Hi guys, a new version is on the signed APT repository: 0.4.0+stock4.14~exp233. It changes how QSM gets into the PVE web page, it lets the TCP 8006 gateway carry other services of the node, and the console can now show a VirGL GPU that runs...
Hi guys, this is mostly for people who write or install add-ons for the Proxmox VE web UI.
Proxmox VE has no plug-in API for its web page. An add-on that wants a button, a menu entry or a panel row has to get its script into...
Werte Community,
ich benötige eure Hilfe, denn ich komme so nicht weiter.
Ein paar Infos:
Der Fehler den ich erhalte ist:
apt-get dist-upgrade
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done...
Die neuen Karten klappen annehmbar. Fans auf etwa 30%. Sieht so aus, als ob der Raum bzw. Schrank zu warm bzw. dicht sind. Da braucht es wohl noch mehr Zirkulation, wenn das jetzt schon bei Winterbeginn warm wird.
Ich hab jetzt luxuriös die...
Hi guys, I would like to show a small project and hear what you think: qdev-host. It adds PCIe devices to running VMs of a stock PVE 9 node and takes them out again, from the VM's Hardware panel or from the shell. Nothing in QEMU or Proxmox is...
I tested the metrics export endpoint manually on one of our PVE nodes using the suggested command.
Surprisingly, it took approximately 9 minutes and 11 seconds to complete.
Our Proxmox VE are running on 9.2.18.
Given the size of our...
Die neuen Karten klappen annehmbar. Fans auf etwa 30%. Sieht so aus, als ob der Raum bzw. Schrank zu warm bzw. dicht sind. Da braucht es wohl noch mehr Zirkulation, wenn das jetzt schon bei Winterbeginn warm wird.
Ich hab jetzt luxuriös die...
For anyone landing here from search: I published a small add-on that groups the Server
View tree into colored sections (two levels, custom order, set up from a screen in the web UI), based on regular tags...
Sorry for bumping an older thread – in case anyone still looks for this: Tag View helps,
but I wanted something in the regular Server View, with each guest in a single group,
colored headers and a custom order. I put together a small add-on that...
Die optimale Lösung für reibungsloses Failover ist Spiegelung. Das nützt aber NUR bei HW-Ausfall. Wie häufig kommt das vor? Als Absicherung gegen Ransomware und auch "Kaputtspielen" taugt das überhaupt nicht, denn idealerweise sind Spiegel und...
Thanks I took that and added a text file list so you can manage the vmids that get backed up for that job, retention options for that job, and fleecing options to reduce timeout errors.
Here is the updated script.
#!/bin/bash
#...
Only the panels are cropped in the screenshot, so the rest of the dashboard isn't visible. Are your remotes added, and do they show up as online in the remote overview with their nodes and guests listed? If they don't show there, the top-lists...
Yes, I'm pretty sure that's the cause. As far as I know the top lists come from the metrics PDM collects itself via that export endpoint, not from the live status in the overview. That's why remotes, nodes and guests look fine while the panels...
die snapshots sind ja da und können auch verwendet werden? du musst halt entweder einen klon anlegen, oder die snapshots dazwischen verwerfen/entfernen wenn du wirklich auf den zustand zurückgehen willst und dir die änderungen danach egal sind.
It is possible, it is also possible it was already disabled. I don't know what NIC you are using. You should be able to check supported modes in your documentation.
Make sure you disable it on both card, you can also try to disable various other...
On very large upgrades (e.g real dist-upgrade with potential damage) I utilized ZFS checkpoints. It will "snapshot" the whole pool = all volumes w/ all snapshots at once.
This is not applicable in all situations and not meant to be used on a...
Nur ein paar Gedanken zu den Antworten hier: Fühlt euch frei, mich zu korrigieren, falls ich falsch liege.
1. Wenn zwischen Ransomware-Angriff und -Ausbruch Monate liegen, gilt das doch auch für die Backups. Das heißt, alle Backups der letzten...
I tried running `ethtool -K <nic> gro off lro off` and it gave me this output:
~# ethtool -K nic3 gro off lro off
Actual changes:
rx-gro: off
rx-gro-hw: off [not requested]
It seems "lro" does not work on my systems.