Latest activity
-
Eelesouef posted the thread Configuring "Base DN" for realm sync (MS AD domain) in Proxmox VE: Installation and configuration.Hello, Is there a way to configure the Base DN for realm synchronization (with an MS AD domain) ? We have a large AD domain with severel thousand objects and would like the sync jobs to not overload our domain controllers. I saw there are...
-
TTErxleben replied to the thread EFI, TPM Partitionen.Gilt für die ursprüngliche Win10-Installation. Die wurden auch immer gelöscht und es war Ruhe im Karton. Bei upgrade auf Win11, werden aber die nötige EFI und TPM-Partition hinter die c: gepflastert.
-
Stoiko Ivanov reacted to showiproute's post in the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve with
Like.
auto bond0 iface bond0 inet manual bond-slaves eno1np0 eno2np1 bond-miimon 100 bond-mode 802.3ad bond-xmit-hash-policy layer3+4 auto vmbr0 iface vmbr0 inet manual bridge-ports bond0... -
Stoiko Ivanov reacted to Dark26's post in the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve with Like.
lacp for the bond also here
-
Stoiko Ivanov reacted to ManuS's post in the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve with Like.
extract from /etc/network/interfaces : The bond is attached to vmbr1, which is VLAN-aware and carries several VLAN interfaces including the management network. I will now test with "pci=notph" added to the kernel command line and collect a new...
-
bbgeek17 replied to the thread Create a cloud init vm using API only.My mistake, my reading of your initial post was you are using Proxmoxer to create a PVE template VM. It appears that these are two independent flows that you are trying. The wrapper is only as good as the API request it creates. If it omits the... -
MManuS replied to the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve.extract from /etc/network/interfaces : The bond is attached to vmbr1, which is VLAN-aware and carries several VLAN interfaces including the management network. I will now test with "pci=notph" added to the kernel command line and collect a new...
-
Falk R. replied to the thread EFI, TPM Partitionen.Hi, Windows legt doch nur die Recovery Partition hinter C:. Die kannst du auch getrost löschen und dann steht dir nix im Weg. Habe ich schon ganz oft so gemacht. -
DDark26 replied to the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve.lacp for the bond also here
-
Falk R. replied to the thread USV Software Empfehlung für APC und Proxmox Cluster.Kann ich nicht bestätigen, mir hat CyberPower gut weitergeholfen. NUT ist aber nicht so Easy zu nutzen und zickt eher mal rum. Im Mittelstand gibts auch viele Admins, die gar keine Ahnung von Linux haben und trotzdem gut mit Proxmox klar kommen...
-
Sshowiproute replied to the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve.auto bond0 iface bond0 inet manual bond-slaves eno1np0 eno2np1 bond-miimon 100 bond-mode 802.3ad bond-xmit-hash-policy layer3+4 auto vmbr0 iface vmbr0 inet manual bridge-ports bond0...
-
Rryukurr reacted to richardh_nz's post in the thread Intel 125U chipset unusable with proxmox or bad hardware? Constant system hangs/freezes - FIX: Pre-allocate iGPU memory using lgfx Gsm2 in BIOS with Like.
FIX: Pre-allocate fixed iGPU memory using lgfs Gsm2 setting in BIOS After some additional troubleshooting involving borrowed memory that worked perfectly without hangs (Kingston KVR56S46BS8-16 PC5 5600 CL46) I finally got the system stable using...
-
Stoiko Ivanov replied to the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve.Thanks for the logs! could you try booting with `pci=notph` added to the command-line (might have a detrimental effect on performance) also - as most logs here (for the broadcom nics) look like the NICs are in a bond - which bond-mode is used...
-
Aaklj_ekj replied to the thread Server-Disk I/O delay 100% during cloning and backup.Found a "workaround": > https://forum.proxmox.com/threads/hung-on-restore-since-upgrade-to-kernel-7-proxmox-9.183717/ Don't know if it applies to this problem
-
fiona replied to the thread Create a cloud init vm using API only.That might be the issue. You would have to rename your image to .qcow2. In the future, it will be possible to select the format upon download. Patches are applied in git already, but not packaged yet. -
GHallo, ich suche eine Konfigurationsmöglichkeit, dass ich mit PRTG meinen PVE überwachen kann. Leider habe ich dazu noch keine wirkliche Lösung gefunden. Gruß N
-
Aaklj_ekj replied to the thread Hung on restore since Upgrade to Kernel 7 / Proxmox 9.Update on this - with the help of AI I was able to find a "workaround": If I restore with the following changed parameters the system wont hang indefinitely: echo none > /sys/block/sda/queue/scheduler echo 0 > /sys/block/sda/queue/wbt_lat_usec...
-
Francois Baillargeon replied to the thread PVE 9.2.5 – Intermittent segfaults, cpuidle/RCU warnings and previous kernel panic on i7-14700K / ASUS B760.I would absolutely hammer that with Memtest86 yes. It is a rather big ram config on non-ECC ram, that would at bare minimum bring that out of the way. -
Glad it helped, @ns33. With U.2 and 100Gb, PCIe placement matters. On dual socket, keep your NVMe and the NIC carrying Ceph traffic on the same socket so I/O isn't crossing the inter-socket link. cat /sys/bus/pci/devices/<addr>/numa_node will...
-
DDennigma replied to the thread [SOLVED] Regression in 7.0.14-20-pve: Realtek RTL8168h/r8169 fails with PCIe AER/DPC error – 7.0.14-19-pve works.I tried some things, apparently it helps to use the grub parameter GRUB_CMDLINE_LINUX_DEFAULT="quiet nosplash debug pcie_aspm=off" It seems to be a bug with the energy saving of the kernel, the default drivers don't support this fast silence /...