cluster

Hello there, people! Is it possible to create a Proxmox cluster using VLANs when the servers are on different subnets? Here’s my setup: Main Server: - IP Subnet: 192.168.1.x - Runs behind a router (192.168.1.1) - Has 2 NICs available New Server: - IP Subnet: 192.168.101.x -...

I am building a cluster with 2 PVE hosts and a quorum host. Each PVE host is running local storage with hardware raid. I would like have it set up in such a way that in the event of a node failure, all VMs running on one host can be restarted on another. Ideally with clustering, but replication...

I have this single node Proxmox and recently it froze out of the blue. I could not access its web interface or SSH into it. I ended up having to hard reset it. After the reboot, I went to the logs to try to make some sense of it, and found a bunch of "pveproxy" messages. Jan 22 20:21:05...

Hi to all just want to write it down, because it took my lots of time.I am trying to create a cluster with iscsi disks and lvm to test the cluster capabilities. My environment is cascaded,i mean .I have a Hp server with 3tb of disk and lots of memory. I installed Proxmox as Operating system...

I have set up a QDevice on a Raspberry Pi; with a 2 node cluster. All seems to be working and all nodes and the QDevice can see each other - see "PVECM STATUS" output below.... However, when I go to add a VM to HA, I am still getting the warning message - "At least three quorum votes are...

i have this issue with a server loosing connection to the GUI under certain workloads. or, the connection getting unstable. the VM's will for the most part keep running, though some might hang after a long time. i'm guessing it could be some kind of driver issue. i tried journalctl | grep...

Hi, I have a 5 node cluster setup with PVE 8.2.7, the nodes are using a pair of direct attached disks as an OS mirror and a ZFS pool on a 12 disk HPE D3600 Disk Enclosure using direct SAS connections to each node One of the nodes has lost connection to the ZFS pool. I am about to flatten the...

I've been giving "remote migration" a try for the first time today, moving machines live from a single host running ZFS to a new cluster running CePH. It worked tremendously well—without issues and on the first try—for all VM's but one, which always fails with the following errors. I tried...

Hi everyone, Merry Xmas! I hope someone can help with the following basic problem: I have just created my first cluster by adding a single new node. I would now like to set up the internal SSD in order to transfer some VMs over to it. However, it's not working like the master node. fdisk -l...

Ceph is great, but it needs some resources above the theoretical minimum to work reliably. My assumptions for the following text: you want to use Ceph because... why not? you want to use High Availability - which requires Shared Storage (note that a complete solution needs more things like a...

Hello, i am planning to move my one node Proxmox server with VMs to a new 3 node Cluster with Ceph Pool. Now are my questions: 1. Whats the best way to move the VMs to the according Ceph Pools on the Cluster, with minimal downtime. 2. Is there a way for testing to just copy a VM from the...

I have just finished up a full 3 node cluster/HA deployment in the lab, and I am finding it to be a time bomb for small/medium businesses due to too many single points of failure for the cluster. My concerns revolve around cluster corruption due to power failures outside of a data center...

Hello! I have bough 2 new servers and I have created cluster with those 2 nodes, now I wanna add old node which has al my VMs to new cluster and live migrate all VMs. Thing is when I try to join to cluster from old node I get this error: root@home-node-5500:~# pvecm add prox-02.domain.tld...

Hello, I work for multiple clients and one of them wanted us to create a Proxmox cluster to assure them fault tolerance and a good hypervisor that's cost-efficient. It's the first time we put a Proxmox cluster in Production environment for a client. We've only used single node proxmox. Client...

Hi everyone, I'm new here, basically this is my first post on this forum, and I do have an issue with my Proxmox. I do have two proxmox servers in cluster and, I try to add a Windows VM (from NODE1) to a domain, which is on NODE2. Unfortunately, there is no connection, the nodes have connection...

We have a cluster of 25 nodes, all machines are backed up on PBS. The last update to the latest version, on proxmox nodes on which we have VM and LXC, was carried out on 24.11. However, on 3.12 in the morning, a problem appeared with one node. CPU load on one node increased to 100%, it was...

Dear forum members, I have encountered several questions regarding the operation of High Availability in Proxmox VE and would like to discuss them with you: Why does the pve-ha-crm failover process exceed a processing time of more than 60 seconds, with a significant increase in CPU usage...

Hallo allerseits, ich bin quasi neu hier :). Ich betreibe mein Homelab mit 5 Servern seit Jahren unter ESXi und nun ist endgültig die Zeit gekommen, alles auf Proxmox zu migrieren. Ich habe das Thema Proxmox schon lange auf dem Schirm und mich immer mal wieder informiert, aber so richtig...

Hello everyone, I would like to share some issues I’m facing with a distributed 7-node cluster on Hetzner, hoping to gather suggestions or ideas on how to resolve them. Cluster Configuration: • Nodes: 7, distributed across Germany and Finland. • Purpose: Simplify VM migration and...

TL ; DR - I don't care which host the High Availability VMs move to, as long as it doesn't exceed 4 VMs per host. Can this be done? Full Story - I am planning out a 4 host cluster (and 1 QDevice) of PVE with HA active using CEPH Storage and plan to run 8 Windows Server VMs across all hosts. I...