Recent content by tobywhiting10

thanks I've added dev0:/dev/ttyS0,gid=0,uid=0 to the container config and it appears to be working. I'll post back but I've got it working with NUT just to make sure

Can you elaborate on "THE_GROUP_NUMBER_YOU_WANT" & "THE_USER_NUMBER_YOU_WANT" The line you provided definitely seems to come up a lot, but I could not find these values for a serial port, only usb devices

I'm trying to pass through a serial port to an LXC container, not a USB serial port a hardware port (specifically on the back of an R320 with a ups connected to it going to a container with nut server installed) I can find plenty of guides for USB serial adapters for things like Zigbee and Z...

I had two original data stores: /mnt/datastore/2023/ and /mnt/datastore/disk/ I wanted to remove 'disk' and create a new data store with some of the backups from '2023' I ran the following: 1. mkdir /mnt/datastore/backup/{vm, ct} 2. cp /mnt/datastore/2023/vm/<vmids to keep>...

Been running proxmox on various servers for a couple of years now. I recently just tried to upgrade my main server (Dell R320 with Intel E5-2440 0, 96gb) from proxmox 7 to 8, Upgrade when catastrophically wrong but that's not the proble here. However, because of this, I decided to do a...

hi, ls -l /dev/disk/by-label Showed that the error was caused by an old disc label which is no longer being used. This makes sense as I recently changed some disc configurations. Knowing that the disc was no longer being used I commented out its entry in cat /etc/fstab Which fixed my problem...

After recently rebooting my server Apollo power on again it fails to boot and enters emergency mode my disc configuration is: 2 SSDs in a zfs pool to make the boot drive. there is also a 3 terabyte hard disc for additional storage happy to give additional information but I don't have SSH...

I currently I only have ONE 2-terabyte hard drive which is not amazing, I know. as the disk start to reach nine years of total run time, as well as read and write speeds starting to become more important, It's definitely time for an upgrade. I don't think we can we dispute that. I would like...

no problem

That fixed it and it's working now for any future readers of this thread: I had to run command: sudo nano /etc/apt/sources.list.d/pve-enterprise.list as directed in this document. in order to comment out the enterprise repository deb https://enterprise.proxmox.com/debian/pve bullseye...

Thanks I'll look into it

Hi, I've seen a few threads (like this, and this) talking about a similar issue but I still cannot quite get it fixed. So sorry if I'm repeating something here. I am constantly getting "apt-get update" error messages accumulate overtime whenever I log in (see image) Other threads have talked...

Just thought you might want to see task manager

hello OK so quick back story. I ordered some new hard drives for my proxmox server, so I am going to reinstall proxmox on the new hard drives and then restore from proxmox backup server to get back to working order. I already have proxmox backup server configured and running on a separate...