM's all appear...

Hallo, ich war gerade dabei Wings einzurichten, hab dann aber gesehen dass das Herz von der Node nicht grün wird( also er sich nicht verbindet. Habe dann die Config nochmal gelöscht und von vorne begonnen, doch jetzt startet wings garnicht mehr. Hier die Fehlermeldung: INFO: [Apr 1...

Hi all, I am trying to configure my proxmox server network so that I can split VM and CT. Unfortunately with poor results. This is my configuration. If anyone can help me out, I would be very grateful. PS: I only have one NIC. Please, can someone help me? auto lo iface lo inet loopback...

I have configured the user blacklist and set it in the blacklist. In the mail filter, I put its priority at the top. However, this email was not intercepted and is usually sent to my mailbox. The PMG tracking center also has a record. When I expand the tracking center, I see that there is no...

Curious... Am I the only one who assigns their LXC/VMs to coincide with their IP. For example, I have 172.16.20.5, so I have a service LXC that's set as 2005. Or is this my OCD? :D

Moin Moin und frohes Neues alle Zusammen! In meiner Proxmox Installation habe ich folgendes Problem: Die Hauptnetzwerkkarte wird nicht richtig erkannt. Früher war es tatsächlichg mal eth0. Jetzt nach zwei neuinstallationen irgendwie nur noch lan0. Auch der Typ wird nicht angezeigt UND im GUI...