Proxmox+ceph on partition

[Morbious]

Recently for testing purpose I set up 3 nodes with proxmox.
I did it with local disk, but wanted to try how ceph will work on it.
I don't have any spare disk on my testing facility , but I use partition for ceph using this documentation:
ceph.com/geen-categorie/create-a-partition-and-make-it-an-osd/
Everything is almost OK except that partition which has 10 TB is shown as 10 GB.
Can anyone help me what is wrong ? As I said it's just for testing purpose not production.

 

[Jarek]

ceph.com/geen-categorie/create-a-partition-and-make-it-an-osd/

This is outdated.
Use lvm and ceph-volume:
http://docs.ceph.com/docs/master/ceph-volume/lvm/prepare/#bluestore

 

[fabian]

This is outdated.
Use lvm and ceph-volume:
http://docs.ceph.com/docs/master/ceph-volume/lvm/prepare/#bluestore

please don't. ceph-volume is still very much in development, and despite what upstream says, not yet stable.

 

[SiriusNZ]

I'm also interested in this issue, I'm also getting partition-based OSDs showing up as 10GB, irrelevant of the actual size of the underlying partition. I haven't figured out why yet and can find no other discussion about it.

This setup is because I'm using some unpartitioned space to "dip my toes" into Ceph on my three-node home rig, prior to committing $$ into buying dedicated discs to use as proper OSDs, and the backplanes+controllers to hold them.